Reviews Brake Caliper Bushing

Dorman HW16083 Rear Disc Brake Caliper Bushing Compatible with Select Models

  • Direct replacement - this disc brake caliper bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution - this bushing is a reliable replacement for an original part that has failed due to fatigue.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman HW16156 Front Disc Brake Caliper Bushing Compatible with Select Models

  • Direct replacement - this disc brake caliper bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution - this bushing is a reliable replacement for an original part that has failed due to fatigue.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

Dorman HW16011 Disc Brake Caliper Bushing Compatible with Select Acura / Honda / Isuzu Models

  • Direct replacement - this disc brake caliper bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution - this bushing is a reliable replacement for an original part that has failed due to fatigue.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman HW16514 Rear Disc Brake Caliper Bushing Compatible with Select Chevrolet/GMC Models

  • Direct replacement - this disc brake caliper bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution - this bushing is a reliable replacement for an original part that has failed due to fatigue.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman HW16054 Front Disc Brake Caliper Bushing Compatible with Select Acura / Honda Models

  • Direct replacement - this disc brake caliper bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution - this bushing is a reliable replacement for an original part that has failed due to fatigue.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman HW16097 Rear Disc Brake Caliper Bushing Compatible with Select Infiniti / Nissan / Toyota Models

  • Direct replacement - this disc brake caliper bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution - this bushing is a reliable replacement for an original part that has failed due to fatigue.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

Rear Atv Brake Caliper For Polaris Sportsman 400 500 600 700 800 With Pads Replace 1911075,Brand New rear brake caliper

  • Fit the polaris model : 2003-2005 Sportsman 400, 2006-2007 Sportsman 450, 2003-2006 Sportsman 500, 2007-2009 Sportsman 500 ( Fits the HO & EFI, but will not fit the X2 EFI ).
  • 2003-2005 Sportsman 600, 2002-2006 Sportsman 700, 2007 Sportsman 700 MV/EFI, 2010 Sportsman 700 Military, 2005-2009 Sportsman 800 4×4, 2005-2014 Sportsman 800 6×6.
  • Package included: 1x Brake Caliper，Brand New aftermarket rear brake caliper，Mounting Hole Spacing(center-to-center): 65mm(2.56″), Mounting Hole Size: Fits for 8mm Bolt.
  • OE: 1910690,1911075，A new rear brake caliper, coming with brake pads..
  • The items are the same as the pictures.fits for:polari sportsman,polaris sportsman rear brake caliper,balatas para polaris sportsman 400 4/4,05 polaris sportsman brake rear, polaris eh500ple080 brake caliper ,08 polaris sportsman rear brake caliper seal kit ,2011 polaris sportsman rear brake caliper ,2007 polaris sportsman 500 brake caliper ,tao tao 150 4 wheeler rear brake caliper.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!.
Check Stock

MyParts Disc Brake Caliper Bushing-Front,Rear Compatible With Honda

  • Replacement Disc Brake Caliper Bushing Front EX-L, Coupe Quantity needed per vehicle: 1.
  • Designed with the latest software and manufactured with modern tooling.
Check Stock

MGP Caliper Covers Classic Caliper Cover Fits 2019-2022 Chevrolet, Red Powder Coat Finish Brake Caliper Covers with No Engraving (4-Pack) 14252SCLCRD

  • Engineered To Fit - These MGP Caliper Covers are designed to mount over your front and rear OEM brake calipers. Without logos or engraving, these clean and sleek caliper covers elevate the curbside appeal of your 2019-2022 Chevrolet..
  • Durable Caliper Covers - Made with T-6061 aerospace grade aluminum. High-quality aftermarket aluminum brake caliper covers paired with vehicle specific clips enhance wheel appearance..
  • Easy Installation - Stainless-steel fastening clips makes installing brake caliper covers quick and easy. No adhesives or caliper modification is required. Easy removal for brake service or maintenance. Brake caliper cover installation time: 1 hour..
  • Reduces Brake Dust - The design of our caliper covers substantially reduces brake dust, keeping your wheels cleaner as a brake dust covers for wheels. Results will vary based on the brake pads used..
  • Made in the USA - Manufactured in San Diego, CA, and tested for safety and quality. Designed to divert heat away from your brakes, MGP caliper covers are practical and stylish Chevy accessories..
Check Stock

MGP Caliper Covers 16238SMGPRD Red Brake Covers

  • 2018-2019 TOYOTA CAMRY XLE, XSE, XLE HYBRID: Must have the Electronic Park Brake. Requires 17" Wheels or larger. MGP caliper covers are designed to mount over OEM brake calipers..
  • ALUMINUM MATERIAL: Aerospace Grade Aluminum, no plastic material used. High quality aluminum brake caliper covers paired with vehicle specific stainless-steel clips and powder coated for durability to enhance the appearance of your wheels..
  • SIMPLE & SECURE INSTALLATION: Patented fastening system makes installing brake caliper covers quick & easy. No adhesives or caliper modification is required. Easy removal for brake service or maintenance. Caliper Cover Installation time: 1 hour.
  • MADE IN THE USA: MGP caliper covers are tested for safety and quality to produce the best caliper covers. Our aluminum brake caliper covers are designed to divert heat away from your brakes and out through the top of your calipers. Officially Licensed by major car manufacturers..
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock