Reviews Brass Spring Check Valve

EZ-FLO 20405LF Brass In-Line Check Valve

  • ✅DESIGN- The valve features a stainless steel to prevent water from traveling back to the source to avoid contamination..
  • ✅QUALITY- Made of from heavy-duty brass for extra durability and strength during every use..
  • ✅FUNCTIONALITY- The working pressure of the check valve is 200 PSI with a minimum of 5 PSI to open the spring..
  • ✅MEASUREMENT- The in-line check valve is equipped with a 1 inch female iron pipe (FIP) threaded connection for a maintenance free operation..
  • ✅SAFETY- The EZ-FLO in-line check valve is compliant with the Safe Drinking Water Act..
Check Stock

MaxSen Deck Mount Single Hole Double Handle Pull Out Spray Commercial Pre Rinse Restaurant Kitchen Faucet (MS-5801A)

  • 【Single Hole Deck Mount Commercial Faucet】Heavy Duty Brass Faucet Body..
  • 【UPGRADE! No-screw design Spay Valve】1.42GPM (5.38LPM) Water Saving Spray Valve..
  • 【Brass Kitchen Faucet】Brass Compression Cartridges with spring check to prevent cross flow.
  • 【Easy Installed Faucet】Built-in water sealing washer , no need to apply PTFE tape..
  • 【Kitchen Sink Faucet with Sprayer】Durable Pressure and Heat Resistant Stainless Steel Hose With Food Grade Polyurethane Inner Tube..
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • 1. DUAL GAUGE REGULATOR: This unit weighs about 3 pounds and includes 2 rubber protective covers. It always tell you working pressure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
  • 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from....
Check Stock

GAS Air Compressor Pilot check valve unloader valve combo 145-175 NG7

  • 【Versatile】This 3-Port Brass Female Threaded Air Compressor Check Valve excellent replacement for the old or broken check valve of your air compressor.
  • 【Easy to install】Easy to install with the thread connecting ends, the three male thread connectors are respectively for tube connecting, air pressure tank and compressor piston pump.
  • 【Package Content】 1 x Air Compressor Check Valve.
  • 10mm Female Thread Tube Connector Air Compressor Check Valve, Male Thread : 16mm Hex Head Size : 18mm.
  • 【After-sale Service】Each Compressor Check Valve is quality checked, we provide 30-day money back service or exchange for customers, just feel Free to contact us if you have any problem with the product, we will solve for you within 12 Hours.
Check Stock

Maxsen Deck Mounted Type Commercial Kitchen Sink Faucet Pre Rinse with Add-On Spout for Food Service Commercial Kitchens Restaurant Hotel Application Tap MS-5801BDP

  • 【Heavy Duty Brass Faucet】Brass Compression Cartridges with spring check.
  • 【UPGRADE Spray Valve】Powerful Jet Spray, 1.42GPM (5.38LPM) Water Saving Spray Valve..
  • 【Easy Installation】 Built-in water sealing washer , no need to apply PTFE tape..
  • 【Commercial SINGLE HOLE Faucet】47'' (1193mm) in Height for Commercial or Home Kitchen.
  • 【12“ (305mm) Add on Spout 】304 Stainless steel spout and Pre-rinse sprayer. The faucet comes with a 12 inch long touch spout. With the high....
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

NIBCO F910B-LF Silent Check Valve Lead-Free* Class 125 Flanged Bronze Seat 4

  • The NIBCO lead-free cast iron sliding disc silent check valve is spring actuated with renewable cast bronze seat and bronze disc.
  • The spring return reduces noise for quiet operation.
  • The wafer style check valve features a flanged wafer body style to fit between standard flanges.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock

Watkins Replacement Water Check Valve for Hot Springs Spa, 3/4" - 35233

  • This 3/4″ water check valve is installed in the inlet side of the circulation pumps plumbing to prevent the back flow of water through the circulation pump once the jet pump is activated.
  • Works on Tiger River Spas, Hot Spring Spas, and Limelight Spas..
  • All water check valves have arrows stamped on the outside to indicate the direction of flow which should be pointer towards the circulation pump..
  • Troubling Shooting: The symptoms of a non-operative check valve are.
  • * Water Leak – If water is leaking from around the check valve, it should be replaced. * Rattling – A rattling check valve indicates that water is not being allowed to flow properly past/ through the check valve. * Verify the check valve is installed with the flow in the correct direction. * Heater High-Limit Tripping – Poor water flow through the check valve could lead to heater high-limit tripping. Ensure the check valve is n.
Check Stock

NIBCO F910B-LF Silent Check Valve Lead-Free* Class 125 Flanged Bronze Seat 2-1/2

  • The NIBCO lead-free cast iron sliding disc silent check valve is spring actuated with renewable cast bronze seat and bronze disc.
  • The spring return reduces noise for quiet operation.
  • The wafer style check valve features a flanged wafer body style to fit between standard flanges.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
  • Steady, regular drop indicates that the valve is held open, burnt, or chipped.
  • Wide pressure fluctuation at high speeds indicates a weak valve spring.
  • Steady drop to zero pressure indicates a choked muffler.
  • EASY TO USE: Assembly and operating instruction manual included.
  • Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSIG (0-0.7 kg/cm²) pressure.
  • EASY STORAGE: Heavy-duty 12.75” x 2.25” x 7.25” inch (32.4cm x 5.7cm x 18.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4”x18 male to 1/8”-27 female brass adapter, (1) 1/8”-27 male to 7/32” ....
Check Stock

Harvard Boshart 1 x 11 BRASS Tank Tee Kit installation package with BALL VALVE and CHECK VALVE Water Well Pressure Tank SQUARE D 4060 FSG2 pressure switch NO LEAD

  • (1) 1" x 11" Tank Tee(SOLID BRASS, NO LEAD CONSTRUCTION).
  • (1) Square D 30-50 Pressure switch, 40-60 available in other listing.
  • (1) 1/2" 100 psi Brass Pressure Relief Valve.
  • (1) Roll of 3/4" x 520" 3.5 mils Thread tape.
Check Stock

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock

NIBCO - NLN10XK W910B-LF/W960B-LF Silent Wafer Check Valve Lead-Free Class 125 Iron Body Bronze Seat and Disc 6

  • The NIBCO lead-free wafer style silent check valve is spring actuated with renewable bronze seat and disc.
  • The spring return reduces noise for quiet operation.
  • Check valves prevent backflow by automatically closing when fluid reverses direction.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0. 25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock