Reviews Brass Blanks

ImpressArt - Bracelet Bending Bar Kit Tool for Bending Metal Blank Bracelets Cuffs Bangles for Metal Stamping & Metal Engraving

• Used to easily bend metal bracelet stamping blanks into cuffs, bracelets, and bangles to a flat top that sits nicely on the wrist with minimal effort..
• Bends metals including: aluminum, brass, copper, Alkeme, thin steel and more.
• Create unique & personalized metal bracelets with the ImpressArt Bracelet Bending Bar Kit. The kit comes complete with one bracelet bending bar and....
• Includes 8 bracelet stamping blanks in 2 different sizes: (4) Aluminum Bracelet Blanks, 1/4" x 6", 14 gauge & (4) Aluminum Bracelet Blanks, 3/8" x 6",....
• Bending Bar easily shapes metal strips into bracelets. Simply place the strip into the notch and bend around the curved arch. Then do the same for the....

Master Lock K81KRBOX Padlock Key Blank 50-Pack

• Key blank for: 81, 82, 530, 532, 533, 570, 575, 576, 751, 991, 992, 1710 and 1714 locks.

Brass Aluminum Bracelet Blanks Stamping Copper Cuff Bracelet Blanks Metal Stamp Bracelet Blanks Stamp Bracelet Making Kit Ring Metal Strips for DIY Bracelet Jewelry Making, Pack of 16

• Proper Size for Needs: the bracelet blanks for metal stamping measure approx. 6 x 150 mm/ 0.24 x 5.91 inches, ideal for stamping, engraving and imprinting crafts, also appropriate for easy carry and store without occupying much space.
• Show Your Style: you can apply these copper bracelet blanks to make your own items, just use stamp carving tools (not included), then wipe the surface of the metal cuff bracelet blanks redundant mark, to make your personalized bracelets and jewelry gifts.
• Serve You Long: adopting 3 kinds of materials, available in aluminum, red copper and brass, our bracelet stamping blanks are not easy to break, with nice extension, they can be bent and shaped simply, allowing you to keep them for a long term.
• Ample for Your Needs: we have prepared a total of 16 pieces of metal stamp bracelet blanks in assorted colors in the package for you, abundant quantity to satisfy your use and replacement as well as sharing demands.
• Suitable for DIY Lovers: you can stamp some different words, small patterns, sentences or someone's name on these copper cuff bracelet blanks, providing you a chance to exercise your imagination and hands on ability.

DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks

• LOCATE AND DRILL PEN BLANK CENTERS: The DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks vertically holds and centers pen blanks up to 1.5 inches (3.8cm) square and makes center drilling of pen blanks a repeatable process that is easy.
• NO MORE MARKING THE CENTER: Once clamped and centered under the chuck, it is quick and easy to drop in a blank and drill a centered hole.
• You will appreciate not having to mark the center on each blank.
• EASY SETUP: Unique support and threaded design that makes setting up the jig a simple one-time process.
• There is no need to change the setup again to center and drill multiple pen blanks.
• USE YOUR TOOLS: Use this vise with your existing drill press to drill a perfect center hole for the brass tube before putting the blank on a mandrel for turning on a lathe.
• VARIOUS APPLICATIONS: Will hold both square and rectangular pen blanks up to 1.5 inches (3.8cm) square and can also be used for other applications such as wine stopper projects.

ABBECIAO 1”Brass Valve Tags Stamping Tags 0.04” Round Engraved Metal Blanks Chits with Hole for Pipe Valves, Equipment, Tool and Keys Labeling 50 Pack

• Brass blanks size: the round valve tag is 1 inch in diameter, thickness:0.04inch, and the hole size is 0.12 inch ..
• Packaging: A total of 50 pieces of metal brass discs for stamping, laser engraved, with an etching pen. enough quantity for personal or small business use also could be as a practical gift share them with your family members or friends..
• Wide application: these 1inch circle metal tags won’t produce a spark, making them safe to use as valve tags, also could be applied as plant signs, equipment tags, tool tags, pet ID tags, etc..
• you can use your imagination to apply them to different places in your life since they are very practical..
• Solid brass material: these round brass blanks are sturdy, reliable, and non-corrosive, oil and water resistant, and have good durability not only indoors but also outdoors, as well as in humid environments around plumbing and steam..
• With hole design: each round tag has a hole with a size of 1/8 inch in the top center, making our tags compatible with many utility hooks and nylon cable ties (the package not included), practical and conv....

ImpressArt Metal Stamping Kit for Jewelry Making - Basic Uppercase Alphabet 3MM Metal Stamps Set Ergo-Angle Hammer Steel Bench Block Stamping Blanks

• METAL STAMPING KIT is a jewelry making kit that includes everything a beginner maker or artisan needs to get started with DIY jewelry and hand....
• METAL STAMPS: ImpressArt’s Basic Uppercase Metal Stamp Set will stamp soft metals for jewelry and keepsakes, including brass, copper, nickel silver,....
• BRASS HAMMER: ImpressArt Ergo Angle Metal Stamping Hammer is an essential metal stamping tool that was designed specifically for makers, as it has....
• BENCH BLOCK: ImpressArt 2" Steel Block with Rubber Feet provides a hard striking surface that is perfect for metal stamping. No jewelry making kit is....
• STAMPING BLANKS: Jewelry stamping kit includes five 1" Aluminum 14 gauge practice blanks. Aluminum is a great metal to start with, and a vital....

ImpressArt Brass Head Ergo-Angle Metal Stamping Hammer (1 Pound), Great for Stamping Jewelry, Leather & Wood

• ...ds are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank. This prevents double impressions and also provides longevity to your stamps and steel punches..
• Back side of the head of this brass stamping hammer can be used for flattening metal stamping blanks into form..
• NOTE: being that the brass head is softer than steel stamps, the brass head will dent and flake when stamping. This is by design and will not affect the quality of your stamping..

97 Pcs Jewelry Metal Stamping Kit Metal Stamps Set Include Art Font Letter Punch Set Number Punch Set Hammer and Steel Bench Block for Imprinting Marking on Metal Wood Leather, 3 mm

• Package Include: this metal stamps set includes 1 piece art font capital letter punch set (include 27 pieces), 1 piece art font lowercase letter punch (include 27 pieces), 1 piece number punch set (include 9 pieces), 1 piece hammer, 1 piece steel bench block, 1 piece stamping jig,30 pieces aluminum practice blanks, and 1 piece black oily double ended marker.
• Our kits are complete to meet your daily jewelry stamping needs.
• Reliable and Quality: these 3 mm steel punches are made of quality chrome vanadium steel, and the stamps are designed to withstand up to 10,000 punches.
• You can as you like to form consecutive phrases and digital stamps.
• No Rebound Steel Bench Block: steel stamping blocks feature non slip rubber feet that absorb shock, stay in place, and create a solid surface to work on, resulting in stable, clean, and accurate hits.
• This will make the pattern or lettering we work more delicate.
• 30 Stamping Blanks: the stamping kit includes 30 aluminum practice blanks.
• Aluminium is a soft metal suitable for making fine handmade jewelry or fine family keepsakes.

KW1 Kwikset Key Blanks Box 250 by JMA

SC1 Brass Key Blanks Box 50 by JMA 1-pack

New Blank Uncut Metal Key for (KW1) Kwikset Brass Finish (Pack of 10)

Salsbury Industries 2499 Key Blanks for Standard Locks of Data Distribution Aluminum Boxes (Box of 50)

• Compatible product manufacture by Salsbury Industries.
• Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936.

PSI Woodworking LX260 1\ Roughing Gouge M2 HSS Woodturning Chisel

• Primarily used for aggressively reducing square spindle blanks to round, resulting in a rough cut blank ready for detailing with a spindle gouge, skew chisel, or other turning tool.
• Do not use a roughing gouge for bowl turning.
• Total tool length is 18-1/2" with a 7" blade and 11-1/2" handle.