Reviews Brake Rotor Honing Tool

Osborn 77240SP NovoFlex Honing Tool, Silicon Carbide, 1200 Max RPM, 1.5\ Hole Diameter, 1.75\ Item Diameter, 0.25\ Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The hone brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is not possible with conventional honing stones.
  • Size: 1200 Max RPM, 1.5" Hole Diameter, 1.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

Osborn 77378SP NovoFlex Honing Tool Silicon Carbide 1200 Max RPM 2.5 Hole Diameter 2.75 Item Diameter 0.25 Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is....
  • Size: 1200 Max RPM, 2.5" Hole Diameter, 2.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

ABN Brake Cylinder Hone – 1-1/8in 3 Stone Piston Honing Tool Cylinder Bore Hone with 3/4in to 2-1/2in Honing Range

  • MAKE BREAK REPAIR JOBS EASIER: Remove carbon, rust, and heat glaze deposits from your caliper and piston cylinder walls with the ABN | 1-1/8 Inch Cylinder Bore Honing Tool Small Engine Cylinder Hone Kit.
  • Compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your engine cylinders.
  • BUILT TO LAST: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity.
  • The flexible shaft and spread-control tension nut allow faster cutting and maneuverability.
  • 3 stone design makes insertion easy by self-centering.
  • Stone sleeves add strength and protect your abrasive stones when not in use.
  • PERFECT SIZE FOR YOUR NEEDS: Rigid honing tools for a drill features 3 carbide stones that help you remove glaze build up on your brake cylinders.
  • 220 medium grit stones measure at 1-1/8 by 3/16 by 1/8 inches (2.8 by .5 by .3cm).
  • Square ends of stones make this small brake hone tool ideal for step-cut and blind-end cylinders.
  • ADJUSTABLE RANGE: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating a smoother, cleaner surface.
  • Spring and knurled adjusting nut increase tensi....
Check Stock

EWK 1-1/4 to 3-1/2 Inch 3 Stones Engine Cylinder Hone Tool Adjustable Cylinder Deglazer Piston Honer 220 Grit

  • 【Perfect Honing】 EWK cylinder honing tool is perfect to deglaze the walls of cylinders in gasoline and diesel engines. Idea for remove burrs and....
  • 【Smooth Surface Deglazing】Fits 1-1/4" to 3-1/2" (31.75mm to 88.9mm) diameter brake caliper bores, engine cylinders of automotive, motorcycle and....
  • 【Highly Flexible】 Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The....
  • 【Durable & Long Lasting & Replaceable】 Made of premium steel, maximize the cylinder honing tool with extra strength and durability. The 220 grit....
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast....
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

Farbetter Bike Disc Brake Kit Including Front and Rear Caliper 160mm Rotor Mechanic Tool-Free Pad Adjuster for Mountain Bike Road Bike Fixed Gear Bike MTB BMX Red

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Rear Brake Cable, 1x Disc Rotor Adjuster, and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets-Disc Rotor Adjuster, help you to adjust the gap between rotor and caliper easily..
  • Ideal Replacement: with fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Widely Compatible: Suitable for most Mountain Bike, Road Bike Mechanical Disc Brake System..
Check Stock

Sunlite BRAKESET SUNLT MX1000 ALY RRw/FT Bolt BK

  • Used for brake systems of ordinary bikes, mountain bikes and road bikes..
  • Freewheel Threaded Hubs, Hole distance of 48mm, an inner diameter of 34mm(approx).
  • Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm. ROTOR MOUNTING BOLTS are included.
  • Note: F160 Front Brake: (Also named F160/R140) If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor. R160 Rear Brake: (Also named F180/R160) If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor..
  • Package Content: Mechanical Bike 160mm Rotor Front and Back Brake Disc Kit x 1.
Check Stock

Farbetter Mechanical Bike Disc Brake Kit, Including Front and Rear Caliper, Brakes Cables, Brake Levers, 160mm Rotor, with Cable End Tips Caps, Rotating S-Hook Clips, Disc Rotor Adjuster (Black)

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Brake Cable Kit, 1x Disc Rotor Adjuster, 4x Cable End Tips, 2x Rotating S-Hook Clips and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Ideal Replacement: Choose the best for each component, and you can upgrade it in one step with only one purchase. With fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets- Cable End Tips prevents wire core from bifurcating, resulting in uneven force on the wire core off-line.
  • Disc Rotor Adjuster help you to adjust the gap between rotor and caliper easily..
  • Widely Compatible: Suitable for most mountain bike of mechanical disc brake system. Please check the size of your bike and whether it is suitable to install mechanical disc brakes to avoid buying it by mistake..
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Mountain Bike Disk Brake Set G3/ HS1 Bicycle Disc Brake Kit Front and Rear 160mm Caliper Rotor with Bolts and Cable (HS1 A Disc Brake Set)

  • F160R140mm--front clipers,means choosing the 160mm rotors if you want to intall the clipers at the front wheel,and for rear wheel you have to choose the 140mm rotor.
  • F180R160mm--front clipers,means choosing the 180mm rotors if you want to intall the clipers at the front wheel,and for rear wheel you have to choose the 160mm rotor.
  • It is general for mountain bikes and electric bicycle?Front and Back - 160mm rotor diameter..
  • Center 6 bolt pattern diameter on rotor is 44mm..
  • Disc brake Rotor, disc brake caliper and to make the disc brake pads can not be stained with oil, change the disc brake caliper or to make the disc brake pad before the rotors to avoid oil on the disc brake disc will affect the brake effect, you can use alcohol to clean the disc brake rotors..
Check Stock

ACETOP Bike Disc Brake Kit, Front & Rear Bicycle Aluminum Alloy Brake Caliper, 2 Pcs 160mm 6-Bolt Stainless Steel Disc Rotors for Mountain Bike, Road Bike, Folding Bike, BMX

  • High-quality Materials: Aluminum alloy bike disc brake calipers, anti-corrosion, anti-rust, high-temperature resistance. The brake surface polished on both sides, and brake is sensitive and quiet. The disc brake base design is resistant to breaking..
  • Appropriate Size: All aluminum alloy bike disc brake kit have 75 mm and 51 mm mounting bolt spacing, and each weighs 174g. The disc Rotor has an inner diameter of 44 mm, an outer diameter of 160 mm, and a thickness of 2 mm, each weighing 95g..
  • Stainless Steel Rotor: Stainless steel ultra-light rotor, which also has excellent braking force and modulation ability. The entire rotor has many ventilation holes to help dissipate heat..
  • Simple Operation: Equipped with 4mm hexagon screwdriver(Size: 60 mm x 22.5 mm.
  • Only for 12 Disc Rotor Titanium Bolts) ,which can be installed and disassembled the front & rear bike brake disc, and it is also very convenient for maintenance..
  • Widely Compatible: Our 6-Bolt rotor calipers exquisite workmanship, it is an ideal upgrade part for your bike, and suitable for most mountain bike and road bike mechanical disc brake systems, and can be used with the majority 6 Bolt compatible hub..
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers, Mechanical Disc Brakes for MTB, Mountain Bike, E-bike and Electric Bike 2PCS Front/Rear Red

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way brake system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check Stock