Reviews Brazing Filler Metal

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

Diablo D1260CF 12-inch Steel Demon 60T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

Mark of the Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are "Hot work" compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

SÜA - RBCuZn-C - Low-Fuming Bronze Brazing Rod - Flux Coated - 18 x 1/16 - 1/2 Lb - 24 Rods

  • LFBF (Fluxcoated low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as....
  • A “must have” filler metal for every machine shop, LFBF is excellent for building up wearing surfaces or large areas where successive layers must....
  • READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
  • Available in different sizes: 1/16", 3/32"and 1/8". Rod Length: 18" for easier maneuverability while welding since flux coated rods cannot be bend.....
  • Available in different package weights: 1/2 Lb, 1 Lb, 2 Lb and 5 Lb - Choose rod diameter and package quantity from the menu..
Check Stock

J.W. Harris Company 40022 Stay-Silv White Brazing Flux

  • It is a powder flux formulated for brazing gold and silver..
  • Jar of welding powder brazing flux powder welding cast consumables jewelry weld repair supply.
  • There are 250 grams in this jar, which will definitely meet your needs..
  • The powder melts at 700 degree centigrade.​.
  • Brazing powder improves the weldability of metal in the process of high temperature welding..
Check Stock

Metal Blade Records 20th Anniversary Party: Live in Hollywood

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are "Hot work" compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

Diablo D1472CF 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are "Hot work" compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

Diablo D0842CF 8-inch Steel Demon 42T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

RBCuZn-C - LFB Bare Bronze Brazing Rod - 36 x 1/8 1 Lb

  • LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F).
  • A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added.
  • galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service.
  • READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
  • Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4".
  • Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb.
Check Stock

Diablo D1472CF 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade (Thrее Расk)

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
Check Stock

Warehouse of Tiffany Miyaka 6-light Metal 3-blade 29-inch Lighted Ceiling Fan with Remote (Optional Finishes)

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are "Hot work" compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Permatex 14600 Cold Weld Bonding Compound, Two 1 oz. Tubes , Black

  • 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing.
  • Repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper.
  • can be drilled, tapped, threaded, filed, sanded and painted once cured.
  • resists most automotive, shop and cleaning fluids.
  • Temperature Range: up to 300°F intermittent.
  • Suggested Applications: Aluminum, steel, brass, bronze, castings and stampings.
Check Stock