Reviews Brake Pedal Parking Brake

General Motors 3898059, Parking Brake Strut

  • Genuine Oem:Yes, Category 2:Parking Brake, Fitment Footnotes:Electric Motor, Other Part Number:13500740, 13505410, Quantity Needed:1.
  • Brand:GM, Fitment Type:Direct Replacement, Vendor:Vendor, Alternate Item Name:Parking Brake Lever, Category 1:Brakes.
  • Manufacturer Part Number:19299315, Category 3:Parking Brake, Superseded Part Number:13500740, Item Name:Parking Brake Lever, Placement On Vehicle:Rear.
Check Stock

Thrustmaster T3PA Add-On (PS5, PS4, XBOX Series X/S, One, PC)

  • 100% metal pedals and internal structure.
  • A component of the TX Racing Wheel ecosystem.
  • also compatible with the Ferrari 458 Spider Racing Wheel.
  • 3 pedals with adjustable spacing setting (3 positions) and adjustable angle setting (2 positions).
  • Accelerator pedal with adjustable height setting (2 positions).
  • Pedals with individual pressure settings: Accelerator pedal-approx. 5.5 lbs..
  • Brake pedal-approx. 22 lbs. (without Conical Rubber Brake Mod).
  • Brake pedal: 33-55 lbs., according to your preference (w/Conical Rubber Brake Mod).
  • Includes optional conical rubber brake mod: Conical stop made from industrial-grade high-density rubber.
  • Realistic sensations, with ultra-progressive resistance at the end of pedal's travel.
  • Wide and perfectly stable: Wide, textured footrest.
  • Built-in threaded holes for cockpit setups.
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

Glodorm Upgrade Mod Brake and Throttle Pedal Spring Kit for LOGITECH G27 G29 G920 Racing Wheel

  • Design background of the Brake and Throttle Pedal Spring Kit: Many Logitech racing owners report that the original brake and throttle pedal is too soft or too hard, so it can not experience the real brake and throttle pedal.The modified solution is to improve the feel of the Brake and Throttle by replacing our specially designed Brake and Throttle springs and simulated vacuum hydraulics.This is by far the cheapest way to convert..
  • Advantage: Improve pedal feel with a balanced increase in firmness. Simulates the pedals in a real car.Improve lap time and consistancy when compared to an unmodified pedal..
  • Suitable for: Logitech G27 / G29 / G920 Racing Wheel( If you are not sure if your model can be installed, you can contact us to confirm.).
  • Glodorm Upgrade Mod Brake and Throttle Pedal Spring Kit for LOGITECH G27 G29 G920 Racing Wheel.
  • Packing includes:1 * Specially Designed Brake Spring, 1 * Specially Designed Throttle Spring, 2 * Wrenches.
Check Stock

APDTY 31840 Replacement Rubber Parking Brake or Clutch Pedal Pad 1 Pad

  • Brand New Parking Brake Or Clutch Pedal Rubber Cover Pad.
  • Sold Individually - Includes 1 Single Pedal Pad.
  • Replaces GM 12338071, 12474603, 25506817.
Check Stock

Mantis 67520 Tri-Rad Folding Adult Tricycle 20 inch Wheels 16 inch Frame Unisex Blue

  • Frame/Fork: Folding steel frame with steel suspension fork. Age Range- 12 years and Up.
  • Wheels/Tires: Aluminum rim with 20 X 1.75 inch white wall Kenda tires.
  • Drivetrain: Single speed, one piece crank. Front alloy linear pull brake with parking brake.
  • Brakes/Cockpit: Front V-brake with parking brake, easy adjust steel stem, large comfort saddle.
  • Includes: Front fender, rear basket, parking brake, bell, chainguard. Folded dimensions of 35"L x 30"W x 31"D.
Check Stock

NOWIGOT 2pcs,Red Accelerator Gas Pedal Brake No Drilling Pedal Cover Anti-Slip Performance Aluminum Alloy Foot Pads Kit Fit for for Dodge Challenger Charger Chrysler 300 2009-2021

  • ☛Fitment:Gas Brake Pedal cover fits for Dodge Challenger /Dodge Charger / Chrysler 300 2009-2021.(Not fit for SRT&2016 Charger)（Before placing an order, please make sure that the photo is the same.）.
  • ☛High Quality:The Made of high quality aluminum alloy with black anti-slip rubber, Non-slip surface design.NOTE:The original brake pedal rubber pad needs to be removed before installation.Otherwise, the brake pedal cannot be properly installed on our products..
  • ☛Safety Design:Black anti-slip rubber strip, increasing the friction between the soles and pedals, wear-proof and corrosion-proof, improve safe driving..
  • ☛Easy installation:No need tools, please remove the original brake pedal rubber pad after remove, can install brake pedal pad, gas pedal cover don't need to remove. (Note: Remove the factory brake rubber padel cover to add our brake pedal product.).
  • ☛Quality Guarantee:If you're not satisfied with our pedal, simply return it for a full refund in 30 days, no questions asked money back. We will reply within 24 hours and give you a satisfactory answer..
Check Stock

Thrustmaster T3PA Wide 3-Pedal Set Xbox One/PC

  • T3PA Wide 3-Pedal Set for TX Racing Wheel Ferrari 458 Italia Edition & Ferrari 458 Spider Racing Wheel.
  • 3 pedals with adjustable spacing settings (3 positions) & adjustable angle setting (2 positions).
  • Accelerator pedal with adjustable height setting (2 positions).
  • Pedals have individual pressure settings: accelerator pedal-approx. 5.5lbs.
  • brake pedal-approx. 22lbs (without Conical Rubber Brake Mod).
  • brake pedal: 33-55lbs, according to preference (with Conical Rubber Brake Mod).
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
  • Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
  • Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....
Check Stock

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

Evomosa Motorcycle Taillight Universal Brake Stop Light ATV Tail Light

  • Universal brake light switch fit for Honda Yamaha Suzuki Kawasaki, etc..
  • A simple and affordable universal drum brake switch spring kit.
  • Designed with an extra small and yet effective spring.
  • you really can cut our brake spring to size.
  • When the pedal is pressed, the brake light switch makes contact, and the the brake lights are illuminated.
  • It can be a direct replacement for most brake pedal switches.
Check Stock

Powerbuilt 648633 Internal Snap Ring Pliers , Red

  • For spreading snap or lock rings retaining parking brake adjuster cams to brake shoes, attaching pedals to shafts, inside transmissions.
  • Knurled outer jaw surface for positive grip on ring.
  • For spreading snap or lock rings retaining parking brake adjuster cams to brake shoes.
  • Also attaches pedals to shafts, inside transmissions, etc.
Check Stock

Acouto Brake Lever Pedal for Pit Dirt Bike 50cc 110cc 125cc Rear Hydraulic Brake Lever Pedal and Spring Rear Brake Pedal Foot Lever Replacement

  • Fitment---- Brake Lever Pedal is suitable for most Chinese import Pit / Dirt bikes with hydraulic brakes. For use with hydraulic brake systems. The brake pedal lever is produced according to the original 1:1 original version, the key positions are precise and the lines are perfect.
  • Stable Performance---- High level of accuracy and sensitivity, enhance safety of your vehicle. Exquisite workmanship, stable performance and high reliability.
  • Good Replacement---- Easy and quick installation, it can be used with hydraulic brake systems. A direct replacement for the old or broken rear brake pedal foot lever, great match to your vehicle.
  • Professional Manufacturing---- Pit Bike Brake Lever Pedal is based on strict quality control, precise design, standard manufacturing, accurate size, light weight design, stable performance work and improved durability.
  • Quality Assurance---- As a professional seller, high quality products and services have always been what we stick to. Every Lever Pedal has passed the quality inspection before leaving the factory. Please confirm whether the product is suitable before purchasing.
Check Stock