Reviews Bus Ic Card Terminal

8 Terminal Bus Bar Terminal Block 10 Pack Brass Wire Screw Terminal for Car Boat Marine Ground Power Distribution Terminal Block

  • Brass terminal grounding strip bus bar block with 8 screws & 2 Stud.
  • High quality plastics base ensures great mechanical strength and durability.
  • Use M4 screws to fix it in place through the two screw holes on both ends of the terminal.
  • Widely used in power distribution cabinets, distribution boxes,mechanical equipment factories,electrical equipment factories,etc.
Check Stock

SunFounder Reader Module Kit Mifare RC522 Reader Module with S50 White Card and Key Ring Compatible with Arduino Raspberry Pi

  • The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chip.
  • Easy to use, with pin header. The module can be directly loaded into the various reader molds..
  • Applicable for the user who need to design or manufacture the RF card terminal..
  • Module Interface: SPI， Data transfer rate: Maximum 10Mbit/s..
  • Power Voltage : 3.3V,Operating frequency: 13.56MHz..
Check Stock

Blue Sea Systems 5026 ST Blade Fuse Block 12 Circuit with Ground and Cover

  • Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits.
  • Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer.
  • Positive distribution bus with #10-32 stud.
  • Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open.
  • Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels.
Check Stock

Square D - PK4GTACP 4 Terminal Ground Bar Kit, Silver

  • High Quality Material -- The 4 position terminal bus bar is made of brass, polycarbonate shell, durable, with high strength, high hardness, wear resistance..
  • Easy to Use -- Without protective cover, the 4 terminal bus bar can be used directly, easy to wire, convenient and fast..
  • Product Dimension -- Total Size: 71 x 15 x 21mm / 2.79" x 0.6" x 0.83".
  • Widely Usage -- The terminal block widely used in distribution boxes, distribution cabinets, other high pressure equipment and electrical equipment factories. Also can be used for trucks, cars, yachts, ship wiring, etc..
  • Satisfactory After-Sales Service -- Uenhoy is devoted to providing high quality service. Please feel free to contact us if the item has any quality problem. Your satisfaction is our biggest power..
Check Stock

HID OMNIKEY 3121 R31210320-01 Smart Card Reader - USB 3 0 - Gray

  • With standing base for convenient vertical use.
  • USB Smart Card Reader for CAC Army Military DOD Government ID, National eID, ActivClient, AKO, OWA, DKO, JKO, NKO, BOL, GKO, Marinenet, AF Portal,....
  • ISO 7816 Standard, EMVCo Terminal Level 1.
  • All major operating systems supported: Windows 7, 8, 10, Linux OS, Apple macOS X.
Check Stock

Fastronix 12 Terminal Power Distribution Block Kit

  • Rated to 240 Amps with a 1/4-20 Input Stud on a Nickel-Plated Bus Bar with 12 #8-32 Stainless Steel Terminal Screws.
  • 3/16" Mounting Holes on Each Side of Terminal Block.
  • Includes 12 Premium Double Crimp Nylon Insulated Ring Terminals.
  • Includes Hard Protective Cover (Red) and Flexible Stud Terminal Boot (Red).
  • Use with Fastronix Relay Panel (#900-004) and LED Fuse Panel (#500-043) for Professional, Protected Circuits.
Check Stock

BUD Industries BB-32623 Plate Mounted Breadboard-6 Terminal Strip 11\ L x 8.8\ W x 0.3\ H, Gray

  • ...n convert the data between CAN-Bus and Modbus. With this converter, equipment that used Modbus protocol can connect to CAN-Bus without changing the hardware structure, this makes multi-Bus interconnection very flexible, and extends the application scope of CAN-Bus..
  • CAN Features ? Integrated 1 CAN-Bus interface with terminal ? CAN-Bus signals : CAN_H, CAN_L, CAN_GND ? CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS11898 standards ? CAN-Bus baud rates range from 5Kbps to 1Mbps ? CAN-Bus isolation converter insulation voltage: DC 1500V.
  • Modbus Features ? Modbus slave support function code: 03H, 04H, 06H, 16H ? Support Modbus RTU or TCP ? Support heartbeat and timeout interrupt function ? The working port is fixed, the node address can be set.
  • Hardware Features ? High-speed 32-bit processor ? Embedded hardware watchdog timer ? Power supply voltage: DC 24V ? Maximum current: 40mA ? Electrostatic discharge immunity level: contact discharge ± 2KV, air discharge ±15KV ? Surge immunity level: ± 1KV ? Operating temperature range: -40 ? ~ +85 ? ? Operating humidity range: 5% to 95% RH ? Electrical fast transient burst immunity level: ± 1KV.
  • Working mode Trace mode When Modbus master writes corresponding address data of Modbus with a 06 in....
Check Stock

PCIe Splitter 1 to 4 Multiplier Riser Card, PCI Express X1 Expansion Risers Card, PCIE USB 3.0 Ports Adapter Card for Ethereum Bitcoin ETH GPU Mining Miner Rig

  • ✨ 【Excellent Extendability】 Our PCIe expansion riser card is mainly to solve the problem of less interface on the motherboard, 1 port can be extended to 4. The bus interface is PCI-E X 1 that compatible with X4, X8, X16 interface graphics card ..
  • ✨【Higher Stability】 ---Driver-free Design. The PCIe1 to 4 Multiplier Risers card's main control board adopts the direct power supply mode of the PCI Express interface, no more need the external power. (The motherboard must be powered off before installation).
  • ✨【Advanced Heat Dissipation 】 Motherboard IC which based on high-quality ASM1184 chipset to solve the heat dissipation problem. With aluminum alloy heat sink can effectively dissipate excess heat. Provide the stability and durability of riser card..
  • ✨ 【Port Quantity 】 The Pcie splitter 1 to 4 can make sure multiple lines work at the same time. Easy to install. (Note: This pcie splitter 1 to 4 pci riser card cannot be connected to USB devices, since the 4 USB ports transfer PCI-E signals, not USB signals.).
  • ✨【Warranty】--30-day money-back guarantee service for new product. If you have any questions about pcie splitter risers card, please feel free to contact us, we will definitely solve your problem within 12 hours..
Check Stock

12 Terminal Power Distribution Block Bus Bar - Made in USA (Original Cover)

  • INCLUDES BOTH RED AND BLACK: With this 2 pack of 12 point bus bars, you will have plenty of connection points for both positive and negative wiring terminals..
  • IDEAL FOR AUTO AND MARINE WIRING: Wire up to a dozen accessories with this 2 pack of bus bars. Each bus bar includes a cover and a terminal boot to insulate and protect connections for damage and corrosion..
  • MADE IN THE USA: You can be sure you're getting high quality parts that are made right here in the USA. We are USA based, firefighter owned, and we stand behind our products..
  • ORGANIZING MADE SIMPLE: With these bus bars you can finally organize your wiring so it doesn't look like a rats nest under the hood any more..
  • 100% SATISFACTION GUARANTEED: If you have any issues with your order, contact us and we will make it right..
Check Stock

Fastronix 12 Terminal Power and Ground Distribution Block Kit

  • Everything You Need to Clean Up Your Wiring.
  • 1/4-20 Input Stud on a Nickel Plated Bus Bar with #8 Stainless Steel Terminal Screws.
  • 24 Premium 16-14 Gauge Nylon Crimp Ring Terminals and 2 Premium 12-10 Gauge Nylon Crimp Input Ring Terminals.
  • 3/16" Mounting Holes on Each Side of Terminal Block.
  • High Quality Flexible Boots to Improve Looks and Prevent Shorts.
Check Stock

Blue Sea Systems ST-Blade Water-Resistant 4 Circuit Fuse Block, 5056

  • Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x #8-32 Screws with captive star lock washer, Stud terminal: 1 x #10-32.
  • Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools.
  • Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers.
  • Includes 3 wire plugs to maintain water resistant rating if less than 4 loads are required and 4 write-on circuit labels.
  • Nests with other ST-Blade Water-Resistant Fuse Blocks and Water-Resistant 100A Bus Bars to reduce wire.
  • Fuses and circuit breakers sold separately. Storeage for spare fuse and fastener in cover.
  • Not ABYC compliant, not intended for marine applications, use PN 5056100 for marine use.
Check Stock

NewPath Learning 7 Piece Science Readiness Flip Chart Set, Early Childhood

  • ...le size: this pack includes 45 Pieces Colorful School Bus Cut-Outs，the size of each School Bus Cut-Outs measures approximately 15.6x9.8cm（6.1X3.8 Inch）.
  • These Colorful School Bus Name Tags with plenty of writing room, can be applied as Bulletin Board Decorations，desk or storage box tags, as invitations, postcards, or other cards, for craft projects, games, and more.
  • Durable Material: the creative School Bus cutouts are made of sturdy card material, printed on durable card stock, these versatile, ready-to-use cut-outs are die-cut and reusable if laminated, good for sorting activities, patterning activities, game pieces, labels, and etc..
  • Applicable occasions: School Bus Accents Paper Cutouts can be applied for decoration of classrooms, bulletin boards, rooms, etc., and also for classroom and School Bus party,School Bus Accents Paper Cutouts assorted cut-outs are an easy way to add flair to any school，family and School Bus themed party,these School Bus Cut-outs are ideal for just about anything.
  • Chic design: School Bus Name Labels,designed with a variety of styles , there are 5 different styles of School Bus paper cutouts, with strong autumn Back To School Party theme elements, assorted styles make them good for classroom bulletin boards, doors,....
Check Stock

6 Terminal Bus Bar - 150A BusBar Block with Cover, Ground Distribution, Power Distribution Terminal Block w/ 6 M4 Screws + 2 Studs, for Car Boat Marine Caravan RV (New)

  • HIGH QUALITY – ni-plated copper bus contact plate for low resistance ,maximum conductivity and protect against corrosion..
  • MAIN PARAMETER – Continuous Ratin:130A AC/150A DC.
  • WIDE USE – JOYHO busbar gives a neat and clean finish to any installation in your Car Boat Marine caravan RV..
  • PROTECT COVER – Cover are Manufactured From PC, Base are Made of Nylon, for Excellent Strength and Durability in Even the Harshest of Environments..
  • BUY WITH CONFIDENCE – Every bus bar is backed by an industry leading 12-month warranty. If you are not 100% satisfied with your purchase, simply take advantage of the No Questions Asked, 30-Day Money Back Guarantee..
Check Stock