Reviews Bracket Mount

Buffalo Girls

  • Two installation methods: This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you..
  • 150 degree adjustment: The rod of wireless bridge bracket mount can be adjusted up and down by 150°. After you install the CPE, adjust the angle of the rod to receive signals of different strengths..
  • Firmness: This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod..
  • Waterproof: The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which makes this bracket mount a good waterproof performance. It’s very suitable for outdoor use..
  • Wide application: This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some AP can also use it..
Check Stock

Mount-It! Height Adjustable TV Wall Mount Bracket with Counterbalance Gas Spring Arm - Full Motion Articulating Design Fits Flat Screens Displays Up to VESA 400x400 mm and 44 Lbs - Silver

  • HEAVY-DUTY STEEL CONSTRUCTION - This Adjustable TV Wall Mount Bracket is built with high-quality aluminum steel alloys and has a powder-coated finish to increase durability. The silver coat is scratch-resistant for a long-lasting attractive appearance. This Wall Mount Bracket can support up to 44-lb. load capacities..
  • SLEEK DESIGN - The Mount-It TV Wall Mount Bracket has built-in secondary features for an easier and more comfortable viewing experience. A six-degree range of rotation allows you to level your mount precisely. The spring arms can be tightened or loosened. A loose spring arm is easier to move if you need frequent adjustments, while a tight spring arm is stiff for a sturdy position, which is ideal for touchscreen or long-term configurations..
  • FULLY ADJUSTABLE - The Mount-It TV Wall Mount Bracket has a dynamic range of motion with large height adjustability. It also has a massive rotating and pivoting domain to suit your preferred TV-viewing position. It can swivel over 180 degrees and tilt 30 degrees. Adjust your TV according to your most comfortable viewing position..
  • VERSATILE TV MOUNT - This Wall Mount Bracket offers you infinite applications for your wall-mounted TV or computer monitor screen. Create your new favorite space by installing....
Check Stock

1 Pcs Replacement Wall Mount Bracket Soundbar Speaker Compatible with AH61-03768A HWF450 HWFM45 | #AA123DL

  • You Purchasing 1 Pcs Replacement Wall Mount Bracket Soundbar Speaker Compatible With AH61-03768A HWF450, HWFM45.
  • Wall Bracket Mount: AH61-03768A soundbar wall mount are designed for Samsung soundbar, easy to install, long lasting | Save Space: Wall mount bracket....
  • Compatiblity: This speaker wall mount suitable for Samsung HW C450, HW-E450, HW-D351, HW-D570, HT-WS1G, HW-E350, HW-E450 mount, HW-F450, HT-SB1G,....
  • Easy to Install: Soundbar wall mounting bracket, quick and easy to fit, bring you maximum convenience | Material & Occasion: Metal Speaker brackets....
Check Stock

FIRESTIK Trunk Lip Mount w/18ft Fire-Ring Coax Black MK748R

  • Antenna Mounting Base: International standard NMO Mount connector,Suitable for CB/HF/VHF/UHF NMO antennas.
  • [4M(13ft) RG58 Coaxial Cable] NMO TO PL-259(UHF male) Plug RG58 Coaxial Cable,Suitable for mobile radio with SO239(UHF Female) Connector.You can also....
  • [Stainless Steel L-Bracket]L-Bracket makes the antenna mount to be better anchored to the surface hosting the mount,Easy to install..
  • NMO TO PL259 CABLE Work for Motorola Yaesu Kenwood Icom Vertex Blackbox HYT Hyte mobile radio..
  • Packing include: 1*Fix Bracket Lip Antenna Mount with 13Ft RG-58 Coax Cable.
Check Stock

Motorized Bicycle Offset Wide Frame Chopper Mount Kit

  • SOLUTION FOR CHOPPER BIKES: The Speed Demon Off Set Chopper mount is the solution to those difficult chopper bike builds. Making engine mount fabrication a thing of the past, this bracket will sit in your frame and provide a mount for your two stroke engine. No welding required, it's all bolt on!.
  • HEAVY DUTY: Constructed of laser cut high grade steel, the bracket is designed to bolt directly to your frame and secure your engine. It's compact design takes very little space in your frame so that you have extra space for any accessory you want to instill along side your engine kit..
  • EASY INSTALLATION: Installation is a breeze, just use the supplied u-bolts and clamp your bracket to your chopper bike and install your engine directly to the bracket. It's that simple!.
  • UNIVERSAL FIT: This chopper mount kit is designed to work with most standard 48cc, 60cc, 66cc and 80cc 2-stroke engines as well as most chopper style bikes such as the OCC Schwinn Bikes, Micargi Jaos, Micargi Prado Deluxe, Micargi Mustang GTS, and many other chopper frame style bikes!.
  • PACKAGE INCLUDERS: 1x Speed Demon Engine Bracket, 2x U-Bracket Mounts, 1x V-Bracket Mounts, 2x Vibration Dampening Hoses, 1x Bag of Nuts and Washer.
Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

Audiovox VH125R RCAVH125N 4-Feet Antenna Bracket and Hardware Outdoor, 2-Pack

  • Audiovox Wall Mount Bracket,vh125n,044476060779,audiovox Network Accessories, network Accessories, networking, audiovox Corporation.
  • Antenna pole with wall mount bracket 4 2 pack.
Check Stock

CURT 58300 Vehicle-Side Trailer Wiring Harness Mounting Bracket for 4-Way Flat

  • STANDARD FIT. This trailer wiring mounting bracket is designed to securely mount virtually any industry-standard 4-way flat connector.
  • FLEXIBLE MOUNTING. The bracket features a simply friction fit design to accept a variety of trailer wiring harnesses. It allows you to mount the wiring harness onto your vehicle or trailer hitch, whichever is most convenient.
  • HIGH-STRENGTH. This trailer wiring harness bracket is made from solid steel to provide plenty of strength for a solid mount and to remain fixed in spite of vibrations while towing. The steel body will not crack like plastic alternatives.
  • CORROSION-RESISTANT. To face the weather and elements with ease, this trailer wiring bracket is covered in a black powder coat finish, helping to resist rust for long-lasting strength.
  • EASY TO INSTALL. To install this mounting bracket for vehicle-trailer wiring, you can bolt it directly onto your vehicle using the top screw holes, or you can pair this bracket with the CURT 57204 for a convenient, no-drill, tube clamp mount.
Check Stock

Mounting Dream TV Mount Fixed for Most 42-70 Inch Flat Screen TVs TV Wall Mount Bracket up to VESA 600 x 400mm and 132 lbs - Fits 16 /18 /24 Studs - Low Profile and Space Saving MD2163-K

  • ...ch, like general 42, 43, 50, 55, 65, 70, flat screen or curved TV up to 132 LBS. Flat TV mount fixed on wall is designed for TV VESA/mounting hole spacing of 600x400mm/500x300mm/400x400mm/400x300mm/400x200mm/300x300mm/200x300mm/300x200mm/200x200mm/200x100mm. TV wall bracket work for most LED OLED LCD, like Samsung/LG/TCL/Sony/Vizio/Hisense etc. large screen TV. TV mounting bracket fit 16”, 18", 24" wood stud and brick/concrete wall..
  • [Low Profile TV Mount] Ultra slim TV mount makes your TV 1. 1” to the wall, narrow gap and greatly saving space Flush TV mount can blend TVs in with any décor, with its extra slim profile and very much of a streamline look. Search MD2361-K for 1.1” flush profile smaller TV mount. Search MD2868-LK for the tilt version TV mount..
  • [Easy Wall Mount for TV]TV wall holder, with classic pulling straps design, quick release and lock TV breezily, no screwdriver needed. Combined pre-labeled hardware kit with clear instruction and bubble level, mounting TV bracket in less than 30 minutes. (Concrete Anchors available on request. Anchors Specifications：φ10x50mm) Search MD2351 for an even easier TV mount..
  • [Heavy Duty TV Hanger] TV mounting bracket with solid 24 inch wall p....
Check Stock

Mounting Dream TV Mount Fixed for Most 26-55 Inch LED, LCD and Plasma TV, TV Wall Mount TV Bracket up to VESA 400x400mm and 100 LBS Loading Capacity, Low Profile and Space Saving Flat Mount MD2361-K

  • [ Universal TV Mount ] Fixed TV wall mount designed for most 26-55" flat screen or curved TVs up to 100 LBS. Basic TV mount working with TV/Monitor VESA from 75x75mm to 400x400mm, like general 26, 32, 42, 43, 50, 55 inches Samsung/TCL/LG/Sony/Vizio/Insignia LCD, LED, OLED TVs. Flat TV mount bracket can be installed on 12”, 16'' spacing stud, or brick/concrete wall. Also ok to work as monitor mount. (Concrete anchors sent separately per request). Search MD2361-32 for 24”/32” stud spacing..
  • [ Low Profile TV Wall Mount ] Narrow gap between this TV bracket and the wall, 1.1” in number, very much of an ultra slim TV mount. Flush TV mount saving space with super sleek look, blending TVs in with any décor..
  • [ Heavy Duty TV Hanger ] TV mounting bracket with solidly one-piece wall plate, ok to hold TVs up to 100 LBS. Wall mount bracket for TV by advanced auto-welding robot, shaped without any potential human error. (Note: this TV Mount is NOT for drywall alone installation) Search MD2163-K for heavyweights, bigger version of MD2361-K flush wall mount..
  • [ Easy Wall Mount ] Combined pre-labeled Hardware kit with clear instruction and bubble level, mounting TV brackets in less than 30 minutes. Classic pulling straps lock design for TV quick release or....
Check Stock

Ueevii Universal Wireless Bridge Bracket Mount, Pole and Wall-Mounted Mount for Outdoor Point to Point AP Access Point Client Bridge CPE

  • Two installation methods: This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you..
  • 150 degree adjustment: The rod of wireless bridge bracket mount can be adjusted up and down by 150°. After you install the CPE, adjust the angle of the rod to receive signals of different strengths..
  • Firmness: This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod..
  • Waterproof: The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which makes this bracket mount a good waterproof performance. It’s very suitable for outdoor use..
  • Wide application: This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some AP can also use it..
Check Stock

Mount-It! Low-Profile Large TV Mount | Flush TV Wall Mount | Ultra-Slim Fixed TV Mount for 42-70 in. Screen TVs | VESA Compatibility up to 800x400 | 220 lbs Capacity

  • FIXED LOW PROFILE TV MOUNT - Big Screen TV mounting bracket designed for large screen TV's & monitors ranging between 42 - 70 inches. Ultra-slim TV mount design sits a mere 1 inches off the wall with cable management cutouts.
  • SECURE TV WALL MOUNT - The lower bar mount and TV VESA bracket can be pad-locked (not included) together after the TV is set and centered along the bracket to secure the perfect placement and positioning. Wall mount can be anchored to 8, 16 or 24 inch spaced studs.
  • HEAVY DUTY STEEL WIDE BRACKET - Flush mount Large TV bracket attaches to the included VESA pattern. Compatible VESA measurements: 850x450, 800x400, 750x450, 700x400, 600x400, 600x300, 600x200, 400x400, 400x300, 400x200, 300x300, 300x200, 200x200, 200x100, 100x100. The mount can hold a maximum weight capacity of 220 Lbs.
  • QUICK & EASY INSTALLATION - The included mounting kit comes complete with simple instructions, integrated bubble level and hardware. Mount-It! TV mounts work with all major TV brands including Samsung, Sony, TCL, Vizio, Hisense & more.
  • TRUSTED U.S. BRAND - Backed by a multi-year warranty and supported by our expert, US-based, customer satisfaction team we will be happy to answer any....
Check Stock

Mounting Dream Long Arm TV Wall Mount for Most 37-75 inch Flat Curve TV, Long Extension to 32” Full Motion Corner TV Mount TV Bracket Swivel Tilt, Articulating Mount for 16-24” Stud, 100lbs MD2285-LB

  • [ Ultra Long Arm TV Mount ] TV Bracket comes with 32 inch long extended articulating arm, leading to greater range of motion and increased flexibility, especially for large screen TV. When fully retract, this wall mount for TV is merely 2.8” from wall, surely keeping slim and sleek. Say, always ok to work as corner TV mount or just a universal TV mounting bracket on flat wall, your choice..
  • [ Versatile TV Wall Mount ] The 32 inch long extension arm makes this product a true full motion TV bracket. For up to 75 inch TV, this TV hanger, MD2285-LB, could do 180 degree smooth swivel, exactly swinging left 90° or right 90°. Well, by meaning “full”, this mount comes with other two common articulating mount features. The mounting plate can be tilted 5° up or 12° down, much broader range than small angled TV mount could do. Also, TV plate can be adjusted after installation, by leveling ±3°.
  • [ Universal TV Bracket ] This swivel TV mount supports 37-75 inch flat screen or curved TV with standard VESA pattern from 200x100mm to 600x400mm, like general 42, 43, 50, 55, 65, 70, 75 inches Samsung/TCL/LG/Sony/Vizio/Insignia LCD, LED, OLED TVs, name it. And it fits concrete/brick wall (anchor needed), as well as 16”, 18”, 24” spacing wood stu....
Check Stock