Reviews Butt weld Fittings

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

PSCCO 4PCS Butt Welding Clamps Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • A set of 4 Intergrips firmly fix the flat or curved panel edge-to-edge and surface-to-surface to achieve a good clean connection..
  • The welding clamp is made of galvanized steel, which can prevent rust and is easy to install or disassemble..
  • Butt welding tongs can fix workpieces for precise butt welding and side-to-side welding..
  • A large number of fixtures suitable for any welding kit. The gap between the board and the board is maintained at 0.40 inches for edge-to-edge welding..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed fitting threads.
  • Always wear protective welding helmets and welding gloves when working with welding equipment.
  • NO MORE CRACKS: Other welding torch kits often include low-quality plastic hoses that easily crack and leak to create a disastrous fire hazard with imminent failure to look forward to, but this welding equipment oxygen acetylene torch kit hose is constructed from acetylene rubber for maximum strength and durability.
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check Stock

SÜA - Ligth Duty Welding/Brazing Torch Handle Compatible with Victor Series J + Welding Tips

  • READ THIS BEFORE YOU BUY: ***This Torch handle fits ONLY Series W-J Acetylene Tips Compatible with Victor - Series W or W-1 Tips WILL NOT FIT THIS....
  • READ THIS BEFORE YOU BUY: ***This Torch Handle has 3/8"-24 (Type "A") Hose Fittings - Twin Hoses with 9/16"-18 (Type "B") Hose Fittings WILL NOT FIT....
  • READ THIS BEFORE YOU BUY: ***Please note that this outfit WILL NOT FIT disposable oxygen and fuel gas canisters. It will ONLY fit model MC Acetylene....
  • This torch has been designed to cover the full range of light-duty welding and brazing needs. Its size and maneuverability makes it ideal for the....
  • Welding Torch Handle, Welding torch handle with 3 welding tips and a full Set that includes.
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

STKUSA Gas Welding and Cutting Torch Kit Victor Type

  • Perfect for welding, soldering, cutting, gauging and other applications.
  • Nozzle #1 and No. 0, 2, 4 Welding Nozzles.
  • A complete set includes a torch handle, oxygen regulator and acetylene regulator.
  • Victor-style welding kit includes multiple nozzles, hoses and fittings for all purpose welding, soldering, and other applications.
Check Stock

Forney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock