Reviews Budget Boom Arm

QuadCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX QuadCast, QuadCast S – RGB USB Condenser Microphone by SUNMON

  • 【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice.Before installing your hyperx microphone to the microphone arm, you can loosen the knob and adjust it to the angle you want to tighten after installing your gaming mic..
  • 【Stability】- Mic boom arm is dual suspension springs on each boom arm, the knobs are reinforced to keep the mic arm where you want it to be,protects the HyperX QuadCast S microphone from shaking, sinking and making noise..
  • 【Mic stand】- Before you receive this mic stand for hyperx quadcast, we pre-install the silver adapter for hyperx quadcast boom arm. Mic arm adapter can be converted from 3/8"to 5/8"for adapting HyperX QuadCast..
  • 【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the mic stand desk base could protect your desk without any scratches when you swivel side screw..
  • 【Package】- Included: 1x HyperX QuadCast Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount，Pre-installation completed). Note: NOT INCLUDED STREAMING MIC..
Check Stock

Large Desk Clamp Mount Replacement for Microphone Suspension Boom Scissor Arm, Table C Clip for Desktop Overhead Camera Tripod Mic Stand Lamp Base, Fits Up to 2.36 inch 6cm Thickness

  • [ 2 in 1 Versatile ] This table mounting clamp has 2 tube hole, it makes both vertical and horizontal use for the boom arm, mount your arm stand to table, bed post, sideboard, headboard.
  • [ Bigger Clamp Design ] This big c clip can mount to up to 2.36 inch/ 6cm thickness tabletop, meet your more application.
  • [ Durable Metal Built] This boom arm base is made of hight quality metal which is durable and sturdy, heavy duty mount for camera arm.
  • [ Wide Compatibility ] The both tube insert hole diameter is 0.47inch/1.2cm, it is compatible with most microphone arm like Blue Yeti mic boom arm, hyperx quadcast boom arm, rode psa1 boom arm, overhead camera arm, overhead phone arm, overhead tablet arm, overhead light arm stand, desk lamp.
  • [ Soft Foam ] The soft rubber padding can protect contact point from any scratches..
Check Stock

Neewer 2-Pack Triangle Wall Mounting Boom Arm for Photography Studio Video Strobe Lights Monolights Softboxes Umbrellas Reflectors,180 Degree Flexible Rotation,Max Length 70.8 inches/180CM Black

  • This boom arm must be fixed on a solid wall and the monolight in the picture is NOT included.
  • Compatibility: This wall mounting boom arm is perfect for supporting photographic equipment like studio video strobe lights, monolights, softboxes,....
  • Adjustable: It can be fixed on a solid wall, and its length is adjustable from 40.5 inches/103 centimeters to 70.8 inches/180 centimeters.
  • Triangle Design: More stable and reliable.
  • Each boom arm comes with 4 pieces of expansion screws helping mount the boom arm on the wall much....
  • Rotatable: The boom arm can be rotated up to 180 degrees, so you can adjust its angle and height synchronously.
Check Stock

Rockville GIGSTAND DUAL Microphone+Tablet/Smartphone Mic Stand For Karaoke Party

  • Package Includes: (1) RockvilIe GIGSTAND DUAL Microphone Stand with (2) Mic Clips and Detachable Boom. (1) RockvilIe IPS22 Smartphone/Tablet Mount - Screws In To any Mic Stand or Boom Arm. Applications: Guitar singer/songwriter (one mic for vocals and the other mic for the guitar). Studio recording use such as stereo mic arrays. Drum mics (you can mic any 2 drums with the one stand). Live performances.
  • With the lpad mount you can also mount your lpad and mic onto one stand which is perfect for speeches, sheet music playback, and more. Features: RockvilIe GIGSTAND DUAL Microphone Stand with (2) Mic Clips and Detachable Boom. The large vertical pole adjusts from 31 inch - 55 inch height. Holds 2 microphone securely in place. Foldable tripod legs with rubber grip feet. The stand includes 2 microphone clips for dual microphone mounting. One mic mounts on the large vertical pole.
  • The second mic mounts on the boom arm pole. The boom arm extends 26.37 inches and rotates 360. The boom arm is fully detachable. Premium painted steel will last through years of continuous wear. Light-weight and strong makes it perfect to take to any gig. The stand tubes are 20 mm thick for the bottom tube, and 15mm for the top tube. Includes 2 cable management clips for running ca....
Check Stock

Rockville iSTAND 85 Dual Desktop Boom Arm + Gooseneck Mic/iPhone/iPad Stand

  • What's in the Box: Dual Stand. Smartphone/tablet holder that attaches to either the gooseneck or the boom arm. Mic clip that attaches to either the gooseneck or the boom arm. 5/8” to ¼” webcam adapter that attaches to either the gooseneck or the boom arm. 3/8” to 5/8” mic adapter for use with any mic clip or shock mount.
  • Rockville iSTAND 85 Dual Desktop Boom Arm + Gooseneck Mic/iPhone/iPad Stand. Combo stand with boom arm and gooseneck so you can use multiple devices at the same time. You can use any 2 attachments at the same time (mic clip, tablet/phone holder, web cam adapter). Heavy duty steel weighted base . Boom arm has 2 arms that both can bend allowing for the ultimate adjustment flexibility..
  • Boom arm is 12.6” + 11”. 11.8” Gooseneck is Stiff and Sturdy Yet Bendable in Any Direction For Extreme Stability and Durability . Gooseneck is detachable. Professional Stand is Perfect for Studio, Podcasting, and Many Other Applications . All black design! Even the gooseneck is black. This looks great in a kitchen or on your computer desk. For Condenser Mics – This is Compatible With Any Shock Mount (Rockville Rockshock is Recommended). 5/8” Threading Fits Any Standard Condencer Mic.
  • Features of the tablet/phone holder: (2) 360 degree rot....
Check Stock

Neewer Microphone Arm Stand, Suspension Boom Scissor Mic Arm Stand with 3/8” to 5/8” Screw and Cable Ties Compatible with Blue Yeti, Snowball, Yeti X, Quadcast and Other Mics, Max Load 1.5kg

  • 【Adjustable Microphone Boom Arm】 Conveniently adjust the angle and height of this mic boom arm to suit your vocal recording need—just loosen the adjustment knob and adjust the boom arm. It’s also easy to fold up and carry. Perfect for stage/studio recording, broadcasting, TV stations, and more.
  • 【Stable Arm Support】 With the strong springs and metal positioning screws, the boom arm is compact yet stable enough to support a load of up to 3.3lb/1.5kg. And the springs don’t get in the way of tightening the adjustment knob.
  • 【Desk Mounting Clamp】 The desk clamp has rubber padding to protect the desk surface from scratches and scuffs. Compatible with most desks with a desktop thickness of up to 2”/5.3cm.
  • 【3/8” to 5/8” Screw Adapter & Mic Clip】 The 3/8” to 5/8” adapter allows you to mount a compatible microphone (like Blue Yeti or Blue Snowball) on the boom arm. It’s not compatible with Blue Yeti Nano which has a 1/4” thread mount. The microphone clip mounts a microphone with a shaft diameter of 1.26”/3.2cm to the boom arm.
  • 【Cable Straps & Solid Base】 The five cable straps help organize your microphone cable and make the boom arm look neat. The base connector is solid for durable and reliable holding.
Check Stock

Boom Arm with Extension Tube - Mic Boom Arm Compatible with Blue Yeti Microphone, Adjustable Boom Height Microphone Stand Mic Arm for HyperX QuadCast, Shure MV7, Rode, and Most Gaming Mic By SUNMON

  • Micphone Boom Arm-You don't have your own Mic Boom Arm yet, this large Boom Arm is made of metal, black in color, large enough to stretch anywhere you want, and fits most of the microphones on the market such as Blue Yeti Boom Arm, Hyperx QuadCast, Shure SM7B, Shure MV7, etc..
  • Stable-Is your Mic Arm still wobbly? The Mic Desk Clamp is large enough to hold the microphone without wobbling. It can withstand the weight of 1.4KG/3LB, which is enough to keep your microphone at the same level all the time..
  • Adjustable Height - An eye-catching height increase, desk microphone arm stand have equipped the extension tube to add 6.3 in height to the Boom Arm, which can make it higher than your monitor or fit more positions! No longer so confined to one position!.
  • Perfect Adaptability - This mic arm equip itself with 1/4" thread, carry 3/8" and 5/8" adapter, enough to adapt on most of the microphones..
  • Product Packaging: 1x Mic Boom Arm, 1x Desk Mic Stand Base, 1x 3/8" Adapter, 1x 5/8" Adapter, 1x Extension Tube..
Check Stock

SoloCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX SoloCast Gaming Microphone by SUNMON

  • 【Perfect Boom Arm】- Suspension boom arm stand suitablely fit your HyperX SoloCast microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
  • 【Stability】- Mic boom arm is dual suspension springs on each boom arm, protects the SoloCast microphone from shaking, sinking and making noise..
  • 【Mic stand】-The Mic Arm desk mount can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
  • 【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the base could protect your desk without any scratches when you swivel side screw..
  • 【Package】- Included：1x HyperX SoloCast Microphone Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). Note: NOT INCLUDED STREAMING MICROPHONE..
Check Stock

Razer Seiren X Mic Boom Arm with Foam Windscreen Suspension Boom Scissor Arm Stand with Pop Filter Cover for Razer Seiren X USB Streaming Microphone by SUNMON

  • Perfect Boom Arm: Suspension boom arm stand fit your Razer Seiren X Microphone, you can easily adjust the mic to the suitable angle or height to show....
  • Super Windscreen: Foam pop filter designed for Razer Seiren X USB Microphone with high quality acoustic foam material, filter the unwanted background....
  • Stability: Mic boom arm is dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise..
  • Mic stand: Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.8"/4.6cm thick. The stand arm can be extended up to....
  • Package included: 1x Windscreen only for Razer Seiren X Microphone, 1x Mic Scissor Arm Stand, 1x Screw adapter (3/8" to 5/8" Match most microphones....
Check Stock

NEEWER Microphone Arm Stand, Suspension Boom Scissor Mic Arm Stand with 3/8\ to 5/8\ Screw and Cable Ties Compatible with Blue Yeti Snowball Yeti X Quadcast, etc. Max Load 3.3lb/1.5kg (White)

  • 【Adjustable Microphone Boom Arm】 Conveniently adjust the angle and height of this mic boom arm to suit your vocal recording needs. Simply loosen the adjustment knob and adjust the boom arm. It's also easy to fold up and carry. Perfect for stage/studio recording, broadcasting, TV stations, and more.
  • 【Stable Arm Support】 With the strong springs and metal positioning screws, the boom arm is compact yet stable enough to support a load of up to 3.3lb/1.5kg. Designed so that the springs don't get in the way of tightening the adjustment knob.
  • 【Upgraded Desk Mount Clamp】This upgraded desk clamp has a 40.7 square centimeters contact area that is 8 times larger than that of a traditional microphone stand desk C clamp. Easily attach it to any desk up to 2.75"/7cm in thickness..
  • 3/8" to 5/8" Screw Adapter & Mic Clip】 The 3/8" to 5/8" adapter allows you to mount multiple types of microphones on the boom arm, compatible with Blue Yeti, Blue Yeti Nano, Blue Snowball etc. Please note that it's not compatible with Blue Yeti Nano which has a 1/4" thread mount. The microphone clip mounts a microphone with a diameter of 1.26"/3.2cm to the boom arm.
  • 【Cable Straps & Solid Base】 The five cable straps help organize your microphone cable and keep the boom arm l....
Check Stock

InnoGear Desktop Microphone Stand, Adjustable Mic Stand with Boom Arm, 0.8 lb Counter Weight, Mic Clip and 3/8\ to 5/8\ Screw Adapter for Kick Drums, Guitar Amps, Blue Yeti and Blue Snowball

  • Boom Arm with Counter Weight: This desktop microphone stand comes with one good quality boom arm and one 0.8 lb counter weight. You could easily adjust the position of the boom arm and counter weight according to your needs. When the boom arm is extended halfway, the max load is 5 lbs and when the boom is fully extended, the max load is 3 lbs..
  • Well Made Weighted Steel Base: The high-quality steel base is designed as a trapezoid, more sturdy and more stable. It has two non-slip pads at the bottom to achieve a better usage experience. What’s more, you could place items on the smooth and delicate surface, saving space on the table..
  • Adjustable Height and Flexible Angle: The height of this InnoGear upgraded heavy-duty microphone stand could be adjustable from 11'' to 16'' inches while the boom arm is easy to move up and down and 360° rotate, allowing you to find the perfect position for your microphone..
  • Another Desktop Stand without Boom Arm: Screw the T-shape tube off the adjustable height shaft and you could connect the mic clip (included) or shock mount (not included) to the stand and attach your microphone. This is another usage of the desktop stand without boom arm if you have the need for it..
  • Strong Compatibility: This upgraded tabletop mic stand....
Check Stock

K670 USB Mic Boom Arm with Foam Windscreen, Suspension Boom Scissor Arm Stand with Pop Filter Cover Compatible with Fifine K670 K658 Microphone by SUNMON

  • Perfect Boom Arm: Suspension boom arm stand compatible with your Fifine K670 K658 mic, you can easily adjust the mic to the suitable angle or height to show your perfect voice.
  • Super Windscreen: Foam pop filter designed compatible with Fifine K670 USB mic with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality..
  • Stability: Fifine K670 boom arm is dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise..
  • Mic stand: Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.8"/4.6cm thick. The stand arm can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
  • Package included: 1x Windscreen compatible with Fifine K670 mic, 1x Mic Scissor Arm Stand, 1x Screw adapter (3/8" to 5/8" Match most microphones and shock mount)..
Check Stock

Donner Boom Arm Mic Stand Adjustable Tube Style Suspension Scissor Heavy Duty Microphone Arm with Desk Clamp 3/8 to 5/8 Screw Adapter for Live Streaming Radio Podcasting Gaming-MS 1

  • DONNER Boom Arm - Donner MS-1 Pro Desk Microphone Boom Arm, all-tube-style design with internal springs and desk C-clamp. 360° rotatable design will....
  • Heavy Duty Mic Arm - The microphone boom arm is made of premium metal that is designed to last years. This boom mic stand can reach up to 33 inches....
  • All-Tube Internal-Spring Design - Hidden Cable Management System by Donner mic arm specially designed for your live streaming and video productions to....
  • Stable Adjustable Mic Stand - Up to 2.5 inches clip desk clamp attached for you to mount the microphone arm on your table much stable and reduce....
  • Ideal Choice for Widely Application - No matter you are a streamer, a Youtuber, a recording artist, or a podcaster, a portable sturdy boom arm mic....
Check Stock