Reviews Brake Fluid Level Sensor Kit

CYCOBYCO Avid Bicycle Brake Bleed Kit for All SRAM Series

  • Drip-free bleeding kit for All hydraulic SRAM disc brakes.For example Sram Guide R, RS,RSC,Level T TL ,DB1, DB3,DB5,Bleeding Edge Tool,Guide Ultimate/Level ULT/TLM/TL RED eTap HRD.
  • Hydraulic Disc Brake Bleed Kit for All Avid Series.For example Juicy 3/5/7/Ultimate, Elixir 1/3/5/7/9/R/CR/MAG,Code R/Code 5,XO,XX,WorldCup.
  • Compatible Formula (All Series) R1, RX, K18, K24, ORO, THE ONE, FR, MY10.
  • BIKE BRAKE FLUID- Without DOT5.1 brake fluid..
  • Keep Your Bicycle Brakes Working Well - Breathe new life into your bike's hydraulic disc brakes..
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

ZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen

  • ...h the type of brake fluid, the initial default is DOT3, and each time the LED from low to high turns on three times, one brake fluid is switched. If you want to use one of the brake fluids, when the LED light is in the brake fluid type gear, please release the top button when it flashes twice, and insert the bottom sensor plug into the brake fluid (brake fluid test pen 2/3 ), and you will understand percentage of water in your vehicle’s brake fluid.
Check Stock

OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle w/ Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding (Packaging May Vary)

  • RELIABLE BRAKE BLEEDING TOOL: Our brake fluid bleeder kit features a reliable magnet for one-man operation.
  • Designed for use on calipers, wheel cylinders, and master cylinders to give you the most effective brake line bleeder kit for your budget.
  • NO MESS BRAKE BLEED: Get a tight fit over calipers with our tapered fittings and transparent brake bleeder hose of our brakes bleeder.
  • The transparent brake bleeder tubing ensures that you’ll know when the brake line is running clear and air-free.
  • ONE MAN OPERATION: No need to use the two-person method for your brake bleed.
  • Attach the one person bleeder's reservoir to the rotor or similar metallic vehicle surface with the strong magnetic attachment and pump the brake.
  • DURABLE BRAKES BLEEDING KIT: The quality construction of our 2 piece design gives you a durable no-mess operation.
  • Bleed brakes while keeping everything clean of caustic brake fluid.
  • Our handy reservoir makes disposal of brake fluid quick and easy.
  • FITS MOST VEHICLES: Our specially tapered fittings work on most vehicles.
  • The hoses hold firmly to the durable brake bleeder bottle and tapered fittings to create a no-mess operation that keeps your components clean of brake fluid.
Check Stock

CATUDIY Automotive Brake Bleeder Kit with Fluid Transfer Pump, Brake Fluid Oil Extractor for Cars Electric Brake System Bleeding Tools with Master Cylinder Adapter Pressure Adjustable 0.6~3bar 110V

  • ⛽【Professional & Widely Use】This brake fluid extractor automotive is used to empty and fill brake fluid in the cars' brake and clutch equipment, while effectively avoid generating air bubbles during the process thanks to its pulsating brake system. We offer a full line of master cylinder adapters with this equipment, available for all vehicles in European, US, and Asian.
  • ⛽【Secure & Reliable】The brake bleeding tools come with a pressure gauge for better observing the fluid exchange pressure value. Also, The oil change pump used to fill the brake fluid reservoir is of pressure monitoring, which will automatically switch itself if cannot build pressure or the pump pull in air. CATUDIY promises 3-year warranty for damage caused by non-human factors.
  • ⛽【Easy & Time-Saving】This brake pressure bleeder tool is very simple to use and can be operated by one person. There are 4 pumps that can change the brake oil in the meantime. Because of its built-in working pressure bleeder pump, you don’t need to connect extra break bleeder vacuum pump kit.
  • ⛽【2 Power Supply Modes】The brake bleeder kit one....
Check Stock

OEMTOOLS 25136 One Man Brake Bleeder & Vacuum Pump Test Kit Useful Tool for Automotive Tune-Ups Diagnosis & Testing One-Person Brake Bleeding

  • WIDE APPLICATION: This brake bleeder kit is ideal for a wide variety of automotive applications, including bleeding brake fluid and changing power....
  • VACUUM BRAKE BLEEDER: With the hand vacuum pump, there's no need to have an assistant in the car pressing the brake during brake bleeding.
  • SAFE BRAKE SYSTEM BLEEDING TOOLS: Our brake fluid bleeder kit is the safest, easiest way to bleed brakes without an assistant.
  • VERSATILE VACUUM BLEEDER: Works on any kind of vehicle with bleeding screws.
  • Great automotive and motorcycle brake bleeder kit.
  • Vacuum gauge scaled in inches and centimeters of mercury (Hg).
  • (2) lengths of brake bleeder hose (2 foot long 1/4 inch....
Check Stock

Mission Automotive 16oz Brake Bleeding Kit - Easy Use One Person Brake Fluid Bleeder with Magnet Mount and Hanging Lanyard - for Car and Motorcycles Brake Systems 16oz Fluid Capacity

  • Brake Bleeding Made Easy! Our brake bleeder kit has been designed to make brake maintenance as easy as possible and help you get the job done from your garage without making excess mess..
  • How It Works: It couldn't be easier to use! Just attach the valve on out 12" brake bleeder hose to your brake system open the valve and pump a few times on the brake until the fluid hose is full with no air bubbles.
  • Includes Magnet Mount And Hanging Lanyard: No need to hold the bottle, Just attach to a magnetic metal surface OR use the lanyard to secure the bottle in an upright position to capture the brake fluid..
  • High Quality & Durable: Our brake bleeder kit is manufactured from durable oil resistant plastics with a flexible 12'' fluid tube and extra strong magnet..
  • For Use With All Brake Systems: Easy to use with all types of brake systems including cars, motorcycles, ATVs, dirt bikes, scooters,.
Check Stock

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

Mophorn GO-KART Brake Master Cylinder Kit for 150cc Go Kart Hydraulic Brake Kit Universal Go Karts Brake Kit Kandi Complete Including Master Cylinder, Hose, Caliper, Pad for 150cc

  • High Adaptability: This go-kart hydraulic brake kit is compatible with Hammerhead and Trailmaster karts and other 150cc go-karts. It provides superior performance demanded by off-road enthusiasts..
  • Promised Braking & Cooling: This hydraulic brake kit features heavy-duty stopping power for everyday drivability. Drilled & slotted rotors improve heat dissipation during extreme conditions..
  • Quality Material: The master cylinder of this go-kart brake kit is made of high-performance aluminum, preloaded with DOT3 brake fluid. The brake discs are constructed from high-quality steel, durable and lasting for daily use..
  • Complete Accessories: The go-kart hydraulic brake assembly includes a master cylinder, three brake calipers, three brake hoses, and brand-new brake discs. It comes ready to install, pressurized with brake fluid. Do not worry about bleeding the brakes..
  • Key Parameters: Bolt Spacing of Master Cylinder Brake Pedal: 0.787" / 20 mm.
  • Master Cylinder Mounting Hole: 2.36" / 60 mm center to center. Three rubber brake hoses: 34" / 860 mm, 43" / 1090 mm, 75" / 1900 mm..
Check Stock

FOUR UNCLES 2L Vacuum Brake Bleeder Air Brake Bleeder Kit with 2L Brake Fluid Extractor and 1L Refilling Bottle

  • 【One Person Operation】This brake bleeder bleeds and flushes hydraulic brakes and clutches with a vacuum and is simple to use. Large capacity collection reservoir can contain 2 liters of fluid, also includes an automatic master cylinder refill kit with a 1 liter reservoir (safety cup), which makes changing brake oil easy and simple for one man operation..
  • 【2 Silicon Bleed Hoses】The brake oil bleeder kit includes a 40 inch silicone bleed hose with a universal rubber adapter that used with most standard and ABS brake systems, and a 40 inch master cylinder evacuation hose especially for bleeding brake in master cylinder..
  • 【Efficiently to Bleeding Work】It contains a variable thumb throttle which maintains average air flow rate 2 cfm and a desired brake fluid flow rate. And the fixing ring lock keeps extracting oil continuously, efficiently and quicker..
  • 【Quieter Work】 Built-in Integrated silencer allows the brake fluid to flow quietly through the silicone hose and makes a messy job cleaner, quicker and quieter..
  • 【Convenient & After Sales】Midget size of the N.W is less than 1 kg makes it easy and convenient to operate and carry even for women. And If there is some problem with our products while you receive it, pls feel free to contact us, ....
Check Stock

vbaxy Brake Bleeder Hose- One Way Check Valve Tube Bleeding Tool Kit for Motorcycle Clutch

  • 【Material】: Aluminum body to resist corrosion from brake fluid,using soft tube for easy releasing or loosen.
  • 【One Way Check Valve 】Prevents air being drawn into the system.
  • 【Easy to connect】：Simply and easy to connect with the clips to motorcycle clutch for bleeding..
  • 【Easy to bleed 】: Bleed motorcycle brakes fluid fastly with this brake bleeder hose..
  • 【Remark】:This motorcycle brake bleeder kit looks simple, but really a good helper to get the brake fluid out..
Check Stock

Mityvac 7300 PneumatiVac Air-Operated Fluid Evacuator

  • Features a 2.3 gallon (8.8 liter) capacity air operated fluid evacuator for large jobs.
  • Automatic shut-off valve prevents overfilling.
  • Can be used to extract a wide-range of fluid types from transmission fluid, coolant, brake fluid, gear to engine oil.
  • Reservoir is constructed of durable polyethylene and will not rust or corrode.
  • Kit comes with 5 feet of flexible hose, dipstick tubes and a universal brake-bleeding adapter.
Check Stock

Motive Products Power Bleeder General Motors Kit 0254

  • Kit comes with custom GM caps (1108) and the universal round (1101) and universal rectangular (1105) caps..
  • Uses pressurized brake fluid to force air and old fluid out of your brake lines..
  • Just pour clean fluid into the pressure tank, attach the power bleeder cap to your fluid reservoir and pressurize the system using the built-in hand....
  • The kits are available for a variety of master cylinders..
Check Stock