Reviews Bsp Thread Tap

BSP BRITISH STANDARD PIPE BSPP PARALLEL TAP AND DIE SET - 8 SIZE 1/8 TO 1

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 24 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14, 7/8" - 14, 1" - 11 TPI.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

Master Airbrush Brand 100 Pipette Eyedroppers for Liquid Transfer and Airbrush Paint

  • Master Airbrush Brand Airbrush Fitting Conversion Adapter for Badger Airbrushes.
  • Converts a Badger airbrushes male M5 0.5 mm thread size to standard 1/8" BSP male thread size for easy connection to 1/8" BSP air hoses.
  • Adapter has 1/8" BSP male threads on the outside and Badger size female threads on the inside.
  • The adapters 1/8" BSP hose thread size is the most common hose fitting size used for many popular airbrush brands like Master and Iwata.
Check Stock

2 Pack G 1/2 BSP Female Thread to US 1/2 NPT Male Thread Pipe Fitting,Brass Pipe Fitting Adapter,G to NPT Adapter 1/2 Inch

  • Size: 1/2 inch G thread (metric BSP) female thread to 1/2 inch NPT (standard pipe thread) male thread. G thread can fit BSP,NPS and G thread.
  • Sturdy material: made of high-quality brass, sturdy and corrosion-resistant.
  • Leak-proof design: the adapter is equipped with a rubber gasket to prevent leakage.
  • Please note: G thread (BSP) and NPT thread are two different threads, please purchase after confirmation..
Check Stock

Brass Ceramic Stem Disc Cartridge Faucet Valve Replacement Quarter Turn 1/2\ for Bathroom Kitchen Tap (1 Pair Hot & Cold)

  • Solid brass body and stem. 20 teeth on spline (top of stem) for handle, stem drilled with M4 threaded hole..
  • Clockwise (Blue) and Anti-clockwise (Red) to turn the tap on..
  • Rubber O ring at the bottom, with threaded collar..
  • Fit for taps of basin in bathroom, kitchen, etc. Suitable for both cold water and hot water..
Check Stock

iFCOW 12pcs M6x1 Thread Repair Kit Self Tapping Thread Insert Twist Drill Bit Installation Tool

  • Product Name : Self Tapping Threaded Inserts.
  • Package Content : 2 x Self Tapping Threaded Inserts(Contenido del paquete: 2 x tapping inserciones roscadas.
Check Stock

EKWB EK-AF G1/4" Rotary Y-Splitter Fitting, 2x Female to Male Ports, Black

  • Y-shaped adapter fitting with 2 (two) G1/4″ BSP Female threads and one rotary G1/4″ BSP Male thread.
  • Useful for splitting or combining the liquid flow in parallel configurations.
  • Threading: 2x G 1/4″ (Female), 1x G 1/4″ (Male).
  • Thread length: 7.0mm (Female), 5.0mm (Male).
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

GESHATEN 1/2” G Thread (BSP) Female to 1/2” NPT Male Connector, Brass BSP to NPT Adapter 1/2 Inch, Industrial Metal Brass G Thread to Pipe Fittings Connect (2 Pack)

  • Type: 1/2 inch G Thread (Metric BSP) female to 1/2 inch NPT (National Pipe Thread) male..
  • Durable: Solid brass construction, durable and rustproof, more reliable than aluminum or plastic materials..
  • No Leakage: Rubber washer included to eliminate leak. Heavy duty brass ensures no leaks due to deformation..
  • Package Includes: 2 PCS * 1/2" G Female to 1/2” NPT Male Connector..
  • Please note that G Thread (BSP) and NPT are different types of threads. To meet your requirements, please confirm the adapter you need before placing an order..
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

MOTOKU New HSS 1/16-27 NPT Taper Pipe Thread Tap

  • Cuts internal threads in pipes. Ideal for pipe fittings..
  • Nominal size of the tap is that of the pipe fitting being tapped.
  • Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP).
  • Includes one taper tap each of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt, and 1" - 11-1/2 npt. Made in the USA..
Check Stock

Thread Forming Tap Bttm 1/4-20 Uncoated

  • Price For: Each Tap Dimension Type: Inch Tap Style: Thread Forming Number of Pieces: 1 Thread Direction: Right Hand Tap Finish: Uncoated Item: Tap Number of Flutes: 0 Standards: ANSI Tap Grouping: Tap List Number: 5502 Shank Dia.: 0.255" Thread Length: 5/8" Overall Length: 2-1/2" Tap Thread Size: 1/4"-20 Tap Thread Type: UNC.
  • Tap Material: Vanadium High Speed Steel Tap Chamfer: Bottoming Pitch Diameter Limit: H4 Country of Origin (subject to change): United States.
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock