Reviews Brakes Lining

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Liqui Moly 20240 Liquimoly Brake Anti-Squeal Paste 200 mL

  • Extremely adherent, resistant to road salt and splash water.
  • Prevents and eliminates squealing sounds from brakes that occur between the brake caliper pistons or contact points and brake lining.
  • Secures the function of the entire brake system and prevents the seizing or rust freezing of the rims on the wheel hubs.
  • Application range - 40 Degree to + 1200 Degree.
  • A special synthetic agent for use in the brake system.
Check Stock

Acouto Brake Pad Thickness Tool Car Brake Pad Tester Vehicle Brake Pad Thickness Gauge Brake Pad Lining Measure Tool Automotive Measurement Brake Shoe Gauge

  • 6mm / 0.2in---- This brake pad thickness tool is designed for brake pads (IV, V category) with 6mm / 0.2in thick base plate. This car brake pad tester is suitable for internal and external brake pads, with 1.5mm marking and calibration check.
  • Professional Design---- The slender design allows the tool to position the back of the lining plate, so that the probe can measure the distance between the bottom of the lining plate and the brake disc.
  • Practical Tool---- This brake pad thickness gauge is an ingenious tool that saves time, which is essential to any vehicle. Measure the brake pads of the vehicle without removing the wheels.
  • Easy to Use---- The brake pad lining measure tool is easy to operate and use, align the brake pads and press to measure, which is very convenient and highly practical.
  • Customer Said---- I do not use anything else when I inspect brakes on the vehicle. The tool is so simple to use and to read that anyone can do it the first time. Is that it removes the backing plate measurement of the brake pad and give you the real measurement of the pad only.
Check Stock

QuickCar Racing Products 61-103 Mini Brake Bias Gauge Panel

  • Disc and drum brakes - useable with both disc and drum style brake pads on any type of vehicle from passenger cars and trucks to heavy duty transportation.
  • Color-coded - color powder-coated blades help to quickly determine the brake pad status when examining brake lining.
  • Durable steel - the durable 20-gauge steel blades won't easily bend or break like plastic.
  • Stamped callouts - each blade has both metric and SAE measurements stamped into the metal.
  • Blade sizes - yellow blade tip measures 4/32 (0.1250)-inch (3.18mm) and the red blade tip measures 2/32 (0.06259)-inch (1.59mm).
Check Stock

BELL Binder 100 Caliper Brake Pads

  • Side stop caliper brake pads, pads for standard side pull And center pull brakes, raised ribs for all weather stopping.
  • Ideal for comfort or cruiser bikes with Caliper brakes.
  • Pads for standard side pull and center pull brakes.Raised ribs for all weather stopping.Great value.
  • Pads for standard side pull and center pull brakes.
Check Stock

ABN Brake Drum Tool Kit 15-Piece Service Brake Kit with Spring Pliers Brake Spoons Pad Gauge Brake Spring Tool

  • ...ROFESSIONAL GRADE AUTOMOTIVE TOOLS: The ABN 15-piece Drum Brake Service Kit is designed to allow you to remove and replace worn and broken brake parts and to make it easier to reach other parts.
  • These rear brake tool sets are designed to be used on most foreign and domestic cars and trucks.
  • SERVICE YOUR VEHICLE BRAKES: Whether you are a seasoned mechanic or a home mechanic, this automotive tool set allows you to service your vehicle brakes by making it easy to replace springs, check your pads, and reach other parts of the drum brake system.
  • EASY TO USE: The spring installer, remover, and retainer tools help to adjust brake springs safely to get to deeper parts of your brake system while the various adjustment spoons help you adjust clearance between the drum brake and brake shoe.
  • The 8 brake lining thickness gauges help you to identify thickness levels to know when its time to change your pads.
  • BUILT TO LAST: Constructed of heavy-duty metal, these brake tools are designed for durability and longevity.
  • Each standard sized brake adjusting tool has a chrome finish to protect from rust and corrosion.
  • The spring puller tool, spring installation tool, and spring retainers have ergonomic handles for comfort when using.
  • CONTENTS: Drum brake tool kit include....
Check Stock

Bloch Women's Phantom Jazz Shoe, Tan, 8 M US

  • Phantom slinks across the dance floor with style and grace!.
  • Stretch canvas upper with elasticized binding conforms to contours of the foot for a streamlined, comfortable fit..
  • 100% cotton lining adds strength and helps the shoe to breathe..
  • Moldable suede front sole allows spins but brakes when flat..
  • Rubber outsole for added grip. The heel has been strengthened to prevent collapsing. Wide widths: to accommodate a wider width foot, the manufacturer recommends going a half size up from your normal size. Measurements: Heel Height: 1⁄4 in Weight: 2 oz Product measurements were taken using size 38.5 (US Women's 8.5), width Medium. Please note that measurements may vary by size. Weight of footwear is based on a single item, not a pair..
Check Stock

ITEQ Brake Lining Thickness Gauge 8 Piece SAE & Metric Steel Constructions

  • Color coded brake pad gauge to identify thickness level ranges for brake lining inspection.
  • The brake measuring tool can be used to quickly gauge any vehicle including trucks and heavy duty transportation.
  • Set of 8 gauges denoting 3 thickness levels: Green, Yellow & Red, which indentify if the brakes are still good (Green), should be serviced (Yellow) and must be serviced (Red).
  • Each gauge blade has both Metric & SAE: 3 green (12, 10, 8 mm & 0.4724, 0.3937, 0.3150 inch), 3 yellow (6, 5, 4 mm & 0.2362, 0.1969, 0.1575 inch), and 2 red (3, 2 mm & 0.1181, 0.0787 inch).
  • Constructed out of steel with powder coat riveted together for extra strength and durability.
Check Stock

BlueSunshine BB8 Front and Back Disk Brake Kit - 160mm for 80cc Gas Motorized Bicycle (BB8 Disk Brake Kit - G3-3)

  • CNC bike V brake Set Forged alloy construction.
  • Coil springs design aims for rim brakes tension adjustment，extended 4-finger brake levers are compatible with V-brakes and cantilever brakes..
  • CNC MTB brake levers are only suitable for bike handles in 22mm-22.2mm diameter，Arm Length: 110mm..
  • 1 pair of high quality 70mm(Length) V brake pads come with the direct-pull cantilever Brakes set..
  • They are universal V-brakes compatible with both front/rear wheels of MTB/BMX/mountain/road/folding/hybrid bike, especially for most small wheel bicycles such as 24 inches or smaller ones..
Check Stock

BAR MITTS Road Bicycles Extreme Cold Weather Handlebar Cover for Campy/SRAM/Shimano with Internally Routed Cables Black Large C203BLK

  • Fleece lining & removal Velcro cuffs with no draw string complications. Mitt stay stiff Allowing easy access & removal of hands.
  • For ventilation & temperature regulation, a zipper is located along the front of the mitt with an extended zipper pull.
  • Fits road Drop handlebars with Camps/SRAM levers or Aero brakes where all cables are wrapped under the bar tape.
  • Can be used with regular cycling Gloves of varying thickness, increasing dexterity due to thinner Gloves.
Check Stock

CNC V Brake Set, Bicycle Linear Pull V Brakes for Front/Rear Wheel,V Brake with Lever and Cable， Long Arm 110mm, Red Black

  • CNC bike V brake Set Forged alloy construction.
  • Coil springs design aims for rim brakes tension adjustment，extended 4-finger brake levers are compatible with V-brakes and cantilever brakes..
  • CNC MTB brake levers are only suitable for bike handles in 22mm-22.2mm diameter，Arm Length: 110mm..
  • 1 pair of high quality 70mm(Length) V brake pads come with the direct-pull cantilever Brakes set..
  • They are universal V-brakes compatible with both front/rear wheels of MTB/BMX/mountain/road/folding/hybrid bike, especially for most small wheel bicycles such as 24 inches or smaller ones..
Check Stock