Reviews Brake Fluid Level Indicator

NEXPEAK Professional OBD2 Scanner NX501 with Brake Fluid Tester Pen

  • OBDII Professional Quality Auto Scanner: The NEXPEAK NX501 is an enhanced OBD II professional auto scanner that allows you to check all engine related fault codes, troubleshoot check engine light alerts, turn-off the Malfunction Indicator Lamp (MIL), and locate bad O2 sensors. It also empowers you to proactively monitor car battery health status, alerting you when it’s time to replace your battery. It’s the perfect scan tool for fixing and maintaining your car, helping you save time and money..
  • Brake Fluid Tester: Quickly and conveniently to check the quality of the brake fluid, read the results in seconds and let you know it the brake fluid need to be change or not. Keep safe driving..
  • Brake Fluid Tester: Easy to operate this brake fluid test pen, press the button and insert the tester into reservoir for one second when the green LED on..
  • OBDII Scan Tool: Wide Array of Compatibility: Accurately read and erase error codes on all OBD2 protocol vehicles with a 16 PIN interface (KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). The NEXPEAK NX501 is compatible with most US vehicles that are model year 1996 or later – including sedans, SUVs, light trucks, and 12V diesels. This is a plug-and-play engine diagnostic code reader (both generic and manufactur....
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

CYCOBYCO Avid Bicycle Brake Bleed Kit for All SRAM Series

  • Drip-free bleeding kit for All hydraulic SRAM disc brakes.For example Sram Guide R, RS,RSC,Level T TL ,DB1, DB3,DB5,Bleeding Edge Tool,Guide Ultimate/Level ULT/TLM/TL RED eTap HRD.
  • Hydraulic Disc Brake Bleed Kit for All Avid Series.For example Juicy 3/5/7/Ultimate, Elixir 1/3/5/7/9/R/CR/MAG,Code R/Code 5,XO,XX,WorldCup.
  • Compatible Formula (All Series) R1, RX, K18, K24, ORO, THE ONE, FR, MY10.
  • BIKE BRAKE FLUID- Without DOT5.1 brake fluid..
  • Keep Your Bicycle Brakes Working Well - Breathe new life into your bike's hydraulic disc brakes..
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

ZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen

  • Function: The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid.
  • the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast..
  • LED lights: 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green (0%), green-yellow (4%). Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid..
  • Convenience: The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. (Requires 1 x AAA/1.5V battery, not included).
  • Quality: The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately dur....
Check Stock

Lisle 38780 22' Square No-Splatter Pad

  • 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
  • Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
  • Porous material allows fluid to quickly pass through into funnel or pan..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check Stock

VXSCAN Brake Fluid Tester, Brake Fluid Liquid Testing Pen for DOT3 DOT4 Vehicle, Automotive Brake Fluid Moisture Tester with 5 LED Indicators

  • ✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
  • ✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
  • ✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
  • ✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
  • ✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..
Check Stock

Brake Fluid Tester Pen with 5 LED Indicators Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • 【What does it do?】 If the moisture content of the car's brake fluid is too high, it will cause the car's brakes to fail, so it is very necessary to have a brake fluid tester. You can check your brake fluid at any time..
  • 【Application range】This brake fluid test pen supports most vehicles with DOT3 DOT4 car brake fluid, and can be used by professionals and individuals.(If you turn on the switch and all the lights are on, please remove the battery and restart).
  • 【Easy to use】This brake fluid test pen has 5 LED indicators to show the water content in the brake fluid. Press the top button and immerse the probe in the brake fluid. After a few seconds, the LED will display the test result. The brake fluid test pen will automatically turn off after approximately 15 seconds of inactivity. (Without battery).
  • 【Reminder】The probe of this brake fluid tester pen is made of high-precision metal material, and the test is accurate. If you need to repeatedly measure, you need to wipe the probe clean before measuring. After you have finished using it, please clean the body and probe of the test pen. This will extend the life of the test pen..
  • 【Friendly service】 Our products are shipped from the US warehouse. If the product you received has any quality pr....
Check Stock

KHTD Brake Fluid Tester Pen, Auto Brake Diagnostic Testing Tool with 5 LED Lights, Compatible with DOT3 DOT4 DOT5.1 Brake Fluid

  • CONVENIENT TOOL: This brake fluid tester pen shape design is a very small and convenient tool to test the moisture of your auto brake fluid. Simply press the button at the top, dip the probe the Testing the water content of your brake fluid dot 3, dot 4 and more will only take few seconds..
  • MULTIPLE TESTING TYPE: The dot 3 brake fluid tester can also be uses for testing the fluids of DOT4, DOT5.1, ENV6 & ENV4. With this one automotive brake fluid tester, you can finish different jobs..
  • EASY TO READ: With the percentage readings next to the LED lights on the brake fluid tester pen, you can simply read the result of water content in your brake fluid. When multiple LED lights are on, the maximum readings shall be the result of the brake fluid testing..
  • PREMIUM QUALITY: This pen brake fluid tester is made of premium nylon raw material more durable to use. （1 AAA battery needed for use, not included in the Pack).
  • QUICK RESPONSE: we are committed to offer good products as well as good services. Feel free to contact us if you have any problems.
Check Stock

Castrol SRF Racing Brake Fluid - 1 Liter 12512

  • Avoid fluid contact with brake lining or painted surfaces.
  • Follow vehicle manufacturer's recommendations when adding brake fluid.
  • store brake fluid only in its original container.
Check Stock

Genuine Honda Fluid 08798-9008 DOT 3 Brake Fluid - 12 oz.

  • Avoid fluid contact with brake lining or painted surfaces.
  • Follow vehicle manufacturer's recommendations when adding brake fluid.
  • store brake fluid only in its original container.
Check Stock

Mercedes GENUINE 1L Brake Fluid DOT 4 PLUS Ultra Low Viscosity MB Spec 331.0 NEW

  • One 32 fl oz can of STP 18668 Heavy Duty DOT 3 Brake Fluid.
  • Works in all brake systems using DOT 3 brake fluid.
  • Optimizes performance of disc and drum brake systems for easy car care.
  • Brake fluid protects against brake failure from vapor lock.
  • Automotive oil helps to prevent corrosion in the brake system.
  • Use when needed, following the manual's instructions for a brake fluid flush.
Check Stock

Phoenix Systems (3001-B) Brake Fluid Test Strips, 100 Test Strips Per Tube, BrakeStrip, FASCAR, Copper

  • Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
  • Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
  • Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
  • The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock