Reviews Brass Fastener Fitting

General Tools 1265 Snap Fastener Kit with 6 Fasteners

  • This snap fastener kit comes with 6 fasteners and a 2-piece setting tool to connect the fastener to the article of clothing or leather.
  • Poppers are usually used to perform the same functions as buttons as clothing clasps, jean buttons, leather clasps and the sort.
  • The snap fastener setting tool features a knurled body for greater comfort and safety.
  • Snaps are made of brass and nickel-plated for added durability.
  • Use snaps to repair or replace broken fasteners for coats, boat covers, tents, canvas, tarpaulins, awnings, sailcloth, lawn furniture and pool covers.
  • Refills available through General Tools and Instruments 1266 Snap Fastener Refills, 6 Fastener Sets.
Check Stock

Child Gohan Costume X-Large (16-18)

  • Purple sleeveless jumpsuit w/ elastic in legs and shoulders for fitting.
  • Blue armband w/ Hook and Loop fastener fasteners.
  • Blue waist sash w/ Hook and Loop fastener fastener.
Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

LIONMAX Barb Splicer Mender 4 PCS, Brass Barb Union Hose Fittings, 5/16 Inch to 5/16 Inch Barb Hose ID, with 8 Hose Clamps, for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

220V Self Priming Water Pump Pressure Switch Automatic Pressure Controller Black

  • What you will get: you will receive 1 piece of 2 inch, 1/4 inch NPT water pump pressure gauge, 1 piece of 1/4 inch NPT female thread 1/2 inch male threaded brass fitting and 1 piece of tape, a total of 3 accessories for swimming pool pressure gauges, they are indispensable accessories for swimming pools and other equipment.
  • Clear and accurate reading: this water pump pressure gauge has a clear surface and accurate reading, it can provide accurate readings in the range of 1 to 100 psi and 0 to 7 bar for pumps, it is equipped with a 2 inch dial, is a practical tool for detecting water pressure.
  • Reliable material: this pump pressure gauge and 1/4 inch NPT internal thread x 1/2 inch external thread joint are made of brass, not easy to wear, comfortable texture, durable, the surface of this gauge is made of plastic which allows you to see clearly to the reading and pressure range, and use the tape when installing the pressure gauge to prevent leakage.
  • Brass fitting size: NPT thread size is the correct size and does not represent the actual diameter, 1/4 inch NPT internal thread x 1/2 inch external thread brass fitting can be applied to connect the pressure gauge, it is ideal to use the tape to make installation more stable.
Check Stock

StartFine Fiberglass Fish Tape Cable Rods Fish Stick Wire Running Fish Tape Kit Connectable Cable Puller Pull Push Electrical Wire Rods with Hook and Eye Noodler

  • ** [Material]: The Fiberglass rods are made of high quality non-conductive sturdy fiberglass with solid brass connectors & eye/hook ends, and a bendable BRASS Spring. White rods are highly visible, Sturdy and durable, brass terminal, spring and hook accessory will never rust. The fiberglass is hard, DO NOT bend by force while using..
  • **[Fish Tape SPECS]: Fiberglass Rod diameter is 3/16". 17 inch*10 rods = 14ft. Total 10 pcs, 17”/pc. The Fiberglas fish tape can be extended up to 17' by combining with brass connectors..
  • **[DESIGN]: Highly visible white rods simply screw together with special threaded ends extending the tool up to 14 Ft. with an high qualified brass spring that flexes to any angle and a hook and eye attachment making pulling and pushing cables a breeze..
  • *[Fish Tape Fastener]: Easy to use through corner and the wire knot will not lock in corner. Fish tape fastener is used to help fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly..
  • **[Packing Tube]: The Fiberglas Fish Tape Cable Rods Come with plastic storage case, easy to carry and store, PC tube is solid and sturdy..
Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

  • Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
  • Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
  • When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
  • Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..
Check Stock

Bonbo Fuel Gas Cap with Brass Hose for Honda EU2200i EU1000i EU2000i EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT Generators, Upgrade Extended Run (Red)

  • Application - This fuel gas cap can be widely used in Honda EU2200i EU1000i, EU2000i, EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT generators..
  • Function - As a fixed connection between plastic or rubber hose and pipe, this gas cap with brass hose fitting helps you add gasoline into generator within a safe distance, ensuring seal tight and no leakage..
  • Design - The brass hose fitting has a 1/4" male end for connecting to threaded pipe, conforming to National Pipe Thread (NPT) standard and the barbed fitting for a hose is equipped with a 1/4" inside diameter..
  • Material - The gas cap is made of premium CNC billet aluminum, finishing with stylish anodized red coat. And the hose fitting is made of top high quality and wear resistance brass, performing well even under extreme conditions..
  • Satisfaction Guarantee - Bonbo aims to provide best products and services for our customers. If you receive broken or defective gas cap and brass hose fitting, please contact us any time, we will compensate you with 1 year warranty or 30 days full refund..
Check Stock

Cole-Parmer-3121270 Compression Ferrule and Nut Assembly, for 1/4\ OD, Brass

  • This Joywayus compression fitting is made of brass..
  • Connects to 4mm copper,brass,aluminum,or plastic tubing..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
Check Stock

Brass Flat Washer - 7/16\ (.500 ID x 1.125 OD x .081 Thick) Qty-1,000

  • A flat washer is a round outer diameter thin ring with a center hole (inner diameter) punched to a size just larger than a bolt or screw. Flat washers are normally used to distribute loads of threaded bolts, screws and nuts evenly as the fastener is tightened. While there are many types of flat washers standard are the most commonly used..
  • Brass flat washers are made of Dezincification resistant (DZR or DR) brass.
  • Normal brass flat washers do not meet this standard and have high corrosion risk.
  • Brass flat washers are suitable for high water temperatures, deviating water qualities (soft water) or where chloride is present.
  • DZR-brass is excellent in water boiler systems.
Check Stock

LINACAO 1/2/3Pcs Tools Free Copper Union Fitting with Sweat Solder Joint to Male Threaded Connects Compatible with Use Nominal Size Pipes (Size : 1)

  • This hex nipple fitting Compatible with connecting two threaded pipes with same diameters, and it has a hexagonal head Compatible with an increased bearing surface when adjusting the fitting with a wrench..
  • This fitting is made of Brass Compatible with corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Brass can be connected to copper, Brass, plastic, aluminum, and welded steel..
  • Can be used to connect various pipes, such as air Stone, fuel Stone, water Stone, etc..
Check Stock