Reviews Brazing Welding Rods

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
Check Stock

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

  • MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....
Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

Fox Alloy 20pcs Copper Brazing Rods BCuP-2 (5/64\) 2mm Phosphor Round Self Fluxing Copper Welding Rods Sticks TIG Arc Pipes for Air Conditioner Refrigerators

  • Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod.
  • Standard: The copper welding rods kit conforms to AWS A5.8.
  • Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The stick TIG welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions..
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

100 Pieces Flux Core Aluminum Rods Low Temperature Easy Melt Aluminum Welding Rods Welding Sticks

  • NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to....
  • HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
  • PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high....
  • WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and....
  • AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..
Check Stock

50 Pieces Flux Core Aluminum Rods Low Temperature Easy Melt Aluminum Welding Rods Welding Sticks

  • NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to use..
  • HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
  • PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity..
  • WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals..
  • AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..
Check Stock

100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)

  • Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
  • High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
  • Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
  • Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily： Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..
Check Stock

100Pcs Flux Core Welding Wire Aluminum Welding Rods 550℃/1022℉ Aluminum Brazing Rods Solution Welding Flux-Cored Rods for Samll Projects (1/16''x13'')

  • ONLY FOR WELDING ALUMINUM - The Aluminum welding flux-cored rods are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good forgeability & good corrosion resistance..
  • NO SOLDER POWDER NEEDED - The aluminum brazing rods don't need to use other flux powder while repairing aluminum..
  • HIGH QUALITY MATERIAL - The low temperature aluminum welding rods are made of premium nontoxic, odorless and durable aluminum..
  • APPLICATION - The flux core welding rods are used for welding and filling material for pure aluminum small projects, connection with aluminum bus and guide rod of electrolytic aluminum plant and electric power, chemistry and so on. The melting piont of solution welding flux-cored rods is 550℃(1022℉) ..
  • WARRANTY -- guangfan provide this product have 3-month warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..
Check Stock

40 Pcs Brazing Rods Solid Brass Rods Round Brass Stock Pin Brass Brazing Rods Brass Knife Pins Brass Bar Stock for DIY Craft Drift Punches Knife Handle Lathe 2 mm in Diameter 9.85 Inches in Length

  • Sufficient Quantity to Use: the package comes with 40 pieces of brass rods for knife handles, enough to satisfy your crafting or repairing demands, bringing you much convenience.
  • Appropriate Size for Processing: designed with a length of approx. 25 cm/ 9.85 inches and a diameter of approx. 2 mm/ 0.08 inches, the knife making handle pins are suitable for you to grip, store and carry around.
  • Easy for Welding: the brazing rod is an ideal material for you to do welding work, such as sculpture welding, model welding, circuit board welding and so on, whose melting point is 2190 degrees Fahrenheit, serving as a nice helper for you.
  • Satisfactory Practicality in Daily Life: there are multiple ways for you to apply the brass rods, for example, you can use them to embellish your model planes, model boats, wood crafts, knife handles and more, to make them full of your own style.
  • Reliable Workmanship for Lasting Service: mainly made of quality brass, the brass brazing rods are compact and stable in structure, with smooth surfaces and edges, not easy to deform or rust, able to stay vivid for a long time.
Check Stock

Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece

  • 2 pack, nickel silver brazing rod, 85,000 psi tensile strength, 1680 degree to 1750 degree working temperature.
  • Nickel-silver flux coated brazing/welding rods perfect for repairing bicycles, metal furniture, railings, and radiators.
  • Used in joining carbon and alloy steels as well as non-ferrous materials.
Check Stock