Reviews Bus bar Insulation

GCAN-207 RS232/485 to CAN Converter,Realize bidirectional Communication Between RS232 or RS485 Bus and CAN Bus

  • Standard serial port level, RS232 model or RS485 model can switch by software.
  • Conversion direction can be set to: CAN?? Serial, CAN?Serial, CAN?Serial.
  • Serial Bus baud rate range from 600bps to 115200bps.
  • CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS 11898 standards.
  • CAN-Bus baud rates range from 5Kbps to 1Mbps.
  • CAN-Bus interface with electrical isolation.
  • CAN-Bus isolation converter insulation voltage: DC 1500V.
  • Working temperature range from -40 to 85 °C.
Check Stock

BUD Industries BB-32623 Plate Mounted Breadboard-6 Terminal Strip 11\ L x 8.8\ W x 0.3\ H, Gray

  • ...ble, and extends the application scope of CAN-Bus..
  • CAN Features ? Integrated 1 CAN-Bus interface with terminal ? CAN-Bus signals : CAN_H, CAN_L, CAN_GND ? CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS11898 standards ? CAN-Bus baud rates range from 5Kbps to 1Mbps ? CAN-Bus isolation converter insulation voltage: DC 1500V.
  • Modbus Features ? Modbus slave support function code: 03H, 04H, 06H, 16H ? Support Modbus RTU or TCP ? Support heartbeat and timeout interrupt function ? The working port is fixed, the node address can be set.
  • Hardware Features ? High-speed 32-bit processor ? Embedded hardware watchdog timer ? Power supply voltage: DC 24V ? Maximum current: 40mA ? Electrostatic discharge immunity level: contact discharge ± 2KV, air discharge ±15KV ? Surge immunity level: ± 1KV ? Operating temperature range: -40 ? ~ +85 ? ? Operating humidity range: 5% to 95% RH ? Electrical fast transient burst immunity level: ± 1KV.
  • Working mode Trace mode When Modbus master writes corresponding address data of Modbus with a 06 instruction.If the data changes,it will trigger the corresponding data transmission of CAN. Timer mode Users can set interval time in "Send Timer.
Check Stock

DaierTek 12V Bus Bar 6 x 5/16 M8 Terminal Studs 12 Volt Power Distribution Block with Cover Battery Bus Bar 12V - 48V Positive & Negative for Automotive Car Boat Solar System

  • 【Product Name】- Battery bus bar terminal block, these busbars will come in pairs, include one positive bus bar (red one) and one negative bus bar (black one)..
  • 【Terminals & Rating】- Each 12v power distribution block includes - 6 x M8 (5/16") terminal studs. This battery distribution block can handle voltage @ Max 300V AC, 48V DC, and continous amperage @ Max 130A AC, 150A DC..
  • 【Round Corner Base】 - The 12v bus bar is unique round corner base design, which makes the battery terminal block unique and special, looks more extraordinary compared with other busbars..
  • 【More Open Area Design Cover】 - The cover of this 12v power block will allow 180° wire lug installation and can meet variety kinds of installat methods of end terminals..
  • 【Application】 - This marine power distribution block uses copper plates and stainless steel terminals as conductors, which enables the battery distribution block to work in extreme environment, suitable for automotive, car, marine, boat, etc..
Check Stock

Blue Sea 5064 In-Line Fuse Holder f/ATO & ATC Fuses

  • Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits.
  • Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud,....
  • Positive distribution bus with #10-32 stud.
  • Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is....
  • Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels.
Check Stock

Blue Sea Systems 5026 ST Blade Fuse Block 12 Circuit with Ground and Cover

  • Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits.
  • Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer.
  • Positive distribution bus with #10-32 stud.
  • Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open.
  • Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels.
Check Stock

4 Post Power Distribution Block Bus Bar Pair with Cover - Made in The USA - 250 Amp Rating – Marine Bus Bar Automotive and Solar Wiring – Battery Terminal Distribution Block - Set of 2 3/8”

  • Ideal for Automotive, Solar and Marine Use - Our 250 AMP 4-post power distribution block busbar is ideal for automotive, car audio, solar, and marine use. Whether you need to consolidate, distribute, or protect your electrical system, our bus bars are excellent for managing wires and distributing power..
  • Includes Both Red and Black Connectors - With these 2 packs of 4 post power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals with 3/8" holes. The 4-way bus wiring block will make setting up your electrical systems quick, neat, and easy..
  • Anti-Corrosive & Even Consistent Flow - Our bus bars 12v are anti-corrosive and constructed to handle high currents. The nickel-plated brass contact plate ensures even and consistent flow and stability. Wire up to 4 accessories. Each bus bar terminal block includes a cover to protect connections from damage and corrosion..
  • Keep Your Wires Neatly Organized- With these power distribution blocks you can finally organize your wiring, so it doesn't look like a rat’s nest under the hood anymore. Use our power distribution bars for your car, truck, RV, boat, Yacht, Solar systems, and any other cable combination you can think of..
Check Stock

Heart Horse Bus Bar Terminal Block 1/4 Power Stud Battery Junction Block Post Distribution Block Insulated with Cover DC 48V 150A for Auto Truck RV Boat 1/4 ,Red+Black

  • WORKING RATING - Power stud size: 1/4".Maximum working voltage is DC 48V & up to 150 Amps.The battery bus bar is measured 1.77" x 1.69" x 1.4"..
  • EASY TO USE - Each bus bar with a cover can prevent short circuits and is completely safe.The cable can be installed with a wrench without removing the cover..
  • DURABLE & DEPENDABLE - The bus bar has good electrical conductivity and corrosion protection for durability.Terminal block's material is stainless steel, insulated base..
  • EFFICIENTLY DISTRIBUTE POWER - With these power distribution block, you can organize your wiring cleanly and keep your environment clean and tidy..
  • APPLICABILITY - Battery junction block is widely used in motorcycles, cars, trucks, RVs, etc..
Check Stock

Circuit Breaker Buss Bar Combing Terminal Block Pure Copper PVC for Schools Hospitals Hotels Home(6 way)

  • Applicable Circuit Breaker: The single row bus bar can be connected to C45 type, DZ47 type, IC65N type and other small circuit breaker air switches..
  • PVC Shell: The dustproof shell protects the internal aging, makes the busbar have a longer life, and has the characteristics of insulation, high temperature resistance, and not easy to break..
  • Wear Resistance: The precise production for durable use, will not cause serious wear and tear due to too many installations, and can no longer be re‑installed..
  • High Quality Material: Made of pure copper, with the features of high current carrying capacity, good conductivity, large overcurrent, convenient wiring and not easy to oxidize..
  • Wide Application: The busbar can be widely used in circuit breakers in enterprises, construction sites, schools, hospitals, hotels, homes and other places..
Check Stock

Bopaodao Copper Bus Bar 3mm x 25mm x 5.91 inch / 150mm, 1Pcs C110 Pure Cu Copper Flat Buss Bar Stock

  • 1Pcs c110 copper flat bus bar, 3mm x 25mm x 5.91 inch / 150mm, about T 1/8" x W 1".
  • Copper flat bars are widely used for electrical applications for the high electrical and thermal conductivity. Due to its exceptional strength, ductility and corrosion resistance, copper flat bar is also typically used in architectural applications. Uses of copper flat bar include automotive, construction, machined components, roofing, industrial, electrical, fabrication, engineering, manufacturing, marine equipment, architecture industries.
  • As a factory seller, we would like to accept any customization about the copper bar, including the length, drilling and bending or any other special needs, please contact us.
  • The copper bar is made of 0.999 copper, which is the C110 Cu, we also provide tinned copper bar and Nickel-plated copper bar.
  • Copper bars are also called copper bus bars or copper buss bars. They are made of copper and have rectangular or chamfered (rounded) rectangular cross-sections. (Nowadays, rounded copper bars are generally used to avoid tip discharge). The circuit plays the role of conveying current and connecting electrical equipment. Sometimes it can also be made as crafts or decorations.
Check Stock

Wirefy Wire Spade Connectors - Female Wire Connectors Kit - Quick Disconnect Wire Connectors - Electrical Spade Terminals - Blue 16-14 Gauge - 150 PCS

  • QUICK DISCONNECTS - Male/female spade connectors can be easily mated and pulled apart. They are convenient for applications that require frequent connections. Female spade connectors work great for bus bar and fuse box installations..
  • PROFESSIONAL SPADE CONNECTORS - Our spade connectors are crafted from high quality copper, as well as heat shrink tubing with adhesive lining. These terminals crimp, shrink, and seal well..
  • STRONG CRIMPS - Double barrels designed to ensure stronger crimps. Heat shrink tubing adhesive glues to the wire insulation for enhanced tensile strength. Your wire will not slip out..
  • VALUE PACK - This kit includes 150 blue heat shrink female spade connectors. These spade connectors will fit any wire 16 - 14 AWG..
  • LIFETIME WARRANTY - All Wirefy electrical connectors are backed by our best-in-class warranty..
Check Stock

NESGLODUO Copper Flat Bar - Copper Bar Stock, Copper 110 Flat Bar, 0.24in x 1in x 12in

  • 【Size】It is a solid bar of copper: 12''L x 1''W, 0.24'' thickness and weight is 14.11 ounces, no more no less, good size for the electrical project you're looking for..
  • 【Material】Copper flat bar is made of copper, grade as C-110. It's thick enough and conducts heat well, so burn through is mitigated, if you need something to soak up heat this works well..
  • 【Features】Easy to cut and drill, and work great for your intended use. My uncle easily fabd a bus bar system for his new X-S-3400s, good investment compared to custom machined pieces that are 3-4x the cost..
  • 【Copper 110 Flat Bar】It would carry current with no issues and work well for your project such as make a bud bar for electrical project, or bus bar for battery connections..
  • 【Application】Copper flat stock is suitable for various milling, craft, lathe, knife project, battery terminal L brackets, home solar battery bank, or others electrical engineering..
Check Stock

150 PCS Wirefy Female Spade Connectors - Heat Shrink Spade Connector Kit - Quick Disconnect Wire Connectors - Electrical Spade Terminals - Red 22-16 Gauge

  • QUICK DISCONNECTS - Male/female spade connectors can be easily mated and pulled apart. They are convenient for applications that require frequent connections. Female spade connectors work great for bus bar and fuse box installations..
  • PROFESSIONAL SPADE CONNECTORS - Our spade connectors are crafted from high quality copper, as well as heat shrink tubing with adhesive lining. These terminals crimp, shrink, and seal well..
  • STRONG CRIMPS - Double barrels designed to ensure stronger crimps. Heat shrink tubing adhesive glues to the wire insulation for enhanced tensile strength. Your wire will not slip out..
  • VALUE PACK - This kit includes 150 red heat shrink female spade connectors. These spade connectors will fit any wire 22 - 16 AWG..
  • LIFETIME WARRANTY - All Wirefy electrical connectors are backed by our best-in-class warranty..
Check Stock

Victron Energy Lynx Power in Battery Connector

  • The lynx power in module is used to connect batteries via an external fuse, It can be useful if you have multiple parallel strings.
  • The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables.
  • It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.
  • A modular DC bus bar, the Victron Lynx Power In is used to connect batteries to the Lynx DC distribution system.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock