Reviews Brass Copper Fitting

UltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting

  • Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Check Stock

LINACAO 1/2/3Pcs Tools Free Copper Union Fitting with Sweat Solder Joint to Male Threaded Connects Compatible with Use Nominal Size Pipes (Size : 1)

  • This hex nipple fitting Compatible with connecting two threaded pipes with same diameters, and it has a hexagonal head Compatible with an increased bearing surface when adjusting the fitting with a wrench..
  • This fitting is made of Brass Compatible with corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Brass can be connected to copper, Brass, plastic, aluminum, and welded steel..
  • Can be used to connect various pipes, such as air Stone, fuel Stone, water Stone, etc..
Check Stock

MroMax Brass Compression Tube Fitting-6mm /0.24\ ID Male Thread Pipe Adapter for Water Irrigation System 3Pcs

  • 【Product Size】Inner Diameter (I.D.): 6mm / 0.24".
  • 【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
  • 【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
  • 【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
  • 【Wide Application】Widely used in residential and commercial usage..
Check Stock

MroMax Brass Compression Tube Fitting-6mm /0.24\ ID Male Thread Pipe Adapter for Water Irrigation System 1Pcs

  • 【Product Size】Inner Diameter (I.D.): 6mm / 0.24".
  • 【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
  • 【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
  • 【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
  • 【Wide Application】Widely used in residential and commercial usage..
Check Stock

MroMax Brass Compression Tube Fitting-8mm /0.31\ ID Male Thread Pipe Adapter for Water Irrigation System 3Pcs

  • 【Product Size】Inner Diameter (I.D.): 8mm / 0.31".
  • 【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
  • 【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
  • 【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
  • 【Wide Application】Widely used in residential and commercial usage..
Check Stock

XINGYHENG Hex Brass Female Pipe Fitting Thread Straight Pressure Reducing Valve Connector CGA-320 to CGA-580 - CO2 Reducing Pipe Nut Fittings NPT1/4 Tank to Argon Pressure Regulator

  • 1.Durable material: The pipe fittings are made of brass and are resistant to corrosion, high temperature ductility and low magnetic conductivity., it is solid, durable, stable and reliable, with high hardness.
  • 2.Strict standards: Standardized processing, complete character specifications. The specifications includes brass pipe fitting with 24MM/0.94" Length 1/4 Female G threads..
  • 3.Perfect detail processing: Keep improving, brass plating on the surface, smooth and durable, the mother-child interface is smooth, not easy to fall off, and the detail processing is perfect and beautiful. Hex nut head, regular shape, thick material, perfect arc design, rounded edges, no burrs..
  • 4.Excellent performance: Brass pipe fitting is designed with female thread and hexagonal shape. For connecting Male threaded threaded threaded pipe, Matching threaded screw. good plastic toughness, small connection deformation, reliable force transmission, good fatigue performance, easy to check..
  • 5.Wide application: Copper pipe can be connected to copper, brass, plastic, aluminum and welded steel as fast joints, easy and fast connection. Widely used in Use in plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 1/8\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

SharkBite UC256LFA10 3/4

  • ELBOWS: SharkBite fitting 3/4 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems..
  • AFFORDABLE: Low cost solution to connect PEX Pipe Tubing.
  • COMPATABLE PRODUCT: Use with SharkBite PEX Clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. The SharkBite connection system is perfect for your next commercial or homeowner plumbing project..
  • LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.
  • QUALITY: Only SharkBites quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
Check Stock

uxcell Brass Compression Tube Fitting 10mm OD Tee Pipe Adapter for Garden Water Irrigation System

  • Fitting Tube Size: 10mm / 0.39" Outer Diameter (O.D.).
  • Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
  • Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
  • NOTE: Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
Check Stock

Litorange 3 Pack Metal Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter, 3/8\ Tube OD x 1/2\ NPT Male

  • ★ 【Material】: Heavy Duty Brass,strong and durable. Size: 3/8" Tube OD x 1/2" inch NPT Male Adapter..
  • ★ 【Firm And Durable】: Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability..
  • ★ 【Function】: Fitting connects to tubing on one end and has an NPT male connector on the other. Use with copper, brass, aluminum, or plastic tubing..
  • ★ 【Tips】: Single ferrule compression fitting has fewer possible leak paths than twin ferrule fittings. Primary uses water, gasoline, oil and vacuum lines..
  • ★ 【Package Include】: 3 PCS 3/8" Tube OD x 1/2" NPT Male connector. Comes with 1 year warranty..
Check Stock

BELEY 1/2 Inch & 3/4 Inch Olive Remover Puller Tool Removal Tool Solid Brass Copper Pipes Fitting Compression Fittings Thread Tool Puller Metric Handle Nut

  • US 1/2 Inch & 3/4 Inch Ferrule Removal Tool: The olive puller is suitable for any solid brass pipe fittings with a diameter of 15mm and 22mm. Solid....
  • Main Function: The olive puller uses a compression fitting to lock the nut, and takes out the used or damaged olive from the copper pipe without....
  • High-Quality: The copper pipe fittings are made of solid brass. The high-quality brass makes the product sturdy and durable, with high strength, high....
  • Easy to Use: The olive removal tool can remove most olives and can also increase torque, which is appropriate for various tasks. And the operation is....
  • After Sales Service: We provide 7X24h service. If you have any questions about this brass tube, please feel free to reach us via email..
Check Stock

Joywayus 3/8\ Tube OD Brass Ferrule Fittings Compression Sleeves Brass Compression Fitting(Pack of 50)

  • Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock