Reviews Brass Copper Alloy

DuraChoice 2-1/2\ Oil Filled Vacuum Pressure Gauge, Water Oil Gas - Stainless Steel Case, Brass, 1/4\ NPT, Lower Mount Connection -30HG/30PSI

  • [MATERIAL]: Housing Material: Stainless Steel.
  • [APPLICATION]: Brass wetted parts for measuring non corrosive liquid and gas pressure. It is widely used in heating pipe network, oil and gas transmission, water supply and gas supply system, vehicle maintenance shop, etc..
  • [HIGH PERFORMANCE]: Shock resistant,can be used in vibration places.
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

Fishing CRR Carolina Ready Rig Brass Worm Weights

  • Each rig includes a 1oz brass bullet sinker, 3 red plastic beads, a brass amplifier, a brass barrel swivel.
  • Especially suits bottom fishing in cooler water.
  • The beads are knocking sound can attract fish when bumping with the sinker.
  • Pre-rigged Carolina rigs are suitable for your worm lures.
Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
  • VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
  • EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
  • VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
  • STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check Stock

3D Printer 500℃ High Temperature Plated Copper Heater Block Compatible with PT100 Cartridge Sensor Version V6 Hotend Titan Aero Extruder (Copper)

  • It is machined with very high precision and high quality.
  • Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control..
  • This heater block is for OD 3mm cartridge temperature sensor.
  • This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing. In addition to high temperature performance this Block have an advanced nickel based plating.
Check Stock

Libraton Tubing Cutter 3/16\ to 1-1/8\

  • SPECIFICATIONS: Libraton Mini Tubing Cutter is designed to cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 3/16" to 1-1/8" ( 4-28mm ) Outer Diameter OD..
  • GREAT FOR SMALL SPACE: This tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • HIGH PERFORMANCE CUTTING BLADE: Blade of our pipe cutter is made of most durable and high quality Alloy Steel for quick and clean cut..
  • STURDY: The copper tube cutter body is made of light weight and durable heavy duty alloy steel, 2 flare groove rollers for precision cuts operation, strong corrugated knob for comfortable stable operation..
  • EASY TO OPERATE & AFTER-SALE SERVICE GUARANTEE: Rotate the knob to grip tube, revolve copper tubing cutter around the tube, tighten grip smoothly after each full circle until full cut. Please let us know if you have any problem with this copper tube cutter. Our service team promise to reply to any of your messages within 24h..
Check Stock

CARBO Instruments 2-1/2 Pressure Gauge Chrome Plated Steel Case Dry Vacuum -30 Hg/0 Lower Mount 1/4 NPT

  • ASME B40.1 Grade B Accuracy Compliance ± 3-2-3 % of span.
  • Oil, Water, Air, Compressor, Hydraulics, HVAC, Gaseous & Liquid media that are not highly viscous or crystallizing and not corrosive or oxidizing to copper alloy parts.
  • Dual Scale: psi / bar with kPa guidance..
  • Burdon tube type, Brass and Copper Alloy Wetted Parts, Glass Window Lens.
Check Stock

Supplying Demand SW-ALCU5.5 5 Rod Pack Aluminum to Copper or Brass 8 Inch Brazing Rods Appliance Refrigeration HVAC

  • Solution temperature during heat treating must be below the solidus of the braze alloy in order to ensure integrity of the joint is maintained..
  • Joining all brazable grades of aluminum and copper.
  • Aluminum to Aluminum or Aluminum to Copper wire pigtail splices.
  • Aluminum to Copper, Aluminum to Brass or plated terminals.
  • HVAC applications with Brass, Copper, Aluminum and Steel. Is effective with any of these heat sources: Oxy-acetylene torch, Natural gas torch, MAPP Gas, Induction..
  • Quantity per pack: 5 | Rod Length: 8 inches | Shelf Life: 2 years at ambient temp. | Density (Lbs/in³): 0.19 | Recommended Brazing Temp.: 950-1000°F (510-537°C) | Liquidus: 905°F (471°C) | Solidus: 826°F (441°C) | Appearance: Silver-Colored with White Flux Channel.
  • Supplying Demand replacement parts are compatible with Major Brands, but you should always verify compatibility with your specific application..
Check Stock

CARBO Instruments 2 Pressure Gauge Chrome Plated Steel Case Dry Compound Vacuum -30 Hg - 0-30 psi Back Mount 1/4 NPT

  • ASME B40.1 Grade B Accuracy Compliance ± 3-2-3 % of span.
  • Oil, Water, Air, Compressor, Hydraulics, HVAC, Gaseous & Liquid media that are not highly viscous or crystallizing and not corrosive or oxidizing to copper alloy parts.
  • Dual Scale: psi / bar with kPa guidance..
  • Burdong tube type, Brass and Copper Alloy Wetted Parts, Glass Window Lens.
Check Stock

CARBO Instruments 2 Pressure Gauge Chrome Plated Steel Case Dry Compound Vacuum -30 Hg - 0-30 psi Lower Mount 1/4 NPT

  • ASME B40.1 Grade B Accuracy Compliance ± 3-2-3 % of span.
  • Oil, Water, Air, Compressor, Hydraulics, HVAC, Gaseous & Liquid media that are not highly viscous or crystallizing and not corrosive or oxidizing to copper alloy parts.
  • Dual Scale: psi / bar with kPa guidance..
  • Burdong tube type, Brass and Copper Alloy Wetted Parts, Glass Window Lens.
Check Stock

Fox Alloy 20pcs Copper Brazing Rods BCuP-2 (5/64\) 2mm Phosphor Round Self Fluxing Copper Welding Rods Sticks TIG Arc Pipes for Air Conditioner Refrigerators

  • Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod.
  • Standard: The copper welding rods kit conforms to AWS A5.8.
  • Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The stick TIG welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions..
Check Stock

CARBO Instruments 2-1/2 Pressure Gauge Chrome Plated Steel Case Dry Compound Vacuum -30 Hg - 0-30 psi Lower Mount 1/4 NPT

  • ASME B40.1 Grade B Accuracy Compliance ± 3-2-3 % of span.
  • Oil, Water, Air, Compressor, Hydraulics, HVAC, Gaseous & Liquid media that are not highly viscous or crystallizing and not corrosive or oxidizing to copper alloy parts.
  • Dual Scale: psi / bar with kPa guidance..
  • Burdon tube type, Brass and Copper Alloy Wetted Parts, Glass Window Lens.
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock