Reviews Bushing Metric

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

CTS 500K Push Pull Short Shaft Audio Taper Potentiometers - Pair 2X - Includes Wiring Diagram

  • High Quality CTS Push Pull Pot - brass bushing and shaft.
  • Short Shaft (3/8" bushing height), 24-tooth fine spline shaft.
  • Double Pole Double Throw allows modification including coil splits, coil taps, phase shifting.
  • Not intended for use with import guitars using metric components.
Check Stock

(3x) CTS 450G 250K Brass Short (1/4\) 10% Audio Taper Potentiometers for Electric Guitar

  • 250K Short Split Audio Taper Pots - 10% Tolerance - suitable for tone or volume control.
  • 1/4" High X 3/8" Diameter Bushing, 24 Tooth Fine Spline Shaft Solid Brass Bushing & Shaft.
  • Low Friction Rotation & Bakelite base plate.
  • CTS 450G Series Made Specifically for Use in Guitars.
  • Imperial Sized - NOT for import guitars using metric components.
Check Stock

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

  • 【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
  • 【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
  • 【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
  • 【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
  • 【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..
Check Stock

Milescraft 12190003 CircleGuideKit

  • Small circle jig cuts circles from 1.5" to 12".
  • large circle jig cuts circles from 10" to 52".
  • Both the small and large circle jigs have built in metric and imperial scales, with an easy readout window for setting the diameter of both your....
  • Both the small and large circle jigs quickly and easily attach to the included TurnLock circle guide head.
  • Bonus 13" offset base provides added stability when finishing the edges on your work piece using your router, oversized handle knob is easy to grip....
  • Equipped with the patented TurnLock technology allowing for fast tool-free guide bushing and router attachment exchanges.
Check Stock

Accusize Industrial Tools No 60 Metric H.S.S. Keyway Broach Sets in Fitted Box, 5100-0060

  • All broach sets are furnished in handsome varnished boxes, and come complete with precision roaches, slotted bushings, and necessary shims.
  • Bushing Dia. Bore Size Plain only, 6, 8, 10 mm.
  • The most common metric keyway combinations for small keyways and bores.
Check Stock

RotoZip SS355-10 120V Spiral Saw Kit 5.5 AMP w/ CRCT4 Circle Cutter Guide

  • Small circle Jig cuts circles from 1. 5" To 12" In diameter.
  • Large circle Jig cuts circles from 10" To 52" In diameter.
  • Both the small and large circle jigs have built in metric and imperial scales, with an easy readout window for setting the diameter of both your inside and outside cuts.
  • Both the small and large circle jigs quickly and easily attach to the included turn-n-lock circle guide head.
  • Bonus 13" Offset base provides added stability when finishing the edges on your work piece using your router, oversized handle knob is easy to grip providing superior control of your router.
  • Equipped with the patented turn-n-lock technology allowing for fast tool-free guide Bushing and router attachment exchanges.
Check Stock

Rockler Taper Jig / Straight Line Jig - Power Tool Accessory Jigs Makes Tapered Cuts Fast - Wood Cutting Jig is Perfect for Chair Legs - Hardware Jig Includes 36” Miter Bar – Table Saw Accessories

  • Clamp both boards simultaneously for precise hole alignment.
  • Drill up to six matching holes per setup for stronger joints.
  • Up to three 1/4", 5/16" or 3/8" holes using hardened steel bushing blocks.
  • Includes detailed instructions to product corner, edge and surface joints.
  • Please review specifications to ensure this product will meet your project’s dimensional requirements (Imperial or Metric Units).
Check Stock

1/4' Beadlock® Tenon Stock, (25) 1-1/2' Pieces

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center. Simply align the precision-machined notch on the jig's center bar with the dowel location mark on your board, hold the jig and drill..
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center bar, insert the pin in a hole and drill more holes..
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of face frame stiles and top and bottom rails. The handy inch scale lets you accurately set the stop..
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4” thick..
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in imperial (inch) sizes,1/4" 3/8" 5/16" ,not metric..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock