Reviews Bumper Weld Auto Plastics

J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml Pack Of 3

  • J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water.
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White.
  • Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
  • Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
  • Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC....
Check Stock

J-B Weld 50176 KwikWeld Steel Reinforced Epoxy Syringe - Dark Grey - 25 ml,Black

  • J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B....
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld....
  • Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of....
  • Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water....
  • Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC.
Check Stock

Wrdlosy Plastic Welder, 800PCS Staples, Plastic Welding Kit, Must Have For DIYers, Instant On/Off, Plastic Welder Kit, Bumper Repair Kit Plastic Repair Kit, Portable Toolbox, Hot Stapler

  • ✔ 【Multipurpose Fit】 - Our Plastic Welder suitable for repairing and reinforcing plastics parts of all automobiles, such as bumpers, dashboards, lamp holders, plastics rings, and daily plastics supplies. Save you much money!.
  • ✔ 【An Ideal DIY Tool】 - Stainless steel staple will not rust, Wavy staple design for maximum load. The ideal way for repairing most modern products which are made of plastics. Hot Stapler, Strong for shock and twi-st after repairing soldering..
  • ✔ 【Quick Operation】 - Plastic Welding Kit choose right staple, insert into the brass holder, press power button, wait a few seconds, and let staple melt into plastic parts slowly, in case staple cross through the plastic board..
  • ✔ 【More Comfortable】 - Plastic Weld Ergonomic designed to fit into the palms of your hand. Design with light,make you see the cracked part of the bumper clearly. our worry-free 5-Year warranty, and friendly customer service. if you have any problems during usage, please contact us, our service team will be available any time..
  • ✔ 【Portable Welder】 - Plastic repair We....
Check Stock

OIMERRY Plastic Welder Kit with 800pcs Hot Staples 5-Level Adjustable Power 110V Hot Stapler Bumper Plastic Repair Welding Kit

  • Save your time and improve the weld experience when using this 30W Hot Stapler Plastic Welding Kit with 5 adjustable heat levels to weld the cracked and damaged plastic parts..
  • This plastic stapler gun with LED indicator will let you quick and easy to repair the broken and damaged plastics of automobiles, motorcycles, ATVs, boats and industrial applications..
  • Bumper Welding Kit heats special staples, and perfectly welds staples and plastic together while still remaining flexibility of plastic..
  • 1x Hot stapler unit, 1x Cutter, 1x Triangle electrode, 1x Power line, and 800pcs staples all included in one suitcase, easy to use and carry..
  • The hot stapler have acquired the CE and FCC Certifications. Our worry-free 12-month warranty and friendly customer service..
Check Stock

J-B Weld ClearWeld 5 Minute Epoxy, Clear, Syringe, 2 Pack, 50112-2

  • J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear..
  • Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI..
  • Surface Applications: Metal, Most Plastics, PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass..
  • Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld 50112 ClearWeld 5 Minute Set Epoxy Syringe - Clear - 25 ml

  • J-B Weld Clearweld: A Clear, Quick Setting And Multipurpose Two Part Epoxy That Provides A Strong And Lasting Bond On Surfaces Including Metal, Tile, Most Plastics, Ceramic, Glass, Wood And More. J-B Weld Clearweld Comes In A Syringe Allowing For An Easy 1:1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
  • Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Clearweld Takes 5 Minutes To Set And 1 Hour To Cure. J-B Weld Clearweld Set And Cure Color Is Clear.
  • Strength: J-B Weld Clearweld Has Tensile Strength Of 3900 Psi.
  • Surface Applications: Metal, Most Plastics, Pvc, Wood, Concrete, Ceramic & Tile, Fiberglass And Glass.
Check Stock

J-B Weld Pro Size ClearWeld 5 Minute Set Epoxy

  • J-B WELD CLEARWELD PRO SIZE: Same formula as the J-B Weld ClearWeld, just in two 4oz tubes! ClearWeld is a clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more!.
  • CURE AND SET TIME: After mixing at a ratio of 1:1, it takes 5 minutes to set and 1 hour to cure. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil..
  • STRENGTH: J-B Weld ClearWeld has tensile strength of 3900 PSI..
  • SURFACE APPLICATIONS: Glass, ceramic, tile, plastics, concrete, wood, metal and more..
Check Stock

Woodzdon 50 Pcs 1/4 Hole Nylon Blind Rivet Fender Flare Bumper Cover Door Trim Retainer for Jeep Wrangler Liberty for GM 10184895 for Chrysler 6506007-AA for Ford N803862-S Plastic Expansion Clip

  • ...astener, Fender Fastener, Plastic Fastener, Flare Rivet, Applique Rivet, Support Rod Rivet, Rocker Molding Rivet, Auto Body Retainer, Trim Moulding Clip, Plastic Clip, Auto Body Rivet, Trim Clip, Car Clip, Automotive Clip, Auto Fastener.
  • Placement: Molded-In-Color Fender Flares, Daytime Running Lamp System, Exterior Plastics Module, Body Color Fender Flares, Front Fascias Parts Module, Black Grille, Fascia to Flare, Fascia to Support Bracket, Flare to Body Side, Flare to Fascia, Front Flare Attaching, Front Flare To Body, Front Liner to Flare, Liner Attach, Rear Flare Attaching, Rear Flare To Liner, Sill to Body Side, Splash Guard to Flare, With Australia Eqiupment Group, Australia Equipment Group, Hood, Air Ducts, Body Moldings.
Check Stock

106pcs Plastic Welding Rods ABS PP PU PE PA PC TPO 7 Types of Plastic Welder Rods for Car Bumper Kayak Repair Kit with Reinforcing Stainless Steel Mesh Plastic Welding Kit Welding Supplies

  • PLASTIC WELDING KIT WITH RODS: 106 pieces 12-color plastic welding rods. Includes 7 of the most commonly used plastics-(PP)polypropylene, (PU)polyurethane, (PE)polyethylene, (PC)polycarbonate, (PA)polyamide/nylon, ABS, TPO. Round welding rods are available in 7pcs colors, 8pcs for each color. Flat welding rods are available in 5 colors, 10pcs of each color. The round welding rods are 13 inches long and 1/8 inch in diameter. Flat welding rods measure 9.8 x 0.2 x 0.1inch..
  • MULTIPLE PLASTIC TYPES: ABS/PP/PU/PE/PA/PC/TPO Various types of plastic repair welding rods that can help you repair car bumpers, kayaks, lawn mowers, plastic Water tanks and more broken plastic parts. Each bundle of plastic welding rods has a corresponding plastic label, which allows you to choose the type of material you need. Please determine the type of plastic you are welding and select the corresponding material, which can better provide a seamless repair for your welding job..
  • WELDING RODS GOOD PERFORMANCE: The plastic welding rod has good toughness and stable moisture-proof insulation, not easy to wear and aging, suitable for repairing damaged plastic parts made of plastic. Use with the plas....
Check Stock

150W Plastic Welder,Plastic Welding Kit with 800pcs Hot Staples,2pcs pp Plastic Welding Rods,knife,Plier, Plastic Welding Machine Plastic Repair Kit for Car Bumper Crack Repair Tools(Red)

  • ✔【Upgraded Multipurpose 150W Plastic Welding Repair Kit】3s Quick Heating Plastic Welder Gun ，save your time effectively.The tool is indispensable for you to repairing most modern products which are made of plastics.such as car bumper, bumper, dashboard, lamp holder, plastic ring, kayaks, headlights and many other plastics. Also perfect for handicraft.Save your money!.
  • ✔【Value Package】Comes with 800PCS hot staples (6 types: 200PCS 0.8mm wave staples, 100PCS 0.8mm flat staples,100PCS 0.6mm flat staples, 100PCS 0.6mm wave staples，150PCS 0.6mm M staples and 150PCS 0.8mm V staples）The rich quantity and various shapes can meet your use and replacement needs..
  • ✔【Easy to Use】 -The plastic welding kit has anti scald protection function,firm welding,easy operation and portability. just press the button to heat and weld the staples into the plastic.The head light illuminates when in use.Comes with different types of welding heads and plastic welding rods, the metal staples will make the broken parts stronger than they were originally..
  • ✔【Professional Plastic Welding Kit】This plastic repair kit contains a ....
Check Stock

J-B Weld ClearWeld 14ml w/Static Mixer, (50114H)

  • J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!.
  • Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear..
  • Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI..
  • Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass..
  • Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Master Appliance ProHeat Series Plastic Welding Kit with Variable Temp Heat Gun & Starter Welding Rods, 1000-Degree Fahrenheit 120V 1300 Watts

  • Get tough work done: The heat gun’s compact, lightweight design enables you to efficiently hot air weld thermoplastics such as rigid and flexible plastics, tarps, liners, covers, tents, inflatables and more.
  • Dial-in control: Use the heat gun’s LCD display and innovative magnetic key to seamlessly set, adjust and lock airflow and temperature between 130F-1000F.
  • Everything you need: Kit includes the PH-1400 Dial-in Electric Heat Gun, a welding rod assortment, and five tips for specific welding applications that use heat and pressure: speed, pendulum, mirror and tack welding.
  • Engineered in the USA: With 1300 watts of power, our heavy-duty heat gun and welding system can meet the challenges of all sorts of environments and applications, including welding flooring materials and plastic bumper repair.
Check Stock

Portasol 11289210 Plastic Welding Kit

  • NO WORRIES. Welding can be carried out next to heat sensitive parts like cables, foams and textiles and no oxidation of parts by hot air..
  • QUALITY. Thin plastics parts and sheets can be welded, no uncontrolled heat transfer which means less wrinkles in parts to be welded..
  • SOLUTION. Problematic plastics that absorb water are easier to weld like ABS, PC and PA plastics..
  • EASY TO USE. Cordless kit for plastic welding and no special training needed..
  • TRANSFER. Heat through contact as opposed to hot air..
Check Stock