Reviews Bushing Installer

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

Maureen 29090 Anchor pin Bushing kit (Truck)/Bushing Removal Tool/Bushing Tools, Black, 14.5 x 4.75 x 1.25

  • This professional grade subframe bushing installer and remover tool set is compatible with BMW E32 E34 E38 E60 E65 E66..
  • For replacing the subframe bushings without the need for removing the rear axle assembly..
  • The fine thread and thrust bearing allow the bushing to be fitted quickly without hassle..
  • It is Ideal for replacing the subframe bushings whilst still on the vehicle, and without the need for removing the rear axle assembly..
Check Stock

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

  • 【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
  • 【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
  • 【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
  • 【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
  • 【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..
Check Stock

Alltooetools Subframe Bush Removal Tool Kit Compatible with BMW E32 E34 E38 E60 E65 E66

  • Includes One Bushing Remover/Installer Kit.
  • Features a Design that Allows Replacement of the Rear Axle Carrier Ball Joint with the Carrier in Place.
  • Offers Service for: E38, E39, E52, E53, E60, E61, E63, E64, E65, and E66.
  • Applications Include: BMW 528i, 528i Wagon, 540i, 540i Wagon, 525i, 525i Wagon, 530i, 740i, 740il, 750il, and all 1995 - 2003.
  • Expertly Designed and Crafted to the Exacting Standards Expected from CTA Tools.
Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

  • Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
  • The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
  • Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
  • The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
  • We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check Stock

OA-BRES 4-1/2 inch Diamond Blade Turbo Diamond Cutting Wheel for Angle Grinder Dry and Wet Smooth Cutting for Tile Concrete Stone Masonry Brick Block Arbor 7/8 7/8 -5/8 and 7/8 -20mm Bushing Include 3-Pack

  • DURABLE: OA-BRES diamond blade use fully hardened steel blade body ensure the low amplitude and low noise of the product during high-spe , with Extra....
  • EFFECTIVE：Diamond Cutting Wheel adopts advance pressing process, more quantities and higher-grade diamonds provide more efficient cutting and extra....
  • APPLICATION: Turbo tile saw blade can be used for both dry and wet, smooth cutting for ceramic, tile, concrete, stone, brick, masonry, block,....
  • FIT SIZE: 4-1/2-Inch(115mm) concrete blade with 10mm height segmented, arbor: 7/8-Inch(22.22mm), 7/8"-20mm and 7/8"-5/8" bushing inculde, MAX RPM....
  • BEST CHOOSE: Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast, or work at your home studio, Whether it is....
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock

Patio, Lanai and Garage Window Screen Installer Clips (20 Pack Clips)

  • The "Original" Screen Installer Clips: This package contains 20 Screen Installer Clips that will assist you with installing and fixing Window/Door Screens. This makes the process much easier and makes this a 1 person job. The Screen Installer Clips will save you time and effort when installing patio, lanai, porch , window, door, and garage screens. Recommended to use with Plastic Screen Rollers to avoid rips..
  • Features: This tool allows you to get your screen tight while working by yourself. Simply pre-roll your screen into the spline groove, then place screen clip into groove to hold into place. Repeat this process around the frame. Then install spline into groove and remove screen clips as you go. Our Screen Installer Clips now have rounded edges to make it easier to squeeze into groove. Used to assist in securing and hanging Patio, Lanai, Porch, Window, Door and Garage Screens..
  • High Quality Materials: Our Screen Installer Clips are made of Carbon Steel with a White Zinc plated finish..
  • New Design: Our new and improved rounded sides make it easier to squeeze, but still hold the screen in place. We made this change based on previous customer feedback..
  • Applications: They can be used to help install and repair all Fiberglass screens, including: Heavy-Du....
Check Stock

CGH Cute Girls Hairstyles! Jewel Blinger Installer Hair Kit with Hearts Studs & Pearls

  • Hairstyling kit with jewel installer tool and a variety of jewels.
  • Use the installer to add hearts, studs and pearls to your braids.
  • Includes nine hearts, nine studs, and nine pearls.
  • Also includes tips booklet with instructions for using the installer.
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock