Reviews Brake Pad Installation Tool Set

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

2 Pairs Road Brake Pads with Installation Tool Caliper Brake Blocks 50 mm

  • 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry conditions.
  • Size: the road brake pad is about 50 mm/ 1.97 inch in length.
  • Each piece has a nut and a spacer, it's easy to remove and install with the tool.
  • V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
  • Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
  • Each pair c brake pad has left and right part, without front and rear, every piece brake pad has a text mark.
  • Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
  • Come with the lightweight tool for easy installation.
Check Stock

Kent. 20 Girls Trouble Aqua/black Bicycle

  • 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry....
  • Size: the road brake pad is about 50 mm/ 1.97 inch in length.
  • Each piece has a nut and a spacer, it's easy to remove and install with the tool.
  • V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
  • Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
  • Each pair c brake pad has left and right part, without front....
  • Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
  • Come with the lightweight tool for easy installation.
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

Acouto Brake Pad Thickness Tool Car Brake Pad Tester Vehicle Brake Pad Thickness Gauge Brake Pad Lining Measure Tool Automotive Measurement Brake Shoe Gauge

  • 6mm / 0.2in---- This brake pad thickness tool is designed for brake pads (IV, V category) with 6mm / 0.2in thick base plate. This car brake pad tester is suitable for internal and external brake pads, with 1.5mm marking and calibration check.
  • Professional Design---- The slender design allows the tool to position the back of the lining plate, so that the probe can measure the distance between the bottom of the lining plate and the brake disc.
  • Practical Tool---- This brake pad thickness gauge is an ingenious tool that saves time, which is essential to any vehicle. Measure the brake pads of the vehicle without removing the wheels.
  • Easy to Use---- The brake pad lining measure tool is easy to operate and use, align the brake pads and press to measure, which is very convenient and highly practical.
  • Customer Said---- I do not use anything else when I inspect brakes on the vehicle. The tool is so simple to use and to read that anyone can do it the first time. Is that it removes the backing plate measurement of the brake pad and give you the real measurement of the pad only.
Check Stock

Dorman 20787 Brake Pedal Pad Compatible with Select Models , Black

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

  • Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
  • YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
  • Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....
Check Stock

OEMTOOLS 25252 Automatic Slack Adjuster Release Tool and Wrench, Slack Adjuster Tools for Big Truck, Trailer Brake Adjustment Tool, Hand Tools for Mechanics

  • SLACK ADJUSTER TOOLS: Our slack adjuster tool set is designed to aid in the installation and servicing of Meritor-brand air braking systems on heavy-duty trucks, long-haul trucks, and trailers.
  • Brake adjustment tool simplifies brake service.
  • CONVENIENT FEATURES: The slack adjuster wrench tool comes with a 5/16 inch double-square head and a built-in offset ratcheting mechanism that provides extra clearance for hands and knuckles.
  • Ratcheting brake tool speeds up installation and service.
  • EASY TO USE: This Meritor slack adjuster features a side-mounted forward and reverse lever, allowing for quick direction changes without removing the brake adjuster tool from the slack adjuster.
  • Convenient hand tools for any mechanic tool set.
  • HANDS-FREE OPERATION: The fork-end slack tool fits securely under the pull pawl for hands-free operation to release the tension button.
  • Truck slack adjuster fork-end tool retains tensioner release button securely without prying or causing damage.
  • COMFORTABLE TRUCK BRAKE TOOLS: Our double-square offset reversible truck tool wrench comes with an EZ grip handle fo....
Check Stock

Dorman 20744 Brake Pedal Pad Compatible with Select Acura / Honda Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Acymner 24PCS Disc Brake Caliper Tool Kit | Heavy Duty Disc Brake Piston Caliper Compressor Rewind Tool Set for Brake Pad Replacement Reset, Fits Most American European Japanese Autos (Blue)

  • Durable Material: This disc brake caliper tool set is made of 45# carbon steel with rust-proof blasted finish, all components of our brake caliper compression tool are designed for repeated use with high quality materials. Hand thrust bolt has magnetic design to prevent disc adapters from falling off..
  • Easy Operation: The brake caliper tool also includes 2 hand thrust bolt assemblies(right & left). For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4 wheel drive disc brake vehicles..
  • A Complete Caliper Compression Tool: This brake tool kit includes right and left handed thrust bolts, 2 retaining plates, 18 disc adapters,1 pair of gloves and a convenient carry case for secure storage, meet most of your adaptation needs..
  • Universal Compatibility: The heavy duty brake caliper tool kit includes 18 adapters fitting most of vehicles makes and models including American, European, and Japanese..
  • Storage Case: The brake caliper compression tool is packed in a heavy-duty case with precision-sized compartments for every piece - great for st....
Check Stock

Dorman 20753 Brake Pedal Pad Compatible with Select Ford / Lincoln / Mercury Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 20729 Brake And Clutch Pedal Pad Compatible with Select Ford Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Shimano BR-T4000 Rear V-Brake, Black

  • ...ELAPCO bike brakes are made from native rubber which is harmless and produces less noise than other pads. They are designed with slots so the brake provides better grip in mud and water.
  • ROAD BIKE BRAKE PAD PACKING: Package containing two pairs of 50MM C shaped break pads for bicycle with a lightweight tool for easy installation. We embodied right or left so that you feel easy for installation and for use..
Check Stock