Reviews Brass Male Tee

Stanbroil Propane Brass 4 Port Tee kit with 5ft and 12ft Hoses Allows for Connection Between Auxiliary Propane Cylinder

  • Premium Quality: The kit is made of high-quality rubber and brass, more durable, gives you new flexibility..
  • Propane Brass Tee: 1/2” NPT Female Thread x Excess Flow Soft Nose POL x 1"-20 Male Throwaway Cylinder Thread x 1/4” female inverted flare..
  • 5' auxiliary tank hose: Soft-nose male POL x 1/4" inverted male flare..
  • 12' additional appliance hose: 1" male x 1" female swivel -20 throwaway cylinder thread..
  • Widely Used: Easy to install, Very safe and convenient. Great for camping, having an outdoor cook, grills, heater, A must have if you are a RVer..
Check Stock

SUNGATOR Angle Stop Add-A-Tee Valve, 3/8

  • Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
  • Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
  • Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
  • Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).
Check Stock

Uniweld Products RHP1500 Uni-Weld Nitrogen Regulator 1/4 Fnpt

  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Nitrogen Regulator, Delivery Pressure 0-400 PSI.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Check Stock

3/8 Compression Tee Valve, Standard Angle Tee Valve, 2 PCS Brass Tee Adapter 3 Way Valve Compression 3/8'' Inlet and 3/8'' Outlet, Lead Free Brass Angle Stop Valve, 3/8 Add-A-Tee Valve Connector

  • 【Lead Free Brass】Heath and environment friendly material. Lead free brass tee adapter 3 way valve compression 3/8″ inlet and 3/8″ outlet..
  • 【Advantage】Brass for corrosion resistance, have a longer using life than iron and iron galvanized products, high temperature ductility and low magnetic permeability. Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • 【Multipurpose & Easy Installation】Used for adding to an outlet water shut off valve with a washer, toilet bidet, faucet and sprayer hose etc..
  • 【Size】US standard. Thread size is 3/8″ ( also name 9/16″ ) female thread, 3/8″ male thread. Rubber gasket included..
  • 【Package Included】3/8 Inch lead free add-a-tee valve ( 2 pcs )..
Check Stock

2PCS Quick Coupler Access Tee, 1\\/4'' Valves Core Tee Adapter with Swivel Connector, Fits for Gauge Deep Vacuum Pump Manifold

  • 【WELL- DESIGNed TEE CONNECTOR 】This Quick coupler access Tee with 1/4’’male flare connector is designed to hook up a vacuum gauge/micron gauge or something else.And it can ensure there is no leaking. You can use it with security..
  • 【PREMIUM QUALITY】 This refrigerant tee adapter valves core is made of high quality Brass with durable construction , can provide you with long-lasting usage..
  • 【EASY to INSTALL】 The HAVC tee adapter is easy to operate and install with strong sealing for durability and safety.You can remove the valve core reliably..
  • 【ACCURATE DIMENSION】 One of end is Female 1/4" SAE flare FFL with valve core depressor built-in. Another two ends 1/4" SAE male flare MFL..
  • 【1 YEAR WARRANTY】 Once order this 1/4 inch tee adapter c/w valve core from us, you will enjoy 12 months warranty. If there are any questions, please feel free to contact us..
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection Gauges

  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Nitrogen Regulator, Delivery Pressure 0-4000 PSI..
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Check Stock

Uniweld RHP800 Nitrogen Regulator with 0-800 psi Delivery Pressure 2

  • Nitrogen Regulator, Delivery Pressure 0-800 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

ATPEAM Nitrogen Regulator with 0-800 PSI Delivery Pressure, CGA580 Inlet Connection with 1/4-Inch Male Flare Outlet Connection

  • Durable Brass Construction: Regulator body is constructed of forged brass with all brass connections and components..
  • Accurate Reading: This regulator features two clear, easy-to-read gauges. The side gauge measures the nitrogen pressure in the ac system and displays between 0 and 800 PSI. The top gauge has a 0-4000PSI display that lets you know how much nirtrogen gas is left inside the tank, so you won't have to worry about running out unexpectedly..
  • Reliable Connections: Featuring a CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection designed for easy installation. Fits HVAC Charging Hoses for Purging and Pressure Testing..
  • Large T-Style Handle: Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling..
  • Package includes:1 x Nitrogen Regulator+1 x T-handle. For its use with inert gases like Nitrogen, Argon, and Helium. Whether you’re just purging HVAC systems or doing tests, this Nitrogen Regulator will fulfill all of your work needs..
Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

  • Nitrogen Regulator, Delivery Pressure 0-400 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

Uniweld RHP500 Nitrogen Regulator with 0-500 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

  • Nitrogen Regulator, Delivery Pressure 0-500 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

RX WELD Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection Gauges With 6.6Ft Refrigeration Hose

  • PRESSURE- Input: 0-4000PSI. Output: adjustable - 0-400PSI.
  • CGA580 Inlet Connection, 1/4" SAE Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Regulator with Refrigeration Hose, 65 inches Long, 600 PSI Max Pressure and 1/4" SAE Female Flare Connections.Great for HVAC Purging / Inertization / Pressure Tests / Leakage Tests / Brazing / Soldering.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Check Stock

Brass Barb T Fittings LIONMAX 3 Way Union Barb Tee Fitting 3/16 x 3/16 x 3/16 ID Hose Barb 3 PCS for Water/Fuel/Air

  • 【SOLID BRASS MATERIAL】3/16'' × 3/16'' × 3/16'' ID Hose barb tee fitting is made of brass. Strong and durable, not easy to rust and corrode. NOTE: Brass barb tee fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Brass barb 3 way union fitting has strong temperature resistance and good pressure resistance. So barb T fitting is often used for water, fuel, oil delivery..
  • 【SPECIFICATION】3/16'' ID Hose barb tee fitting is suitable for 3/16 inch ID hose. The package contains brass barb tee 3 PCS..
  • 【WIDE APPLICATION】Barb tee is suitable for pipe repair. Various hoses can be connected to this 3/16 inch ID hose barb tee fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This hose barbed T fitting is smooth overall without burrs. Size meets the standard. The strong barb make the 3 way union fitting not easy to leak during the connection process..
Check Stock