Reviews Brinell Rockwell Vickers Hardness

Hardness Testing File Set

  • 【Accurately measured value】-----Precision measurement circuit to ensure Indication error ± 0.5% (HLD = 800), showing the value of repeatability 0.8%.
  • 【Leeb hardness measurement】-----Based Leeb hardness measuring principle, can detect a variety of metal materials.
  • 【Supports a variety of standard hardness】-----Real-time display and conversion: Brinell HB, Rockwell HRC, Vickers HV, Shaw HS, and three kinds of intensity values.
  • 【Applicable Materials】-----Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (brass), an alloy of copper and tin, copper(bronze).
  • 【Application】-----1)Bearings and other parts.
  • 2)Failure analysis of pressure vessel, steam turbine generator group and equipment.
  • 4)Mechanical or permanent assembly installed.
  • 6)The original record of formal requirements on test results.
Check Stock

Crescent H.K. Porter 24\ PowerPivot™ Center Cut Double Compound Action Bolt Cutter - 0190MCP

  • Powerpivot technology for superior cutting power.
  • Precision engineered induction Hardened center cut blades.
  • Heat treated for wear resistance and long cutting life.
  • Maximum hardness of material to be cut: Brinell 455/Rockwell C48.
Check Stock

Klein Tools 63050-INS Cable Cutter, Insulated Cable Cutter w/One-Hand Shearing for Aluminum, Soft Copper, Communications Cable

  • Handles have heavy vinyl grips with flat grips ends for 90-degree cuts.
  • All-purpose, center-cut jaws for soft, medium, and hard metals.
  • Forged, alloy tool steel jaws are precision ground for sure, efficient cutting and long life.
  • Lockplate reinforcement prevents jaw bolts from loosening or turning, keeps jaws in correct alignment.
  • Cutting capacities for soft and medium materials is up to Brinell 300, Rockwell C31.
  • Cutting capacities for hard materials is up to Brinell 400, Rockwell C42.
Check Stock

Adsire Portable Reliable Wear-Resist Magnetic Switch, Safe Magnetic Switch Cover, for Metal Door Window

  • Pack of 3 Track-Mount Overhead Door Magnetic Contact Switches.
  • Used for overhead doors in both industrial and residential situations where a wide gap is present.
  • 36" (91cm) Wire leads enclosed in armored cable.
  • Contact Type: SPST, iridium-plated to have a high melting point and Vickers hardness for higher power handling and longer expected life.
Check Stock

PHR-1 Small Portable Rockwell Hardness Tester (PHR-1)

  • Portable indentation hardness tester. Single hand operation.
  • Easy conversion. The test results can be converted to HB, HR,HV and HW easily through conversion table..
  • High sensitivity. Featured with 100 scales, much more sensitive than Webster hardness testers applied in aluminum alloys industry..
  • Wide valid testing range equivalent to Brinell hardness 25-150HBW..
  • Barcol Impressor is mainly applied to test aluminum and aluminum alloys..
Check Stock

Isoflex Topas L32 1 X 370g Cartridge

  • Hardness Tester: Determine material hardness with this hardness testing file set by sliding the file across the object's surface.
  • Color-Coded: The file toolset, with six color-coded files, indicates hardness from 40 to 65 HRC.
  • included chart also shows the appropriate Vickers Hardness (HV).
  • Easy to Store: The hardness test kit comes conveniently packaged in a leath­er-like case with a Velcro-lined flap.
  • the files are approximately 0.157" in diameter and 7" in length.
  • Set Includes: Six color-coded files indicate hardness from 40 to 65 HRC and a vinyl case.
Check Stock

AMTAST Barcol Impressor Portable Indentation Hardness Tester, Test Range 0~100HBa Equal to 25~150HBW

  • Portable indentation hardness tester. Single hand operation.
  • Easy conversion. The test results can be converted to HB, HR,HV and HW easily through conversion table..
  • High sensitivity. Featured with 100 scales, much more sensitive than Webster hardness testers applied in aluminum alloys industry..
  • Wide valid testing range equivalent to Brinell hardness 25-150HBW..
  • Barcol Impressor is mainly applied to test aluminum and aluminum alloys..
Check Stock

HOJILA Leeb Hardness Tester Metal Stainless Steel Alloy Copper Hardness Testing Gauge Meter HRB HRC HV HB HS HL

  • Hardness Tester: Determine material hardness with this hardness testing file set by sliding the file across the object's surface.
  • Color-Coded: The file toolset, with six color-coded files, indicates hardness from 40 to 65 HRC.
  • included chart also shows the appropriate Vickers Hardness (HV).
  • Easy to Store: The hardness test kit comes conveniently packaged in a leath­er-like case with a Velcro-lined flap.
  • the files are approximately 0.157" in diameter and 7" in length.
  • Set Includes: Six color-coded files indicate hardness from 40 to 65 HRC and a vinyl case.
Check Stock

RotoMetals Lyman #2 Bullet Ingot (90% Lead, 5% Tin, 5% Antimony) about 5 pound ingot

  • Ingots are approximately 8-3/4" x 1" x 2" and weigh 5 pounds (+/- .25)..
  • The Brinell Hardness of this Linotype alloy is about 15..
Check Stock

Bullseye Metals 1/4 .250 Steel Plate 6\ x 12\ Flat Bar Mild Steel!

  • Knife Blade Steel Annealed and Ready for Stock Removal / Forging / Grinding / Sanding READY! 3-Pack.
  • 1095 is the Highest of the Carbon Grades Delivers Excellent Heat Treat Results! Perfect for Blades, Knives, Hand Tools, Shims, Etc...
  • Material Is Low Phosphorus, Low Sulfer, Calcium Treated To Enhance Internal Cleanliness In The As Rolled Condition..
  • (Hardness As Rolled: Rockwell C 15-45 Hardness) (Hardness Annealed: Rockwell B 95 Max).
Check Stock

Shark Corp 21-2225 10-Inch Prybar and Nail Puller

  • Forged heat-treated Cr-V alloy. Ends are tempered to Rockwell 50-52 hardness.
  • Nail puller end (Rockwell 50-52 hardness) bites into head/headless hardened nails.
  • Curved thin blade easily prys into tight spots and lifts molding with very little damage.
  • Back of the puller doubles as a striking surface.
Check Stock

ArmourLite Field Series Tritium Mens Watch - 42mm - Black Dial White Numbers - Shatterproof Armourglass Black Polyurethane

  • Shatterproof Armourglass (hardness rating of 6,000 Vickers).
Check Stock

Magnetic Switch, inductive, pnp Without Connector Cable Length 5m

  • Pack of 4 Track-Mount Overhead Door Magnetic Contact Switches.
  • Used for overhead doors in both industrial and residential situations where a wide gap is present.
  • Adjustable to fit most door-channel widths.
  • 36" (91cm) Wire leads enclosed in armored cable.
  • Contact Type: SPST, iridium-plated to have a high melting point and Vickers hardness for higher power handling and longer expected life.
Check Stock