Reviews Brazed Carbide Cutter

ACTOOL 1-1/4\ Diameter × 2\ Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank

  • CARBIDE TIPPED CUTTER- Premium carbide is brazed for superior strength, durability and wear resistance. 1-15/16’’ Diameter x 2’’ Depth of Cut annular cutter include free Pilot Pin..
  • EFFICIENT & PRECISE- Cut holes in steel quickly, precisely and safely. It can cut holes in steel up to 10X faster than standard twist drill bits..
  • EXCELLETN DESIGN- Triple-Cut geometry provide efficient cutting, fast feed rate, less vibration, smooth hole surface and long tool life..
  • WIDELY USE- For smooth and easy cutting almost all types of steel, including materials that are extremely difficult to cut such as stainless steel, titanium, hardened steel and rail steel..
  • UNIVERSAL FIT- 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
Check Stock

IRWIN Tools MARATHON WeldTec Circular Saw Blade, 8-1/2-inch, 60T (4935204)

  • Laser cut plate with expansion control slots reduces warping and increases blade control.
  • Ring tensioned to maintain balance for straighter cuts.
  • The IRWIN Weld Tec Circular Saw Blade, Miter, is made stronger to last longer. This ultra-thin kerf blade features patented Weld Tec technology with carbide teeth that are welded not brazed and delivers the fastest cutting speed and increased durability when compared to previous IRWIN blades. Constructed with a heat-resistant, non-stick coating to reduce binding and gumming, these blades have laser-cut expansion slots to reduce warping and ring tensioned to maintain balance..
  • Carbide teeth are welded not brazed, resulting in stronger tooth bond, longer life, and durability..
  • UC2 carbide with sub-micro grain is 70% tougher than standard carbide, stays sharp longer, and offers best-in-class cut quality..
  • Carbide teeth are welded not brazed, resulting in 30% stronger tooth bond, longer life, and durability..
  • Innovative heat vents and expansion slots help make straighter cuts. Reinforced shoulder provides durability..
  • 6 tooth count blades are best for use with thickes....
Check Stock

PSI Woodworking LXPMSET Lathe Woodturning Ultra Carbide Chisel System

  • Multi-function carbide chisel system that uses a single handle with three interchangeable, replaceable carbide cutter profiles.
  • Includes: Chisel handle, 2" Radius Carbide Cutter (LXPMBS) and Carrier, 3/8" Round Carbide Cutter (LXPMBR) and Carrier, Diamond Carbide Cutter (LXPMBD) and Carrier, and all needed 3mm set screws.
  • Also includes: Magnetic Chip Deflector (LXPMCD), 3mm Allen Wrench, Nylon storage and carrying case, and instructions.
  • Tool length is 16" consisting of 11.5" handle and 4.5" blade.
  • Flat bottom blade ensures straight, level cut along tool rest.
  • Numbered edges on carbide cutters for consistent, reliable rotation.
Check Stock

8' x 80T 8-Inch 80 Tooth Carbide Tip Circular Saw Brush Cutter Trimmer Weed Eater Blade (2 Pack)

  • UNIVERSAL FIT. It fit either 1" (25.4 mm) or 20 mm arbor.
  • Carbide Tipped Trimmer Brushcutter Blades 8" diameter - 80 Teeth brazed-welded.
  • Carbide tipped blade is estimated to last about 10 times longer than plain steel.
  • More teeth create more aggregate cutting surfaces for longer lasting durability.
  • Made by CE certified Manufacturer. Package included: 2 pcs 8" 80T Carbide Tip blades w/ washer.
Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

  • OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
  • MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
  • INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
  • EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
  • TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..
Check Stock

IDEAL Electrical 36-311 TKO™ 4 Pcs Hole Cutter Kit – Carbide Hole Cutter Set Smooth Start Pilot Bit Carry Case

  • Superior Performance: TKO carbide tipped hole cutters provide the most precise and clean hole saw and knockout replacement in the industry with....
  • Precise Design: The hole saw cutter has ground carbide teeth made from high quality HSS producing clean, burr-free holes. The carbide cutter includes....
  • Smooth Cutting: The innovative design includes a SmoothStart pilot drill which guides the cutter to the surface, avoiding damage to the cutter and....
  • Convenient Usage: The carbide tipped cutting hole saw has an integrated arbor for solid rotation providing smooth accurate holes without chattering.....
  • Product Specifications: The TKO carbide tipped hole cutter kit is supplied with SmoothStart replacement tip, 7/8 in., 1 1/8 in. and 1 3/8 in. diameter....
Check Stock

Urbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
  • Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539....
Check Stock

6pcs Universal Carbide Oscillating Saw Blades HEMUNC Mixed Multitool Saw Blades Semicircle Triangular Finger Kit for Tile Grout Mortar Concrete Masonry

  • ✔The Oscillating Multitool Carbide Grit Finger Rasp Blade with Universal Fit System is a great multitool blade attachment for hand....
  • ✔The Oscillating Multitool Universal Fit Carbide Grit Semicircle Blade allows you to cut into concrete and defective tile joints with its brazed....
  • ✔ The oscillating Multitool Triangle Carbide Rasp is ideal for cutting trim and other grinding projects. The triangle edge makes it easy to sand in....
  • ✔ Our carbide oscillating saw blades are compatible with many oscillating tools including Fein Multimaster, Bosch, Dremel, Ryobi, Hitachi, Chicago,....
  • ✔ There are 3 types and 6pcs carbide oscillating tool blades, which are suitable for cutting and grinding objects like concrete, grout, tile,....
Check Stock

Groovemaster Carbide Tungsten Steel Replacement Cutter Head for Golf Club Groove Sharpeners Made by Specialty Golf Products

  • GROOVEMASTER TUNGSTEN CARBIDE STEEL CUTTER HEAD is the replacement cutter head for ANY 6 Head Groove Sharpener made by Specialty Golf Products..
  • REPLACE EXISTING CUTTER HEAD EASILY using existing screw using standard and commonly found 2.5mm hex wrench as in image shown (wrench not provided). Takes less than 2 minutes to upgrade..
  • CLEANS, DEEPENS AND RESTORES WORN GROOVES with the best accuracy of any golf club groove tool on the market. Premium cutter head, made of tungsten carbide steel, cuts through standard steel, titanium and even maraging steel with unmatched ease..
  • MEASURING A HARDNESS OF 65 ON THE ROCKWELL SCALE, this premium cutter head is made from high grade precision tool vacuum heat-treated carbide tungsten steel. The Groovemaster Carbide Cutter Head is the ultimate solution for maximum durability and re-grooving effectiveness..
  • PRECISION GROUND AND ENGINEERED TO EXACTING TOLERANCES to ensure that it does not compromise USGA rules regarding groove width and depth..
Check Stock

Pro Grind Sharpening System For Lathe Turning Tools, Chisels, Skews, Gouges, Bowl Gouges, Spindle Gouges and More. Includes the Multi-Grind Jig for Gouges, Slotted Platform and Tool Rest

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning, the results can be undesirable. With the Savannah Carbide Mini Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and with the flat bottom bars on each tool you’ll be able to easily turn most any type of project!.
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting edge. Carbide cutters will stay sharper longer when compared to standard turning tools. However, once needed, the cutters are replaceable. This set includes 2 of each cutter style and extra screws..
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a shearing action as opposed to the traditional cutting method of standard turning tools. The shearing action of this type of turning produces much cleaner cuts and is easier than using standard turning tools..
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long a....
Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock

Lenox Tools 1211932DGHS 32 Diamond Grit Hole Saw 2-Inch or 50.8mm red

  • LENOX Diamond hole saw has a brazed diamond edge for more holes in tile and stone.
  • Diamond-tip hole saw has a durable, robust design for greater versatility in tough applications.
  • Diamond-tipped hole saw cuts holes in less time than carbide-grit or carbide-tipped hole saws.
  • Round holes make removing plugs faster and easier.
  • Uses a 2L, 3L, 6L or 7L standard arbor or a 2L or 6L SNAP-BACK arbor.
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/2\ Shank 2\ Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by BINSTAK

  • 3-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock