Reviews Broadband Amplifier With Gain

Eujgoov RF Module AD8317 Detector Logarithmic Amplifier AD8317 RF Power Meter 1M-10G Hz

  • Accurate RF Measurement: AD8317 detector logarithmic amplifier provides accurate RF measurement. The measurement accuracy is better than ±1 dB in a dynamic range greater than 50 dB, and a power controller with adjustable power amplifier or variable gain amplifier is provided at the output..
  • Wide Operating Frequency Range: The wide operating frequency range from 1M HZ to 10G Hz supports all cellular standards, broadband wireless standards and private dedicated systems in frequency bands..
  • Shielding Case: With shielding case and antireverse protection diode in the 3V to 5V power supply voltage range..
  • Sturdy & Durable: 1.6mm thick PCB double panel, sturdy and durable, long service life, large heat dissipation area, stable operation, long running time, easy to use, good performance, small size, easy to carry and store..
  • Working Temperature: AD8317 provides better accuracy, temperature stability, and 5 ns fast output response in the temperature range of 40 ℃ to + 85 ℃, and is used for RF burst detection at 125 MHz..
Check Stock

ZDTECH Directional Antenna Cell Phone Yagi Antenna 8 to 9dBi High Gain 3G/4G/5G/LTE Universal Fixed Mount Outdoor LPDA Antenna 698-4000 MHz

  • 【High Gain】The directional yagi-style antenna features 8dB-9dB gain, work with all 50 Ohm cellular amplifier systems, compatible with all US....
  • 【Outside Cellular Antenna】The Directional Roof Antenna is designed for use on stationary objects such as buildings or houses by capturing existing....
  • 【Highest Quality】The cell antenna frequencies range is 698-960mhz & 1710-2700mhz &3400-4000mhz. This Wideband antenna features an N-Female....
  • 【Waterproof Structure】This Wideband directional antenna from features a rugged waterproof structure that’s designed to withstand damage from the....
  • 【Compatible】Compatible with 2G, 3G, 4G,5G,LTE, xLTE, AWS, GSM & CDMA Broadband Router, Modem, etc. Enhance the network signal on Verizon, AT&T,....
Check Stock

K-180WLA Active Loop Broadband Receiving Antenna 100kHz-180MHz 20dBi SDR Radio Antenna Loop Small Loop Short Wave Antenna

  • 【Complete Protection Circuit】The K-180WLA Active Loop Broadband Receiving Antenna has a complete protection circuit for anti-reverse battery, over discharge, over charge, over current, and antenna terminal short circuit.With numerically-precision processed shells, PCB high-frequency design, feeder high-density dense copper pure copper 50-1.5 feeder, materials used Create an ultra-high cost-effective antenna for the entire network..
  • 【High Quality】All the screws of the K-180WLA Active Loop Broadband Receiving antenna are made of 304 steel, and the preamplifier box is fully waterproof, which can be used for long-term outdoor wind and rain.It provides a gain of about 20DB, even when working to 450MHZ gain, there is still about 8.9DB..
  • 【Convenience】The K-180WLA is an active loop broadband receiving antenna,built-in 3.7V 18650 flat head lithium battery. No external power supply required. The USB charging port is compatible with 5V charging plug and charging cables of Android phones. Using UHF low-noise preamplifier. The gain flatness is very good within the ultra-wide operating frequency of 0.1-180MHZ..
  • 【Widely Used】The receiving frequency of this K-180WLA Active Loop Broadband Receiving Antenna covers long wave, medium wave, short wave, FM br....
Check Stock

Proxicast 3G/4G/LTE Universal Wide Band 5 dBi Omni-Directional Paddle Antenna for Cisco, Cradlepoint, Digi, Pepwave, Sierra Wireless and Many Others (ANT-120-007-2PK)

  • Direct Replacement for Low Gain Antennas included with many Cellular Products.
  • Boosts Signal Strength and Upload / Download Data Speeds on AT&T, Verizon, Sprint, T-Mobile, USCellular, Bell, Telus, Rogers, Telcel, Movistar and most other cellular carriers.
  • Compatible with any 3G/4G/LTE Broadband Router, Modem, Trail Camera or Amplifier / Booster with an SMA Antenna Jack.
  • 5 dBi Omni Antenna Swivels and Tilts to Increase Weak Signal Reception and Improve Poor Internet Speeds from Remote Cell Towers.
  • SMA Male connector screws directly to modem / router / amp or magnetic base (sold separately).
Check Stock

ACEIRMC 2pcs MAX9814 Electret Microphone Amplifier with Auto Gain Control for Arduino

  • 1.The MAX9814 is a high-quality microphone amplifier with automatic gain control (AGC) and low-noise microphone bias. The device features a low-noise preamplifier, variable gain amplifier (VGA), output amplifier, microphone-bias-voltage generator and AGC control circuitry..
  • 2.A trilevel digital input programs the output amplifier gain. An external resistive divider controls the AGC threshold and a single capacitor programs the attack/release times..
  • 3.The low-noise preamplifier has a fixed 12dB gain, while the VGA gain automatically adjusts from 20dB to 0dB, depending on the output voltage and the AGC threshold. The output amplifier offers selectable gains of 8dB, 18dB, and 28dB. With no compression, the cascade of the amplifiers results in an overall gain of 40dB, 50dB, or 60dB..
  • 4.The MAX9814 is available in the space-saving, 14-pin TDFN package. This device is specified over the -40°C to +85°C extended temperature range. MAX9814: Simplified Block Diagram MAX9814: Simplified Block Diagram Enlarge+.
  • 5.A trilevel digital input programs the ratio of attack-to-release time. The hold time of the AGC is fixed at 30ms. The low-noise microphone-bias-voltage generator can bias most electret microphones..
Check Stock

Proxicast 3G/4G/LTE Universal Wide Band 5 dBi Omni-Directional Paddle Antenna + SMA Magnetic Base for Cisco, Cradlepoint, Digi, MoFi, Pepwave, Sierra Wireless and Many Others (ANT-120-007-MAG-2PK)

  • Replaces Low Gain Antennas included with many Cellular Products.
  • Boosts Signal Strength and Upload / Download Data Speeds on AT&T, Verizon, Sprint, T-Mobile, USCellular, Bell, Telus, Rogers, Telcel, Movistar and most other cellular carriers.
  • Compatible with any 3G/4G/LTE Broadband Router, Modem or Amplifier / Booster with an SMA Antenna Jack.
  • Enables Antenna to be Positioned to Increase Weak Signal Reception and Improve Poor Internet Speeds from Remote Cell Towers.
  • 2 Pack of: 5 dBi Omni Antenna + 3" Magnetic Mounting Base + 79" Coax Cable + SMA Male Connector for a Stronger more Powerful Connection.
Check Stock

SHCA Colored BASS KNOB with Leads (Blue)

  • Simple Connection: the Rca Volume Control RCA output connector to the car stereo and the input RCA connector to the device, no additional wires are required. With RCA composite cables,this amplifier controller offers high-quality signal transmission.Adds subwoof level control to any head unit or balances a multiple amplifier installation.
  • This RCA amplifier controller offers high-quality signal transmission with RCA composite cables.Made from high quality materials and metal for optimal signal transfer.Adds subwoof level control to any head unit. Perfect for balancing the system to change music style.
  • Perfect for balancing the system to change music styles, control your sub-woofer output, you can set the subwoofer on maximum gain and then vary the knob to taste as per genre or media good fit for Car, Motorcycle, Speakers, Home.Stereo RCA input and output. Simple in and out connections,no additional wiring needed.Mini size easy to installation by DIY without manuals.
  • RCA amplifier is control the gain level / volume of devices connected to the car stereo, such as speaker, amplifier, bass, etc. Dash Mount Amplifier Level Control for Volume Adjustment. dash mount rca amplifier level control is used to adjust amplifier gain, power level, stereo, equalizer or....
Check Stock

Proxicast 5-8 dBi High Gain External 4G/5G Antenna Compatible with Cisco, Cradlepoint, Netgear, Pepwave, MoFi, CalAmp, Digi, Sierra and Other Routers & Modems with SMA Connectors (ANT-120-006-2PK)

  • Universal Direct Replacement for Low Gain SMA Male "Rubber Duck" Style Antennas included with many Cellular Products.
  • Boosts Signal Strength and Upload / Download Data Speeds and Increases Range on AT&T, Verizon, T-Mobile, USCellular, Bell, Telus, Rogers, Telcel, Movistar and most other cellular carriers.
  • Compatible with any 4G or 5G Sub-6 Broadband Router, Modem or Amplifier / Booster with an SMA Antenna Jack.
  • 5 to 8 dBi Omni Antenna Swivels and Tilts to Increase Weak Wireless Signal Reception and Improve Poor Internet Speeds from Remote Cell Towers.
  • Supports all 4G/LTE Bands and 5G NR FR1 Low-Frequency Bands n71 (T-Mobile), n5 (AT&T, Verizon), n2 (Verizon), n66 (Verizon) and Mid-Frequency C-Bands n41 (T-Mobile) and n77 (AT&T, Verizon). Also Compatible with FirstNet and CBRS Systems..
Check Stock

4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter/Equalizer with Passive Return, F59 Terminators (Lindsay LSA84-EQ8)

  • This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality..
  • Amplifier includes an integrated equalizer which varies amplifier gain. The equalizer provides more amplification to high frequency signals, which tend to get weaker over long cable runs. All ports provide an amplified signal, with a minimum gain of +0dB @ 54MHz up to +7.5dB gain @ 1000MHz..
  • Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems..
  • Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal..
  • Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV recepti....
Check Stock

SHCA Clear BASS KNOB with Leads (Blue)

  • Compact And Powerful:Rca Level Controller Made from high quality materials and metal for optimal signal transfer，Car Audio Amplifier Gain Less Noise and more bass.
  • Simple Connection:Simply connect the RCA output connector to the car stereo and the input RCA connector to the device, no additional wires are required. With RCA composite cables,this amplifier controller offers high-quality signal transmission.
  • Unstoppable Music:Rca Level Controller Perfect for Balancing the System to Change Music Styles,Adds subwoof level control to any head unit, While Driving Adjust Can Gain the Amplifier.
  • Innovative Design:Car Amplifier Universal Bass Remote control Knob,Works with most head unit and amplifier combinations.
  • Easy installation:Mini size easy to installation by DIY without manual, especially good fit for Car, Motorcycle, Speakers, Home Theater.
Check Stock

Universal RCA Level Controller Car Amplifier Audio RCA Amplifier Gain Level Bass Amplifier Volume Control Knob Sub Amp Volume Control Cable for Car, Motorcycle, Speakers, Home Theater(2022 Version)

  • This RCA amplifier controller offers high-quality signal transmission with RCA composite cables.Made from high quality materials and metal for optimal signal transfer.Adds subwoof level control to any head unit. Perfect for balancing the system to change music style.
  • Simple Connection: the Rca Volume Control RCA output connector to the car stereo and the input RCA connector to the device, no additional wires are required. With RCA composite cables,this amplifier controller offers high-quality signal transmission.Adds subwoof level control to any head unit or balances a multiple amplifier installation.
  • RCA amplifier is control the gain level / volume of devices connected to the car stereo, such as speaker, amplifier, bass, etc. Dash Mount Amplifier Level Control for Volume Adjustment. dash mount rca amplifier level control is used to adjust amplifier gain, power level, stereo, equalizer or crossover volume when you driving.
  • Perfect for balancing the system to change music styles, control your sub-woofer output, you can set the subwoofer on maximum gain and then vary the knob to taste as per genre or media good fit for Car, Motorcycle, Speakers, Home.Stereo RCA input and output. Simple in and out connections,no additional wiring needed.Mini size easy to i....
Check Stock

Monolith THX AAA Balanced Headphone Amplifier Featuring THX AAA 887 Technology, Balanced and Single-Ended Inputs

  • The THX Achromatic Audio Amplifier (THX AAA) ensures the ultimate no compromise headphone audio experience by delivering the fidelity audio with infinitesimally low levels of noise, distortion, and power consumption..
  • Three gain settings: The amplifier features three different gain settings for optimal compatibility with all headphones. The lowest gain setting is the most appropriate for sensitive IEMs..
  • Balanced and single-ended inputs: The amplifier features an XLR balanced input, plus 1/4in and 3.5mm single ended inputs to eliminate the need for adapters..
  • High grade CNC-milled aluminum with black anodized finish chassis material..
Check Stock

Marantz PM6007 Integrated Amplifier with Digital Connectivity

  • Includes: 1 TV Antenna Distribution Amplifier and 1 RG6 coax cable.
  • Perfect For: This 24db distribution amplifier is used to strengthen signal reception from your antenna to TV, providing high output capability with minimal distortion.
  • Features: Heavy duty metal housing, with built-in coaxial mounting ports, a power indicator light, adjustable gain control, and return path.
  • Versatile: Enjoy the control of variable gain in VHF / UHF / FM bands, ATSC, NTSC, FTA, OTA.
  • Quality Assurance: This TV amplifier features a high quality, commercial grade build and Includes a US manufacturers warranty.
Check Stock