Reviews Bumper Retaining Bracket

Rexka 20pcs 10mm Hole Bumper Engine Cover Fender & Grille Clips Compatible with Subaru 909140007 Baja Forester Impreza Legacy Outback Tribeca 2011-2000

  • Other Names:Under Cover Clip, Grille Clip, Fender Liner Clip, Splash Shield Clip, Fender Liner Retainer Clip, Lower Cover Clip, Sight Shield Clip, Cover Clip, Reinforced Beam Clip, Side Cover Clip, Bumper Cover Retainer Clip, Lower Bracket Retainer Clip, Fender Liner Retainer, Suspension Cross-Member Clip, Wheelhouse Liner Retainer, Grille Assembly Clip, Plate Clip, Pad Clip, Bumper Cover Fastener, Reinforcement Fastener, Guide Clip, Side Retainer Rivet, Upper Quarter Trim Fastener..
  • Upper Seal Clip, Corner Support Clip, Protector Clip, Under Cover Retainer Clip, Upper Bracket Clip, Grille Bracket Clip, Lower Bracket Clip, Retainer Plate Clip, Upper Plate Clip, Bracket Clip, Fog Lamp Assembly Clip, Side Bracket Retainer Clip, Upper Cover Retainer Clip, Cover Plate Clip, Hole Cover Clip, Pillar Trim Clip, Closure Panel Clip, Spoiler Clip, Protect Shield Clip, Backup Lamp Clip, Duct Clip, Outer Cover Clip, Bumper Cover Retainer, Bumper Cover Side Bracket.
  • Replaces Subaru: 90914-0007 Fits: Subaru: Ascent, B9 Tribeca, Baja, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, WRX, WRX STI, XV Crosstrek.
  • Head Diameter: 21mm Stem Length: 15mm Fits Into 10mm Hole.
  • This is the most common Clip for Subaru cars. Commonly Used in Front Bumper, Front Grille,....
Check Stock

Bumper Bracket compatible with Chevrolet Avalanche 1500 02-06 Silverado P/U 03-07 Front Right and Left Side Outer Brace

  • Direct Replacement Bumper Bracket Compatible with 2002-2006 Chevrolet Avalanche 1500 / 2500.
  • Direct Replacement Bumper Bracket Compatible with 2003-2006 Chevrolet Silverado 1500 & GMC Sierra.
  • Direct Replacement Bumper Bracket Compatible with 2007 Chevrolet Silverado & GMC Sierra 1500 Classic.
  • Replaces OE Number 15184116, 15184117 & Replaces Partslink Number GM1066159, GM1067159.
  • A high quality, Direct Fit OE Replacement Bumper Bracket, with FREE 1-year UNLIMITED mileage warranty coverage on Evan-Fischer items purchased thru AUTO PARTS GIANT Store.
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

Bumper Bracket compatible with Chevrolet Silverado 1500 Classic 07 Front Right and Left Side Set of 2 Steel

  • Direct Replacement Bumper Bracket Compatible with 2003-2006 Chevrolet Avalanche 1500 & Silverado 1500 & GMC Sierra 1500.
  • Direct Replacement Bumper Bracket Compatible with 2007 Chevrolet Silverado 1500 Classic / Silverado 1500 HD Classic & GMC Sierra 1500 Classic / Sierra 1500 HD Classic.
  • Direct Replacement Bumper Bracket Compatible with 2005-2006 Chevrolet Silverado 1500 HD & GMC Sierra 1500 HD.
  • Replaces OE Number 12335637, 12335636 & Replaces Partslink Number GM1066147, GM1067147.
  • A high quality, Direct Fit OE Replacement Bumper Bracket, with FREE 1-year UNLIMITED mileage warranty coverage on Evan-Fischer items purchased thru AUTO PARTS GIANT Store.
Check Stock

Bumper Bracket compatible with Chevrolet Silverado P/U 03-07 Front Bolt On/Welded Fits 2007 Classic Steel Right Side

  • Direct Replacement Bumper Bracket Compatible with 2003-2006 Chevrolet Avalanche 1500 & Silverado 1500 & GMC Sierra 1500.
  • Direct Replacement Bumper Bracket Compatible with 2007 Chevrolet Silverado 1500 Classic / Silverado 1500 HD Classic & GMC Sierra 1500 Classic / Sierra 1500 HD Classic.
  • Direct Replacement Bumper Bracket Compatible with 2005-2006 Chevrolet Silverado 1500 HD & GMC Sierra 1500 HD.
  • Replaces OE Number 12335636 & Replaces Partslink Number GM1067147.
  • A high quality, Direct Fit OE Replacement Bumper Bracket, with FREE 1-year UNLIMITED mileage warranty coverage on Evan-Fischer items purchased thru AUTO PARTS GIANT Store.
Check Stock

10 UNIVERSAL LICENSE PLATE TAG HOLDER MOUNT MOUNTING RELOCATOR ADAPTER FOR FRONT BUMPER KIT BRACKETS AUTO CAR TRUCK (2 SCREWS + 2 WASHERS + 4 BOLTS +WRENCH & 4 BUILT IN NUTS) Soporte de matrícula (10)

  • ► ⇧⇧⇧ CHOOSE YOUR QUANTITY OF UNIVERSAL LICENSE PLATE BRACKETS ⇧⇧⇧ ► ???? Qty.: 1.
  • 200 ► ???? Compatibility: It’s a universal design made to fit all make and models with Flat Shape of the Bumpers..
  • ► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license plates issued by all 50 states. ► Dimensions: 6″ x 12″ (USA, CANADA & MEXICO LICENSE PLATE STANDARD) ► ???? Shape of Bracket: FLAT ► ???? Material: ABS Plastic ► ???? Color: BLACK ► ???? Surface Finish: Plastic.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS + 2 WASHERS + 4 BOLTS + WRENCH & 4 BUILT IN NUTS for fast & easy installation (IT’S VERY EASY TO INSTALL LICENSE PLATE ON OUR BRACKET !!! Includes detailed easy to follow instructions – Please see picture # 6) ► ???? You can fit this bracket to your bumper on plastic zipper also. Zipper is not included. (Please see picture # 7).
  • ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side o....
Check Stock

3 LICENSE PLATE TAG HOLDER MOUNT MOUNTING RELOCATOR ADAPTER FOR FRONT BUMPER KIT BRACKETS for ALFA ROMEO (ALL MODELS) (2 SCREWS +2 WASHERS +4 BOLTS +WRENCH & 4 BUILT IN NUTS) Soporte de matrícula (3)

  • ► ⇧⇧⇧ CHOOSE YOUR QUANTITY OF LICENSE PLATE BRACKETS FOR ALFA ROMEO ( 164, 4C, 4C Spider, 8c Competizione, 8c Spider, Giulia, Spider, Stelvio ) ⇧⇧⇧ ► ???? Qty.: 1.
  • 200 ► ???? Compatibility: It’s a design made to fit all ALFA ROMEO models ( 164, 4C, 4C Spider, 8c Competizione, 8c Spider, Giulia, Spider, Stelvio ) with Flat Shape of the Bumpers..
  • ► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license plates issued by all 50 states. ► Dimensions: 6″ x 12″ (USA, CANADA & MEXICO LICENSE PLATE STANDARD) ► ???? Shape of Bracket: FLAT ► ???? Material: ABS Plastic ► ???? Color: BLACK ► ???? Surface Finish: Plastic.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS + 2 WASHERS + 4 BOLTS + WRENCH & 4 BUILT IN NUTS for fast & easy installation (IT’S VERY EASY TO INSTALL LICENSE PLATE ON OUR BRACKET !!! Includes detailed easy to follow instructions – Please see picture # 6) ► ???? You can fit this bracket to your bumper on plastic zipper also. Zippers are not included.....
Check Stock

15 LICENSE PLATE TAG HOLDER MOUNT MOUNTING RELOCATOR ADAPTER FOR FRONT BUMPER KIT BRACKETS for ALFA ROMEO (ALL MODELS) (2 SCREWS +2 WASHERS +4 BOLTS +WRENCH &4 BUILT IN NUTS) Soporte de matrícula (15)

  • ► ⇧⇧⇧ CHOOSE YOUR QUANTITY OF LICENSE PLATE BRACKETS FOR ALFA ROMEO ( 164, 4C, 4C Spider, 8c Competizione, 8c Spider, Giulia, Spider, Stelvio ) ⇧⇧⇧ ► ???? Qty.: 1.
  • 200 ► ???? Compatibility: It’s a design made to fit all ALFA ROMEO models ( 164, 4C, 4C Spider, 8c Competizione, 8c Spider, Giulia, Spider, Stelvio ) with Flat Shape of the Bumpers..
  • ► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license plates issued by all 50 states. ► Dimensions: 6″ x 12″ (USA, CANADA & MEXICO LICENSE PLATE STANDARD) ► ???? Shape of Bracket: FLAT ► ???? Material: ABS Plastic ► ???? Color: BLACK ► ???? Surface Finish: Plastic.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS + 2 WASHERS + 4 BOLTS + WRENCH & 4 BUILT IN NUTS for fast & easy installation (IT’S VERY EASY TO INSTALL LICENSE PLATE ON OUR BRACKET !!! Includes detailed easy to follow instructions – Please see picture # 6) ► ???? You can fit this bracket to your bumper on plastic zipper also. Zippers are not included.....
Check Stock

Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Bracket for AUTO CAR TRUCK VAN SUV GOLF CART Quantity Discount (9.45$ to 5.60$)(each with 6 Unique Screws+Wrench+2 Built In Nuts) (1)

  • ► ⇧⇧⇧ CHOOSE YOUR QUANTITY OF LICENSE PLATE BRACKETS FOR AUTO CAR TRUCK VAN SUV GOLF CART ⇧⇧⇧ ►???? Qty.:1 (9.45$).
  • ► ???? Compatibility: It’s a design made to fit ALL MODELS with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
  • ► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license plates issued by all 50 states. ► Dimensions: 2.5&....
Check Stock

3 FRONT LICENSE PLATE TAG HOLDER MOUNTING MOUNT ADAPTER BUMPER KIT BRACKET for AUTO CAR TRUCK VAN SUV GOLF CART QUANTITY DISCOUNT (9.45$ to 5.60$)(each with 6 UNIQUE SCREWS+WRENCH+2 BUILT IN NUTS) (3)

  • ► ⇧⇧⇧ CHOOSE YOUR QUANTITY OF LICENSE PLATE BRACKETS FOR AUTO CAR TRUCK VAN SUV GOLF CART ⇧⇧⇧ ►???? Qty.:1 (9.45$).
  • ► ???? Compatibility: It’s a design made to fit ALL MODELS with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
  • ► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license plates issued by all 50 states. ► Dimensions: 2.5&....
Check Stock

2 Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Bracket for AUTO CAR TRUCK VAN SUV GOLF CART Quantity Discount (9.45$ to 5.60$)(each with 6 Unique Screws+Wrench+2 Built In Nuts) (2)

  • ► ⇧⇧⇧ CHOOSE YOUR QUANTITY OF LICENSE PLATE BRACKETS FOR AUTO CAR TRUCK VAN SUV GOLF CART ⇧⇧⇧ ►???? Qty.:1 (9.45$).
  • ► ???? Compatibility: It’s a design made to fit ALL MODELS with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
  • ► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license plates issued by all 50 states. ► Dimensions: 2.5&....
Check Stock

Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Bracket for ALFA ROMEO (All Models) QUANTITY DISCOUNT (9.45$ to 5.60$) (each with 6 Unique Screws + Wrench + 2 Built In Nuts) NEW (1)

  • ► ⇧⇧⇧ CHOOSE YOUR QUANTITY OF LICENSE PLATE BRACKETS FOR ALFA ROMEO ( 164, 4C, 4C Spider, 8c Competizione, 8c Spider, Giulia, Spider, Stelvio ) ⇧⇧⇧ ►???? Qty.:1 (9.45$).
  • ► ???? Compatibility: It’s a design made to fit all ALFA ROMEO models ( 164, 4C, 4C Spider, 8c Competizione, 8c Spider, Giulia, Spider, Stelvio ) with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
Check Stock

2 Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Bracket for ALFA ROMEO (All Models) QUANTITY DISCOUNT (9.45$ to 5.60$) (each with 6 Unique Screws + Wrench + 2 Built In Nuts) NEW (2)

  • ► ⇧⇧⇧ CHOOSE YOUR QUANTITY OF LICENSE PLATE BRACKETS FOR ALFA ROMEO ( 164, 4C, 4C Spider, 8c Competizione, 8c Spider, Giulia, Spider, Stelvio ) ⇧⇧⇧ ►???? Qty.:1 (9.45$).
  • ► ???? Compatibility: It’s a design made to fit all ALFA ROMEO models ( 164, 4C, 4C Spider, 8c Competizione, 8c Spider, Giulia, Spider, Stelvio ) with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
Check Stock