Reviews Brake System Tool

Blue Ox BX88206 Coiled Cable with Female Receptor

  • The Trailer conversion connection wire functions as a converter tool which fit all 2-wire vehicle electrical system to standard 3-wire trailer RV hitch pick up trucks. 2.1 amps signal circuit, 5.0 amps taillight circuit..
  • Our trailer tailight conventer model converts 2-wire system ( left and right turn/brake) to a 3 wire system (left and right turn, brake seperate) also fit some 4 wire to 5 wire trailer light system that allow to split brake and turn signals on pick up trucks into separate wires..
  • Noted: tailgate light/tail light function is not support in this converter so does not run though this converter. Truck can't tell the difference between blinker and brake light. Once you separate both of two, Since it reads AND signals, your additional blinkers won't flash with the hazard lights, but your brake lights will..
  • Easy install by yourself. Standard color code wire connection. Functions was mark on the converters for help you install simultaneously. The best is use a multimeter to ensure the input and output Voltage..
  • The trailer converter is a great tool for trailer to Splice turn signal / brake light ..
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

Phoenix Systems (2005-B) Bench Brake Bleeder Kit, One Person Bleeder, Fits All Makes and Models

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bench bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The Bench Bleeder is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

Phoenix Systems (2003-B) V-12 Reverse Brake & Clutch Bleeder Kit, Medium Duty One Person Bleeder, Hard Case

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The V-12 is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid. Comes with a injection molded hard case..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

  • 5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
  • COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
  • EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
  • CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
  • PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

Spurtar Brake Caliper Press Tool Brake Caliper Tool Spreader 4 in 1 Universal Disc Brake Caliper Compression Tool Ratchet Piston Spreader Automotive Tools for Car Brake Repair Installation Blue

  • MULTIFUNCTION 4-1: Spurtar Brake Caliper Compression Tool is ideal for automotive brake pump adjustment. Works on single piston, dual piston and quad piston, as well as single and twin piston floating calipers.
  • RATCHETING: Automotive brake caliper centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • 360-DEGREE RATCHETING: Ratchet technology of this Brake Caliper Tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • EASY TO USE: This caliper piston tool extended reversing lever allows for easy change from spreading to retracting. Cushioned grip handle provides comfortable and easy grip.
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability, which is an useful brake tools for automotive replacement brake system parts.
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

JIFETOR Brake Caliper Press Tool, 360 Degree Swing Ratchet Expander Wrench Car Wheel Piston Spreader with Extra 2PCS Large Plates for Single Twin Quad Sextuplet Piston Disc Brake Caliper

  • ...queezing. The ratchet is in the centre of the spreader, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation..
  • WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need..
  • EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing..
  • PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel....
Check Stock

OEMTOOLS 27111 Disc Brake Tool Set Front and Rear Brake Piston Tool 11 Adapters Included for Use with Most Cars Forces or Rotates Pistons into Calipers

  • DISC BRAKE CALIPER TOOL SET: This disc brake caliper tool kit assists in the replacement of brake pads on most 4 wheel disc brake vehicles.
  • WORKS WITH MOST CARS: Our OEM brake caliper tool set includes 11 adapters for use on most domestic and imported cars that require clockwise rotations,....
  • QUICKLY FIT BRAKE PADS: The brake piston caliper tool set forces the pistons straight back into the brake calipers and rotates the pistons back into....
  • HEAVY DUTY DISC BRAKE PISTON TOOL: These brake caliper kits are constructed from steel for long-lasting strength and durability.
  • CONVENIENT STORAGE: This front and rear brake caliper tool set comes in a sturdy plastic case for easy storage, organization, and portability, making....
Check Stock