Reviews Brake Pad Tool

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

2 Pairs Road Brake Pads with Installation Tool Caliper Brake Blocks 50 mm

  • 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry conditions.
  • Size: the road brake pad is about 50 mm/ 1.97 inch in length.
  • Each piece has a nut and a spacer, it's easy to remove and install with the tool.
  • V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
  • Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
  • Each pair c brake pad has left and right part, without front and rear, every piece brake pad has a text mark.
  • Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
  • Come with the lightweight tool for easy installation.
Check Stock

Kent. 20 Girls Trouble Aqua/black Bicycle

  • 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry....
  • Size: the road brake pad is about 50 mm/ 1.97 inch in length.
  • Each piece has a nut and a spacer, it's easy to remove and install with the tool.
  • V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
  • Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
  • Each pair c brake pad has left and right part, without front....
  • Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
  • Come with the lightweight tool for easy installation.
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

ABN Brake Drum Tool Kit 15-Piece Service Brake Kit with Spring Pliers Brake Spoons Pad Gauge Brake Spring Tool

  • PROFESSIONAL GRADE AUTOMOTIVE TOOLS: The ABN 15-piece Drum Brake Service Kit is designed to allow you to remove and replace worn and broken brake parts and to make it easier to reach other parts.
  • These rear brake tool sets are designed to be used on most foreign and domestic cars and trucks.
  • SERVICE YOUR VEHICLE BRAKES: Whether you are a seasoned mechanic or a home mechanic, this automotive tool set allows you to service your vehicle brakes by making it easy to replace springs, check your pads, and reach other parts of the drum brake system.
  • EASY TO USE: The spring installer, remover, and retainer tools help to adjust brake springs safely to get to deeper parts of your brake system while the various adjustment spoons help you adjust clearance between the drum brake and brake shoe.
  • The 8 brake lining thickness gauges help you to identify thickness levels to know when its time to change your pads.
  • BUILT TO LAST: Constructed of heavy-duty metal, these brake tools are designed for durability and longevity.
  • Each standard sized brake adjusting tool has a chrome finish to protect from rust and corrosion.
  • The spring puller tool, spring installation tool, and spring retainers have ergonomic handles for comfort when using.
Check Stock

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

  • Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
  • YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
  • Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....
Check Stock

Segomo Tools 360 Degree Swivel Joint Slip Resistant Heavy Duty Brake Pad Spreader Tool | Brake Compression Tool | Brake Pad Tool | Disc Brake Pad Spreader | Brake Caliper Tool - BPST01

  • [ Do The Job Quickly ] This brake pad spreader is ideal for compressing inner brake pads and resetting pistons for fast break pad replacement..
  • [ Comfortable To Use ] Tighten by hand with the built-in easy to turn slip resistant comfortable knob and threaded driver..
  • [ Will Last In Time ] Our brake tool is made from high carbon steel and chrome vanadium mix for added strength and corrosion resistance..
  • [ Be Precise ] 360 degree swivel joint of our brake spreader is designed for even and precise compression force..
  • [ Versatile Use ] Compatible with domestic cars and light trucks and is ideal in tight areas where a C-Clamp won't work. HOW TO USE: 1 - Use your old brake pad in conjunction with this brake pad spreader tool to compress the piston. 2 - Open the brake master cylinder cap before compressing and monitor the fluid level so it does not overflow. 3 - After changing the brake pads, start the vehicle and pump the brakes before driving..
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

Acymner 24PCS Disc Brake Caliper Tool Kit | Heavy Duty Disc Brake Piston Caliper Compressor Rewind Tool Set for Brake Pad Replacement Reset, Fits Most American European Japanese Autos (Blue)

  • Durable Material: This disc brake caliper tool set is made of 45# carbon steel with rust-proof blasted finish, all components of our brake caliper compression tool are designed for repeated use with high quality materials. Hand thrust bolt has magnetic design to prevent disc adapters from falling off..
  • Easy Operation: The brake caliper tool also includes 2 hand thrust bolt assemblies(right & left). For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4 wheel drive disc brake vehicles..
  • A Complete Caliper Compression Tool: This brake tool kit includes right and left handed thrust bolts, 2 retaining plates, 18 disc adapters,1 pair of gloves and a convenient carry case for secure storage, meet most of your adaptation needs..
  • Universal Compatibility: The heavy duty brake caliper tool kit includes 18 adapters fitting most of vehicles makes and models including American, European, and Japanese..
  • Storage Case: The brake caliper compression tool is packed in a heavy-duty case with precision-sized compartments for every piece - great for st....
Check Stock

LAJIAOZ Stainless Steel Car Brake Caliper Press Tool,Compressor Brake Wrench Can 360 Degree Ratchet Swing for Car Brake Repair and Replace

  • ★Function:this car brake caliper press tool has a wide range of uses,suitable for most automotive,it is also suitable for single piston and double piston floating calipers, please check your brake caliper size first before purchasing..
  • ★Design:the piston spreader tool is designed to 360 degrees swing , so the spreader can be placed any position and the tool can be used from any direction, thickened and reinforced pad and comfortable handle.
  • ★Material:the ratchet brake pad spreader is made of stainless steel,high strength and durable and the handle is made of rubber, which is very comfortable to grasp.
  • ★Size:The brake caliper press tool total length is about 10.7''/271mm, the retraction supports about 1.3''/33mm, and the spread supports about 2.52 ''/64mm,see the picture for detai.
  • ★We are specialized in producing various tools, please go find all kinds of tools fittings you need in LAJIAOZ store .Customer satisfaction is our top priority,if there anything missed or broken,pls let us know,we'll reply within 24 hours.
Check Stock

Dorman 20787 Brake Pedal Pad Compatible with Select Models , Black

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 20744 Brake Pedal Pad Compatible with Select Acura / Honda Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 20753 Brake Pedal Pad Compatible with Select Ford / Lincoln / Mercury Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock