Reviews Butt Welding Pipes

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • 【WIDE APPLIACTION】Manually Operated HDPE butt fusion welding machine is suitable for PE and PP pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory.
  • 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single ....
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

WONGWAI 4 PCS 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve, Stainless Steel Exhaust Clamp for Exhausts, Mufflers, Downpipes

  • ... exhaust clamp has an overall 360-degree clamping force without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system..
  • WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds..
  • MONEYBACK GUARANTEE - WONGWAI promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to contact us, and we will make sure to provide the best service..
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • 1.[Description]: Voltage: 110V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manua....
Check Stock

PSCCO 4PCS Butt Welding Clamps Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • A set of 4 Intergrips firmly fix the flat or curved panel edge-to-edge and surface-to-surface to achieve a good clean connection..
  • The welding clamp is made of galvanized steel, which can prevent rust and is easy to install or disassemble..
  • Butt welding tongs can fix workpieces for precise butt welding and side-to-side welding..
  • A large number of fixtures suitable for any welding kit. The gap between the board and the board is maintained at 0.40 inches for edge-to-edge welding..
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • 1.[Description]: Voltage: 220V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

Jackson Safety Pipe Marker Centering Tool, Curv-O-Mark Standard 6, 14775 - Use to measure Pipes 0.5\ and Up, Standard 4\ Y-Type Head, Adjustable Dial Set Level

  • PIPE MEASURER – This easy-to-use marking tool is designed for pipe fitters and welders as an economical measuring tool for setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways, and measuring declivity.
  • STANDARD SIZE – This Curv-O Standard #6 model level tool may be used on pipes and tanks that measure one-half of inch in diameter or larger.
  • Y-HEAD – The center finder has a 4 inch Y-type head fitted with an adjustable dial bubble protractor (DSL).
  • BEST OPERATION – Use this manual Jackson Safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe marking.
  • SAFETY STANDARDS – When it comes to providing innovative safety solutions, welding tools with unparalleled features, long-lasting value, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

  • ...se for pipe fitters and welders as a must have tool..
  • 【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
  • 【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and tangent chart, this pipefitter tool can help you make straight lines around pipes. When judging the horizontal state, the bubble of the green liquid needs to be in the middle of two lines on the protractor. 【Note:】When determining the angle, the bubble of the green liquid should be in the horizontal position whatever the angle is..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock