Reviews Bumper Vent Covers

Dumble Replacement RV Bumper Cap, RV Sewer Cap, Travel Trailer Bumper End Caps, Square 4 Inch Camper Bumper Cap, 2-Pack

  • STOW AWAY YOUR SEWAGE HOSE: The Dumble RV Supplies Camper Bumper End Cap 2-Pack is an RV square bumper cap that conceals a sewer hose sewage line that is stored in the RV rear bumper.
  • GET PROPER VENTILATION: 1-inch (2.5 cm) square vent hole in the center of this end cap for RV bumper allows for air circulation to properly ventilate the sewage line while in the RV hose storage bumper compartment.
  • BUILT TO LAST: Constructed from automotive-grade thermoplastic for flexible strength and longevity that resists rust and corrosion.
  • Jet black color to match your existing RV sewer hose storage bumper.
  • INSTALL IN SECONDS: Simply pop the RV camper bumper end caps onto your existing bumper sides to fully conceal the sewage hose while still allowing for ventilation.
  • These 4 in bumper cap plugs are a standard size that fits 4-inch square RV bumpers.
  • If the fit is tight, we recommend using lubrication and a rubber mallet to install.
  • PERFECT SIZE: Fits standard square 4-inch RV bumpers.
  • Requires at least 3.8-inch x 3.8-inch (9.7x9.7 cm) opening and 0.75-inch (1.9 cm) depth that goes into bumper.
  • 4-inch x 4-inch x 1.2-inch (10.2x10.2x3 cm) overall dimensions.
  • Ensure that the overall size of the RV bumper sewer cap is correct.
Check Stock

ANTFEES 4 Pack Magnetic Air Vent Cover 8 X 15.5 for Home Floor Wall Ceiling Vents Air Registers RV Home HVAC and AC Vents,Easily Cut to Any Size

  • PACKAGE INCLUDE - 4 pack vent magnet covers in total. One set of double thick magnetic vent covers for home can be used for many vent blocks in the....
  • A PERFECT SIZE - 12" (L) x 5.5" (W) magnetic vent covers for home is designed to match most standard wall registers and fireplace vents. These vent....
  • COMPATIBILITY - Floor vent covers with trace less magnetic strips is compatible with HVAC at home, in the office, on RVs and boats.
  • Double thick magnetic covers for vents sheet magnetically seals the air from passing through metal vents on sidewall or floor and reduces noise.....
  • OCCASION - These white air vent covers are suitable for the floors in your kitchen, bathroom, or living room. You can decorate or paint some beautiful....
Check Stock

Red Hound Auto 2 Bumper Plug End Caps Square 4 Inches Vented Cover RV Camper Trailer Hard Plastic Pair Set

  • 2 Premium RV Trailer Bumper Plug Hard Plastic End Caps.
  • RV/Trailer Bumper Plug End Cap (exact measurement of insert 3-7/8", check inner measurement of your bumper).
  • Fits standard square 4" RV bumpers, conceals sewer hose.
  • Easy, perfect fit with trouble-free installation.
  • Made from heavy duty automotive grade hard plastic.
Check Stock

Triangular Baseboard Floor Register (10' x 6' Duct Opening/~11 3/8' x 6 7/8' Overall)

  • Proper Ventilation - Choose air vent covers with dampers to regulate & change direction of airflow!.
  • Easy To Install - Remove the old cover then use the included screws to attach the vent register..
  • Heavy-Duty Metal Construction - Continental offers air duct covers made from durable steel material!.
  • Powder Coated Finish - Use long-lasting & chip-resistant baseboard vent covers for your home..
  • Carefully Designed - The vent covers for home features 20° slanted fins for unrestricted airflow!.
Check Stock

Kakalote 12V RV Roof Vent Ventilation Ceiling Exhaust Fan Motorhome Caravan Exhaust Cooling Fan 60CFM

  • ➊USE FOR: This RV vent lid replacement is meant to replacement that fit 14"x 14" RV roof ceiling attic dome exhausts vent and comes completely assembled, which is easy to install. We understand that it quite inconvenient to getting on your RV roof. 14 inch RV vent covers keep RV bathroom vent air fresh, insulated rain leaking, and prevent heat entering inside RV. It suits for Camper, Motorhome, Trailer..
  • ➋MATERIAL: RV ceiling vent cover is made from PP plastic (Polypropylene) with UV-resistant - Sun protection that extends the lifespan. RV metal vent covers: Stainless steel metal bracket - service item's life extended..
  • ➌PACKAGE: include 2 pack RV exterior vent covers per box..
  • ➍ACCESSORIES INCLUDED: 12 pcs screws and 12 pcs nuts, 1pcs mini wrench,1 pcs mini screwdriver and 1 assembly manual..
  • ➎!!!ATTENTION:There may be sharp edges on hinge, please be careful when installing. Do not open the RV vent cover when driving. Please reference the images of the listing to make sure your vent is compatible with this replacement..
Check Stock

munirater 2-Pack Front Bumper Fog Light Cover Grilles Replacement for 2001-2006 BMW E46 M3 Left and Right Side

  • This product replacement for 2001-2006 BMW E46 M3 air duct dual vent fog light covers (Not replacement for 3-Series models with M-Tech bumper).
  • It is an easy modification to dress the front end up abit.
  • Package Includes: 1 x right fog light cover and 1 x left fog light cover.
Check Stock

SEAL360 Square Magnetic Vent Cover 1 Piece Pockets for Complete Seal 12 X 12 White for Floor Wall or Ceiling Air Vents and Registers Vent Not Included

  • Strongest Magnets – Our Anisotropic Magnetic Vent Covers provide the strongest magnetization and seal to your register grilles, vents or diffusers....
  • Thickest Vent Covers - Our Magnetic Vent Covers are optimal at 1.5mm of thickness to ensure a proper seal while being light and .1 mm of PVC coating....
  • SAVE MONEY – Save money on your bills today by using our strong magnetic vent covers to seal air and prevent any heating or cooling to go to waste....
  • Cut into any Shape & Size – With an original dimension of 5.5 X 12 inch, you can cut or trim your vent cover to more precisely fit your air vent..
  • 100% Satisfaction Guaranteed – Don’t worry you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart now and enjoy a....
Check Stock

Empire Barrel Blocker Condom Cover Sleeve Sock Protector Black

  • STEEL DAMPER ATTACHED - These vent covers for home floor have sturdy steel construction, powder-coated steel damper attached for durability, longevity, are smooth, shiny, and have no sharp edges. These air vents are crafted for long trouble free operation, rigid extra heavy duty to withstand constant walk on situations.
  • EXCELLENT AIR FLOW - The metal dampers in these air vent covers provide easy unrestricted air flow as compared to the ones with fragile plastic dampers. The metal lever of these heat register covers have sufficient resistance to keep the fins in position allowing you to direct the air flow as required.
  • EASY INSTALLATION - Simply remove the old register vent cover and place the new one in the standard duct opening. To determine size needed, measure air duct opening rather than old register. These vents are not suitable for ceiling or wall applications. No screws or tools are required to install these floor register covers.
  • QUALITY PACKAGING - The air register covers are very carefully first shrink wrapped, then bubble packed, and finally backed with cardboard to prevent any damage during transit.
  • HIGH QUALITY FINISHING - These modern floor vents are crafted from 2mm thick steel, have very high quality lacquer coating to prevent any chippin....
Check Stock

14' Universal RV Trailer Camper Motorhome RV Vent Covers for roof - Vent Lid Replacement (White 2 Pack) Compatible With rv accessories Ventline, Jensen and Elixir RV Vent Covers

  • The New Replacement Weather Resistant 14x14 RV Roof Vent Cover is compatible with most popular camper vents. Compatible with Ventline roof vents prior to 2008 and Elixir roof vents starting 1994. Make sure you look at the images in the listing to make sure your RV vent is compatible with this replacement..
  • Our Highly Durable rv vent covers for roof 14x14 Replace your RV vent covers that are cracked stained and brittle with these high quality impact resistant plastic brand new ones.
  • Easy to Install No Special Tools No Drilling Required to install these 14x14 camper vent cover.
  • This trailer vent cover rv vent covers for roof is meant to fit 14"x 14" RV roof ceiling attic dome exhausts vent and comes completely assembled, which is easy to install..
  • We understand that it quite inconvenient to getting on your camper roof. But replacing a damaged one is necessary. Our 14 inch RV roof vent cover replacement will keep your RV bathroom vent air fresh, insulated rain leaking, and prevent heat entering inside RV. It fits Camper, Motorhome, Trailer..
Check Stock

ONLTCO Rv Roof Vent Cover Replacement 14 x 14, White Vent Lid for Camper Trailer Motorhome Bathroom, 2 Pack

  • USE FOR: This RV vent cover is meant to replacement that fit 14"x 14" RV roof ceiling attic dome exhausts vent and comes completely assembled, which is easy to install. We understand that it’s quite inconvenient to getting on your RV roof. 14 inch RV vent covers keep RV bathroom vent air fresh, insulated rain leaking, and prevent heat entering inside RV. It suits for Camper, Motorhome, Trailer..
  • MATERIAL: RV ceiling vent cover is made from PP plastic (Polypropylene) with UV-resistant - Sun protection that extends the lifespan. RV metal vent covers: Steel metal bracket - Add rust-proof to protect the surface of the steel from corrosion, its service item's life extended..
  • PACKAGE: include 2 pack RV exterior vent covers per box..
  • !!!ATTENTION: Do not open the RV vent cover when driving. Please reference the images of the listing to make sure your vent is compatible with this replacement..
  • ღღღWARRANTY: ONLTCO always insists customer first and offers one year FREE replacement warranty. The following conditions occur and are not a condition of warranty: 1. Malfunctions and damage caused by incorrect use and improper repairs.
  • 2. Failure or damage caused by shipping, moving, or falling after purchase.
  • 3. Other unavoidable external factors cause malf....
Check Stock

FAMCO Copper Hooded Wall Vent With Damper, Dryer Vent Outlet Used For Air Exhaust Applications

  • MADE IN THE USA: Our hooded copper wall vent covers for home are constructed using quality, heavy duty 16 ounce, 24 gauge copper, with the most extreme conditions in mind. The FAMCO hooded wall vent includes a built-in hinged backdraft damper..
  • ADAPTIVE DRYER VENT: The FAMCO DWV Wall Vent is primarily used for dryer venting and air exhaust applications that require no screen. The angled hood is designed to balance a low profile with optimum air and exhaust flow..
  • SELECtION: Our vent covers for home is available in sizes ranging from 3” to 14 inches. NOTE THE SIZE REFERS TO THE DIAMETER OF THE PIPE. Our low profile vent covers are also available in Aluminum, Galvanized Steel or Galvanized painted steel in black, brown, or white..
  • INSTALL: Our air vents are made from durable materials making it easier to install and compatible with most home improvement projects. Please note this dryer vent has NO SCREEN. Please see our SDWV Wall Vents for a vent with a screen and damper..
  • SATISFACTION: FAMCO prides itself on Quality Built Products manufactured from quality raw materials. All....
Check Stock

DIYMAG Strong Magnetic Floor Vent Covers for Standard Air Registers, 5.5 inch X 12 inch, 8Pack for Floor, Wall and Ceiling Registers, Home and RV, HVAC.

  • ✅CRAZY STRONG: What’s the point having a magnetic vent cover if it falls off every two seconds? Whether its weak magnets or rigid contours, or whether you have painted vents - some covers just don’t want to stick around. But Muscle MagVent Vent Blockers bring the Magnetic Muscle on all ceiling, wall, and floor vents..
  • ✅WHAT’S IN THE PACK? This is a set of 3 magnetic vent covers for ceiling vents, walls and floors. Each AC Vent Cover Sheet is 5.5 x 12” and can be easily cut to fit your vent. No need to fuss with pre-sized covers that may not even fit, because Muscle MagVent adapts to MANY vents!.
  • ✅WHY MORE MAGNETIC? Muscle MagVent Register Covers have more magnetism per square inch! We use a higher percentage of Ferrite in our rubber making, and then we make each sheet 2mm thick! Higher magnetic percentage and a thicker sheet means optimized stickability to any of your vents..
  • ✅GOT PAINTED VENTS? Many magnetic register vent covers don’t stick to paint. But Muscle MagVent sticks like a dream! So you can control air flow, direct specific heating or cooling to where you want, make use of unused rooms....
Check Stock

Empire Register Co, Vent Cover - 4x10 inch, Honeycomb Design, Brushed Nickel Finish, Heavy Duty Floor Vent Covers, Metal Damper Attached. Vent Covers for Home Floor only.

  • STEEL DAMPER ATTACHED - These vent covers for home floor have sturdy steel construction, powder-coated steel damper attached for durability, longevity, are smooth, shiny, and have no sharp edges. These air vents are crafted for long trouble free operation, rigid extra heavy duty to withstand constant walk on situations.
  • EXCELLENT AIR FLOW - The metal dampers in these air vent covers provide easy unrestricted air flow as compared to the ones with fragile plastic dampers. The metal lever of these heat register covers have sufficient resistance to keep the fins in position allowing you to direct the air flow as required.
  • EASY INSTALLATION - Simply remove the old register vent cover and place the new one in the standard duct opening. To determine size needed, measure air duct opening rather than old register. These vents are not suitable for ceiling or wall applications. No screws or tools are required to install these floor register covers.
  • QUALITY PACKAGING - The air register covers are very carefully first shrink wrapped, then bubble packed, and finally backed with cardboard to prevent any damage during transit.
  • HIGH QUALITY FINISHING - These modern floor vents are crafted from 2mm thick steel, have very high quality lacquer coating to prevent any chippin....
Check Stock