Reviews Broken Headphone Jack Removal Tool

Upgrated to Version 2.0 - Headphone Jack Removal Tool - Headphone Plug Extraction Tool, Tubes of Different Thickness, Jack Remover

  • PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack..
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved..
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above..
  • GUARANTEES: This set of headphone removal tool is considered a SINGLE-USE tool. But we offer a 100% satisfaction guarant....
Check Stock

AOYUTC Metal Tube Headphone Plug Extraction Tool- Headphone Tip Removal Tool,Remove Broken Headphone Plug from Headphone Jack of Mobile Devices

  • PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes....
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This....
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table.....
  • HOW TO USE: Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull....
  • GUARANTEES: This set of headphone removal tool is considered a single-use tool. But we offer a 100% satisfaction guarantee. If you are not satisfied....
Check Stock

kenddeel Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices

  • ️Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks..
  • ️Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover..
  • ️Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough..
  • ️Tep: This set of headphone jack remover tool is considered a single-use tool..
  • ️If you have any question, please feel free to contact us by email..
Check Stock

GripStick Headphone Plug Extraction Tool

  • PRODUCT COMPOSITION: This headphone extraction tool kit cutting has stainless steel pipes. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack..
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 100 bucks will be saved..
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above..
  • It is portable and can be used to disassemble glasses and watches and some other electronic products. Hope you like it!.
Check Stock

Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover ，Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices 6 PCS

  • Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks..
  • Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover..
  • Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough..
  • Tep: This set of headphone jack remover tool is considered a single-use tool..
  • If you have any question, please feel free to contact us by email..
Check Stock

GripperX Headphone Plug Extraction Tool with Key Ring and Cleaning Brush - Remove Broken Headphone Plug from Headphone Jack of Mobile Devices

  • NO GUARANTEES: This tool comes with no guarantees implied or expressed and should be considered a single-use tool..
  • PURPOSE: GripperX is designed for the purpose of extracting a headphone plug that has broken apart, leaving the tip of the plug lodged inside the headphone jack of a mobile device..
  • HEADPHONE JACKS: Designed to be used on 3.5mm jacks found on phones, laptops and smaller devices..
  • HOW TO USE: Insert GripperX between headphone jack housing and broken plug. You may need to lightly tap it in. It should go in about the same length of the headphone plug. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove. Restore functionality to your device's headphone jack..
  • USE WITH CAUTION: Rotating or inserting too far may damage the device. The opening is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool..
Check Stock

JUYEER Headphone Plug Extraction Tool - Customized Metal Tube Grip Stick Puller, Headphone Tip Removal Tool with Headphone Hole Cleaning Brush

  • ✔️If this doesn't solve your problem, please feel free to contact us by email. You don't need to return the product, we can give you a full refund..
  • ✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds..
  • ✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove..
  • ✔️GUARANTEES: This tool considered to be a single-use tool. But if you can’t solve your problem with this tool, you can take a picture and send that to us. And then you can get a full refund without a return..
  • ✔️Dear customers, the breakage of each earphone plug is different. We can't guarantee that this tool is suitable for all cases. Before you use this tool, please read the instructions carefully. Because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug....
Check Stock

SOSS GAMING 2022 Headphone Jack Plug Port 3.5mm Headset Connector Port Socket for Xbox One Controllers - for Both Standard and S Models 1708 4 Pack

  • MONEY SAVER: Broken headphone jack? Don't worry! This kit is the perfect solution to make your Xbox One Controller working like new again. No need to....
  • EASY INSTALLATION - Replacement of your headphone jack could have never been easier. With so many YouTube tutorial videos out there, practically....
  • COMPATIBILITY - These bumpers are compatible with Xbox One Controllers Models 1708 that have the 3.5mm headphone jack equipped which includes the S....
  • PACKAGE INCLUDES - 4X Headphone Jacks, 1X T8 Torx Screwdriver, 1x T6 Torx Screwdriver, and 1X Prying Tool. All parts are high quality to get you back....
  • 100% SATISFACTION GUARANTEE - We back our products! If you are not 100% satisfied with your purchase within 90 days, we will refund or send you a....
Check Stock

Purple For Apple iPod Classic Hard Case with Aluminum Plating 80gb 120gb 160gb

  • Headphone Audio Jack Hold Switch Flex Replacement Compatible with iPod Classic 6th 7th 80gb 120gb 160gb.
  • Tips: This is replacement to replace your old damage Headphone Jack Flex, don't include instructions, please install it by a professional technician..
  • Broken your Headphone Jack Flex? don't need to change new device, just buy this item and replace your damage Headphone Jack , let your machine work....
  • Compatible with: iPod Classic 6th 7th 80gb 120gb 160gb (Please check your model before your purchase).
  • Shipped by Amazon. Any questions, please contact us first, we will try our best to help you..
Check Stock

Aiboco Clear Hard Case for iPod Classic 7th Gen 160GB Thin Model 6th Gen 80GB 120GB

  • Headphone Audio Jack Hold Switch Flex Replacement Compatible with iPod Classic 6th 7th 80gb 120gb 160gb.
  • Tips: This is replacement to replace your old damage Headphone Jack Flex, don't include instructions, please install it by a professional technician..
  • Broken your Headphone Jack Flex? don't need to change new device, just buy this item and replace your damage Headphone Jack , let your machine work....
  • Compatible with: iPod Classic 6th 7th 80gb 120gb 160gb (Please check your model before your purchase).
  • Shipped by Amazon. Any questions, please contact us first, we will try our best to help you..
Check Stock

31 Pieces Replacement Game Controller Kit, Thumbsticks Grips Cover, Joystick, LB RB Bumpers Triggers, ABXY Buttons, Headphone Jack Plug Port, Screwdriver Compatible with Xbox ONE S Controller Model 1708 [video game]

  • It is simple and convenient to install and is the first choice for replacing accessories.
  • Notes: before place the order, please check the controller is right version.
  • LB RB bumpers triggers: these replacement LB RB bumpers set is specially compatible with Xbox one S Controller with 3.5 mm headphone jack, practical for repairing your broken bumper buttons or dysfunctional wireless controller shell.
  • Made of impact resistant ABS material, not easy aging and very durable.
  • Headphone jack plug port: these bumpers are compatible with Xbox One Controllers Models 1708 that have the 3.5 mm headphone jack equipped which includes the S model controllers.
  • As long as you have one of these controllers, you can once again enjoy a working headphone jack.
  • Replacement button: replacement thumbsticks joysticks, ABXY buttons mod kit and silicone luminous thumb stick grips caps cover, which is a good replacement for your damaged or non-working 3D joystick axis and thumb stick, enable you perfect playing experience.
  • Package include: 4 pieces 3D analog joysticks, 4 pieces thumbsticks caps, 2 pieces LB RB bumpers triggers, 2 pieces middles,4 pieces 3.5 mm headset connector port socket, 4 pieces red transparent replacement button XYAB buttons, 8 pieces....
Check Stock

CoverON® BlackBerry Q5 Hard Silicone Hybrid Kickstand Case - Hot Pink

  • Made with a High Quality shatter-proof hard plastic and a soft flexible silicone skin for maximum protection.
  • Precisely engineered to preserve full use of volume buttons, charger, camera, microphone, headphone jack, and all other ports.
  • A pop-out kickstand is attached on the back of the case for hands-free viewing of your device.
  • Includes case removal pry tool - 90 Day Warranty on CoverON cases.
Check Stock

Headphone Splitter Adapter,CableCreation 3.5mm Male to 2 Port 3.5mm Female Y Jack Splitter Adaptor Compatible with Headset, Earphone, iPhone, iPad, iPod, Samsung, LG, Tablets, MP3 Players&More, Black

  • ✅ [Audio Splitter Adapter]:CableCreation 3.5mm audio stereo splitter cable converts one single 3.5mm stereo jack to two 3.5mm stereo jacks..
  • ✅ [Headphone Splitter Super Function]:1/8 splitter adapter perfect for sharing an ipad ,phone, tablet or laptop to listen music,watch movies with your lover while traveling..
  • ✅ [Super Sound Quality]:Aux Splitter with 24K gold-plated connector transmit optimal stereo audio.The headphone adapter designe could keeps the headphone jack from getting caught and broken off..
  • ✅ [Universal Compatibility]:Headphone Splitter Adapter Devices with any standard 3.5mm jack ports.For example: phone, tablet,iPod, iPhone, iPad, Kindle Fire tablets, Samsung Galaxy smartphones and tablets, Google Nexus smartphones.
  • ✅ [What you get]:CableCreation 3.5mm headset adapter x1-pack and worry-free two years warranty.If you have any problem with our Headphone Splitter Adapter please contact with us,you will be replied within 24 hours..
Check Stock