Reviews Brass Reducing Bushings

T TANYA HARDWARE 1/8 x 1/4 Brass Hex Bushing Female Pipe x Male Pipe NPT Pack of 10

  • Hex bushing for connecting two pipes with different diameters.
  • Male NPT threads on one end and female NPT threads on the other for connecting pipes with different ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Brass Pipe Reducing Bushings are designed for use in water, oil, natural gas, and steam applications..
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Forney 72396 Reducing Bushing Adapters for 1-Inch Thick Bench Grinding Wheels

  • Reducing bushing adapter for 1-Inch thick wheels.
Check Stock

DCT Brass Router Template Guides Bushing 10-Piece Set & Black Carrying Case - Porter-Cable Guide Bushings 5/16 to 1in

  • PERFECTLY MATCHED MULTIPLES: The DCT Brass Router Template Guides Bushing 8-Piece Set & 2 BONUS Lock Nuts – Porter-Cable Guide Bushings 5/16” to 1” Inch includes a wide range of porter cable style bushing sizes designed to allow full flexibility between router bit cutter and various templates.
  • COMMON SIZES: Standard bushings fit all routers with a 1-3/16-inch or 1-1/4-inch base plate (fits as long as the opening at the base of the router is 1-3/16-inches).
  • Fits 1/4-inch and thinner template material.
  • Each of the 8 guides have the following outside and inside diameters (OD/ID) – 5/16-inch OD 1/4-inch ID.
  • IMPROVED CONSTRUCTION: Constructed from solid brass to resist vibrating loose and resist water and moisture.
  • When inferior steel bushings touch a rotating router bit (i.e. tapered dovetail bit), sparks fly and the router bit will likely be ruined.
  • These solid brass bushings will prevent damage to the bit and the bushings themselves.
  • EASY STORAGE: Heavy-duty 8.5” x 2” x 6.5” (21.6cm x 5.1cm x 16.5cm) plastic blow-molded....
Check Stock

uxcell Sleeve Bearings 5mmx8mmx10mm Chrome Steel Oilless Bushing 6pcs

  • Size - Bore Diameter: 5mm, Outer Diameter: 8mm, Length: 10mm.
  • Material - Chrome steel, smooth surface, high hardness, high load capacity, wear-resistant.
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Steel bushings are suitable for high load and high-speed applications. Sleeve bearings are used in a wide variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

XMark Olympic Bar Barbell LUMBERJACK EZ Curl Bar Weight Bar Black Manganese 25 mm Brass Bushings Chrome Sleeves Medium Knurl 400 lb Capacity

  • The design of the XMark LUMBERJACK-CURL bar places your arms in a more natural position, therefore promoting comfort and reducing injuries when....
  • The black manganese phosphate coating on the 25mm grip shaft of the LUMBERJACK-CURL bar provides unbeatable hardness and abrasion protection.
  • This curl bar features chrome sleeves with brass bushings and a no-maintenance snap ring lock system as compared to other Olympic bars with bolts....
  • All it takes to protect your investment is a couple of minutes and wiping down your bar regularly with a light coat of a 3-in-1 oil.
  • XMark, a trusted brand in strength training equipment, is found in schools, commercial gyms and home gyms across the United States. Long-lasting....
Check Stock

XMark Olympic Bar Barbell CROWBAR EZ Curl Bar Weight Bar Black Manganese 28 mm Brass Bushings Chrome Sleeves Medium Knurl 400 lb Capacity

  • The design of the XMark CROWBAR-CURL bar places your arms in a more natural position, therefore promoting comfort and reducing injuries when....
  • The black manganese phosphate coating on the 28mm grip shaft of the CROWBAR-CuRL bar provides unbeatable hardness and abrasion protection.
  • This curl bar features chrome sleeves with brass bushings and a no-maintenance snap ring lock system as compared to other Olympic bars with bolts....
  • All it takes to protect your investment is a couple of minutes and wiping down your bar regularly with a light coat of a 3-in-1 oil.
  • XMark, a trusted brand in strength training equipment, is found in schools, commercial gyms and home gyms across the United States. Long-lasting....
Check Stock

uxcell Sleeve Bearings 10mm Bore 14mm OD 15mm Length Sintered Iron Self-Lubricating Bushings 12pcs

  • Size - Bore Diameter: 10mm, Outside Diameter: 14mm, Length: 15mm.
  • Material - Sintered Iron. They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Iron bushings are most for applications with high load and lower speeds. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 8mm Bore x 12mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 3pcs

  • Bore: 8mm, Outside Diameter: 12mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 10mm Bore x 16mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 6pcs

  • Bore: 10mm, Outside Diameter: 16mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 6mm Bore x 10mm OD x 6mm Long Self-Lubricating Sintered Bronze Bushings 10pcs

  • Bore: 6mm, Outside Diameter: 10mm, Length: 6mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

Orangatang Knuckles Soft Longboard Skateboard Truck Bushings (Orange, Set of 4)

  • LIVELY BUSHINGS – Crafted for quick turning response and smooth edge-to-edge transitions, Orangatang Knuckles are the ultimate high-energy bushing upgrade for carving, pumping, dancing, and freestyle longboarding..
  • RESPONSIVE DESIGN – Two unique shapes for highly responsive and customizable turning. Compatible with most trucks. The insert barrel features a small “step” to fill the gap between the kingpin and the hole of the hanger, reducing play in the assembly for a more precise response. The gumdrop is a smooth and subtle blend between a barrel and the more traditional cone shape, providing enhanced agility. The rounded edge allows for ultra-smooth turn initiation and improved interface with the washers..
  • HIGH-REBOUND FORMULA – Poured in our extremely high-rebound Randy Thane formula, ideal for responsive, energetic turning..
  • THE PERFECT SET – Pack contains two insert barrel bushings, two gumdrop bushings, two large cup washers, and two small cup washers..
  • SOFT – Great for tight turns and maximum agility..
Check Stock

DEWALT Plunge Base for Compact Router (DNP612)

  • Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking.
  • Precision machined brass bushings and case-hardened steel guide rods provide a smooth and accurate plunge stroke.
  • Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings.
  • Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control.
  • Heavy-duty, precision machined, die-cast aluminum base and motor housing for durability and low tool weight.
Check Stock

Lyman, Brass Smith Case Trim Xpress Case Trimmer

  • Lyman’S Case Trim Xpress Gives Rifle Reloaders The Speed And Accuracy That They Have Been Looking For When Trimming Cases..
  • The Unit Has Its Own Power Source, And A Strong Variable Speed Motor, So There Is No Need To Use Power Drills Or Purchase Separate Motors..
  • By Using Bushings That Contact On The Shoulder Of Bottle Neck Type Cases, The Case Trim Xpress Will Quickly And Cleanly Trim Your Brass By Simply Pushing The Case Against The Long-Lasting Carbide Cutter..
  • The Trimmer Comes With 10 Bushings Designed To Fit Most Popular Bottleneck Rifle Cases.
Check Stock