Reviews Bus Bar Support

BUD Industries BB-32623 Plate Mounted Breadboard-6 Terminal Strip 11\ L x 8.8\ W x 0.3\ H, Gray

  • ...erter, equipment that used Modbus protocol can connect to CAN-Bus without changing the hardware structure, this makes multi-Bus interconnection very flexible, and extends the application scope of CAN-Bus..
  • CAN Features ? Integrated 1 CAN-Bus interface with terminal ? CAN-Bus signals : CAN_H, CAN_L, CAN_GND ? CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS11898 standards ? CAN-Bus baud rates range from 5Kbps to 1Mbps ? CAN-Bus isolation converter insulation voltage: DC 1500V.
  • Modbus Features ? Modbus slave support function code: 03H, 04H, 06H, 16H ? Support Modbus RTU or TCP ? Support heartbeat and timeout interrupt function ? The working port is fixed, the node address can be set.
  • Hardware Features ? High-speed 32-bit processor ? Embedded hardware watchdog timer ? Power supply voltage: DC 24V ? Maximum current: 40mA ? Electrostatic discharge immunity level: contact discharge ± 2KV, air discharge ±15KV ? Surge immunity level: ± 1KV ? Operating temperature range: -40 ? ~ +85 ? ? Operating humidity range: 5% to 95% RH ? Electrical fast transient burst immunity level: ± 1KV.
  • Working mode Trace mode When Modbus master writes corresponding address data of Modbus with a 06 instruction.If the data changes,it will trigger the correspondi....
Check Stock

Heart Horse Bus Bar Terminal Block 1/4 Power Stud Battery Junction Block Post Distribution Block Insulated with Cover DC 48V 150A for Auto Truck RV Boat 1/4 ,Red+Black

  • WORKING RATING - Power stud size: 1/4".Maximum working voltage is DC 48V & up to 150 Amps.The battery bus bar is measured 1.77" x 1.69" x 1.4"..
  • EASY TO USE - Each bus bar with a cover can prevent short circuits and is completely safe.The cable can be installed with a wrench without removing the cover..
  • DURABLE & DEPENDABLE - The bus bar has good electrical conductivity and corrosion protection for durability.Terminal block's material is stainless steel, insulated base..
  • EFFICIENTLY DISTRIBUTE POWER - With these power distribution block, you can organize your wiring cleanly and keep your environment clean and tidy..
  • APPLICABILITY - Battery junction block is widely used in motorcycles, cars, trucks, RVs, etc..
Check Stock

Agastat TE Connectivity 7022AC Time Delay Relay 120VAC Off-Delay 1.5 - 15 Seconds

  • Double way USBCAN II Debugger with 2 Road CAN interface, PC can be connected to a standard CAN network through the USB bus, the construction of Field bus testing laboratory, industrial control, intelligent building, data processing, automotive electronic.Support VC++, C#, VB, Labview and other two development interface functions..
  • Double way USBCAN II The debugger equipment, CAN bus circuit adopts DCDC power module, industrial grade magnetic coupling isolation chip CAN bus isolation, the interface adapter has a strong anti-jamming capability, greatly improve the reliability.Systems support for WIN98, for WIN200, for XP, for WIN7, for WIN8, for WIN10..
  • Double way USBCANII The debugger can use the USBCAN tools provided by our shop, directly to the CAN bus configuration, send and receive. Users can also refer to the store to provide the DLL dynamic link library, routines to write their own applications. Intuitive, fast hardware filter settings.Added USB protection, CAN bus protection circuit..
  • Double way USBCAN II debugger can be used as a standard CAN bus, CAN bus is CAN bus equipment product development, testing, a powerful tool for data analysis.
  • at the same time, the USBCAN debugger has the characteristics of small volume, convenient insta.
Check Stock

NESGLODUO Copper Flat Bar - Copper Bar Stock, Copper 110 Flat Bar, 0.24in x 1in x 12in

  • 【Size】It is a solid bar of copper: 12''L x 1''W, 0.24'' thickness and weight is 14.11 ounces, no more no less, good size for the electrical project you're looking for..
  • 【Material】Copper flat bar is made of copper, grade as C-110. It's thick enough and conducts heat well, so burn through is mitigated, if you need something to soak up heat this works well..
  • 【Features】Easy to cut and drill, and work great for your intended use. My uncle easily fabd a bus bar system for his new X-S-3400s, good investment compared to custom machined pieces that are 3-4x the cost..
  • 【Copper 110 Flat Bar】It would carry current with no issues and work well for your project such as make a bud bar for electrical project, or bus bar for battery connections..
  • 【Application】Copper flat stock is suitable for various milling, craft, lathe, knife project, battery terminal L brackets, home solar battery bank, or others electrical engineering..
Check Stock

Victron Energy Lynx Power in Battery Connector

  • The lynx power in module is used to connect batteries via an external fuse, It can be useful if you have multiple parallel strings.
  • The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables.
  • It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.
  • A modular DC bus bar, the Victron Lynx Power In is used to connect batteries to the Lynx DC distribution system.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

Bopaodao Copper Bus Bar 3mm x 25mm x 5.91 inch / 150mm, 1Pcs C110 Pure Cu Copper Flat Buss Bar Stock

  • 1Pcs c110 copper flat bus bar, 3mm x 25mm x 5.91 inch / 150mm, about T 1/8" x W 1".
  • Copper flat bars are widely used for electrical applications for the high electrical and thermal conductivity. Due to its exceptional strength, ductility and corrosion resistance, copper flat bar is also typically used in architectural applications. Uses of copper flat bar include automotive, construction, machined components, roofing, industrial, electrical, fabrication, engineering, manufacturing, marine equipment, architecture industries.
  • As a factory seller, we would like to accept any customization about the copper bar, including the length, drilling and bending or any other special needs, please contact us.
  • The copper bar is made of 0.999 copper, which is the C110 Cu, we also provide tinned copper bar and Nickel-plated copper bar.
  • Copper bars are also called copper bus bars or copper buss bars. They are made of copper and have rectangular or chamfered (rounded) rectangular cross-sections. (Nowadays, rounded copper bars are generally used to avoid tip discharge). The circuit plays the role of conveying current and connecting electrical equipment. Sometimes it can also be made as crafts or decorations.
Check Stock

8 Terminal Bus Bar Terminal Block 10 Pack Brass Wire Screw Terminal for Car Boat Marine Ground Power Distribution Terminal Block

  • Brass terminal grounding strip bus bar block with 8 screws & 2 Stud.
  • High quality plastics base ensures great mechanical strength and durability.
  • Use M4 screws to fix it in place through the two screw holes on both ends of the terminal.
  • Widely used in power distribution cabinets, distribution boxes,mechanical equipment factories,electrical equipment factories,etc.
Check Stock

12 Terminal Power Distribution Block Bus Bar - Made in USA (Original Cover)

  • INCLUDES BOTH RED AND BLACK: With this 2 pack of 12 point bus bars, you will have plenty of connection points for both positive and negative wiring terminals..
  • IDEAL FOR AUTO AND MARINE WIRING: Wire up to a dozen accessories with this 2 pack of bus bars. Each bus bar includes a cover and a terminal boot to insulate and protect connections for damage and corrosion..
  • MADE IN THE USA: You can be sure you're getting high quality parts that are made right here in the USA. We are USA based, firefighter owned, and we stand behind our products..
  • ORGANIZING MADE SIMPLE: With these bus bars you can finally organize your wiring so it doesn't look like a rats nest under the hood any more..
  • 100% SATISFACTION GUARANTEED: If you have any issues with your order, contact us and we will make it right..
Check Stock

Dell Optiplex GX280 SDT Motherboard - G8310

  • This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com.
  • Genuine Dell motherboard model XF954 for OptiPlex GX280 Tower Cases.
  • Intel 915 Express ChipSet, Socket LGA775 Supporting Pentium 4, Celeron, Prescott Processors up to 3.2ghz, Hyper-Threading Technology Support , 533/800 MHz system bus.
  • 4 Dual Channel DIMM Support for DDR2-400/533, 4 GB MAX system memory , 1 16x PCI-Express Video Slot , Integrated Intel 900 Graphics Accelerator , Integrated 10/100/1000 Lan , Integrated ADI Sound ,.
  • 2 Serial ATA Hard Disk Connectors, One ATA-66/100/133 IDE Hard Disk Connector , One Floppy Connector.
Check Stock

Recoil S2P-516 Busbar Dual 5/16” Studs and #8 Screw Terminal Power Distribution Block with Ring Terminals Pair Red & Black

  • Product features: brass plate and stainless steel terminals as conductors have low resistance, conductivity and corrosion resistance..
  • Parameters: maximum voltage: 300 V AC, 48 V DC, maximum continuous current: 130 A AC, 150 A DC..
  • Scope of application: suitable for automobiles, trucks, ships, boats, yachts, etc..
  • Material: The base is made of hard plastic, durable, and the protective cover is made of PC to prevent accidental electrical short circuit..
  • Package: A red battery bus bar and a black battery bus bar..
Check Stock

Square D - PK4GTACP 4 Terminal Ground Bar Kit, Silver

  • High Quality Material -- The 4 position terminal bus bar is made of brass, polycarbonate shell, durable, with high strength, high hardness, wear resistance..
  • Easy to Use -- Without protective cover, the 4 terminal bus bar can be used directly, easy to wire, convenient and fast..
  • Product Dimension -- Total Size: 71 x 15 x 21mm / 2.79" x 0.6" x 0.83".
  • Widely Usage -- The terminal block widely used in distribution boxes, distribution cabinets, other high pressure equipment and electrical equipment factories. Also can be used for trucks, cars, yachts, ship wiring, etc..
  • Satisfactory After-Sales Service -- Uenhoy is devoted to providing high quality service. Please feel free to contact us if the item has any quality problem. Your satisfaction is our biggest power..
Check Stock

DELL OPTIPLEX GX280 Motherboard 0Y6281 0H8164 0H5354

  • This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com.
  • Genuine Dell motherboard model XF954 for OptiPlex GX280 Tower Cases.
  • Intel 915 Express ChipSet, Socket LGA775 Supporting Pentium 4, Celeron, Prescott Processors up to 3.2ghz, Hyper-Threading Technology Support , 533/800 MHz system bus.
  • 4 Dual Channel DIMM Support for DDR2-400/533, 4 GB MAX system memory , 1 16x PCI-Express Video Slot , Integrated Intel 900 Graphics Accelerator , Integrated 10/100/1000 Lan , Integrated ADI Sound ,.
  • 2 Serial ATA Hard Disk Connectors, One ATA-66/100/133 IDE Hard Disk Connector , One Floppy Connector.
Check Stock

New Genuine Dell Optiplex Gx280 Sff Power Supply U5427 Ps-5161-7ds

  • This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com.
  • Genuine Dell motherboard model XF954 for OptiPlex GX280 Tower Cases.
  • Intel 915 Express ChipSet, Socket LGA775 Supporting Pentium 4, Celeron, Prescott Processors up to 3.2ghz, Hyper-Threading Technology Support , 533/800 MHz system bus.
  • 4 Dual Channel DIMM Support for DDR2-400/533, 4 GB MAX system memory , 1 16x PCI-Express Video Slot , Integrated Intel 900 Graphics Accelerator , Integrated 10/100/1000 Lan , Integrated ADI Sound ,.
  • 2 Serial ATA Hard Disk Connectors, One ATA-66/100/133 IDE Hard Disk Connector , One Floppy Connector.
Check Stock