Reviews Brass Forged Ball Valve

EZ-FLUID 1-1/2 NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle 1-Pack

  • 1-1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
  • Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
  • 1-1/2" NPT Threaded IPS Lead Free Brass Water Cut off Ball Valve.
  • Size: 1-1/2" NPT IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
  • IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.
Check Stock

Lead-Free Forged Brass Air Compressor In-Line Ball Shut Off Valve, Quarter Turn, 1/4\ Male NPT (MNPT) X 1/4\ Female NPT (FNPT) Qty: 1

  • Forged for added strength and durability. Forged brass is stronger and more expensive than cast brass..
  • For your health and safety, this fitting is made of lead-free brass which contains less than 0.25% lead. The ball inside the valve is made of chrome plated lead-free brass. Seal materials are PTFE plastic and NBR rubber..
  • 1/4" Male NPT (MNPT) X 1/4" Female NPT (FNPT) connections. High-capacity full-port design reduces pressure drop. Quarter-turn operation with a long handle makes this ball shut-off valve very easy to operate. Locknut resists loosening under vibration..
  • Suitable for compressed air, water, and oil. Able to control flow in either direction. Pressure rating: 200 psi..
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • ...ure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
  • 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
  • 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an esse....
Check Stock

MIDLINE VALVE 822C234 Lead Free Full Port Forged Brass Ball Valve with Solder Cups, 1/2''

  • Forged Brass construction with Chrome Plated Brass ball.
  • With 1/2 inch solder cups for use with Copper pipes.
  • Upc approved lead free product for 150 psi steam and 600 psi wog.
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit

  • ...and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank colla....
Check Stock

Kegco HBK199S-2 Keg Dispenser

  • ...s you what's left in the CO2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching y....
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank

  • ...o display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank colla....
Check Stock

Nipple, 2 X 6 In

  • Price For: Each Stem Type: Blowout Proof Seat Material: PTFE Standards: UL, CSA Body Material: Brass Ball Valve Basic Body Material: Brass Port: Full Ball Valve Product Group: Manual Valve Structure: 2-Piece Handle Material: Steel with Corrosion Resistant Plating Item: Ball Valve Body Style: Inline Ball Material: Chrome Plated Brass Handle Type: Lever.
  • Temp. Range: 0 Degrees to 400 Degrees F Stem Material: Brass Max. Pressure: 600 psi CWP Pipe Size: 1/2" Tube Size: 1/2" Connection Type: Sweat x Sweat Features: General Purpose Country of Origin (subject to change): China.
Check Stock

Kegco bf ebdck-nt Conversion Kit

  • .... The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6" x 4" door mount drip tray's clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you're done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished ....
Check Stock

3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve, Clean Brass, 3/4 Inch Service Installation Valve for rheem,rinai,ecosmart,navien,noritz,takagi,bosch.

  • ...ion】: The components are certified lead free. Meets all federal & state standards for lead levels in drinking water system components. You can also find the CSA certification on the pressure relief valve to prove its authenticity..
  • 【Excellent Integrated Design】: Thickened brass body, gravity forging, one-piece forged brass body can effectively prevent any leakage or dripping, the main isolation valve group has passed a leak-free test before leaving the factory ,and can be used for a long time..
  • 【Quality Commitment】: 100% full refund. If you don't like the product or it is not the product you want, please don't rush to leave a review, contact us as soon as possible, and we will process a return or a full refund for you. Your satisfaction is our greatest pursuit..
Check Stock

Eastman Quarter-Turn Brass Angle Stop Valve, 1/2 inch FIP x 3/8 inch OD Comp, Chrome, 10733LF

  • ✅DESIGN- Forged brass construction which provides strength and durability eliminating leaks. The chrome-plated finish gives it a modern look..
  • ✅QUALITY- The Teflon seats of the valve resist corrosion and provide a watertight seal. Chrome-plated finish resists corrosion..
  • ✅EASY TO USE- Brass ball mechanism provides ease of operation. It has a removable oval handle which provides easy grip..
  • ✅FUNCTIONALITY-With 1/4 turn, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home..
  • ✅MEASUREMENT- Professional Series Quarter-Turn Angle Stop Valve has a 1/2-inch Iron Pipe Inlet (FIP) x 3/8-inch OD Compression Outlet..
Check Stock

BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank

  • ...u will not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI..
  • 2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve.
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
  • 4. METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for lo....
Check Stock

Upgraded Replacement for Honeywell Furnace Gas Valve VR8305H4013

  • Valves are forged brass and cnc machined with a zinc alloy handle.
  • 1/2-inch female internal pipe thread x 1/2-inch female internal pipe thread.
  • Rated for temperatures from 32 degrees f to 125 degrees f and max pressures of 1/2 pounds per square inch gauge.
Check Stock