Reviews Bosch Router Fence Guide

Dremel 231 Portable Rotary Tool Shaper and Router Table- Woodworking Attachment Perfect for Sanding, Shaping, and Trimming Edges

  • CONVENIENT: Quick-change template guide adapter for fast toolless change.
  • FUNCTIONAL: The Bosch RA1128 Router Guide Features a Versatile Array of Six Popular Router Template Guides Including Large and Small Dovetail Router Guides and Two Radius Hinge Guides.
  • USE WITH: Works with Bosch routers and plunge bases for Bosch palm routers.
  • VERSATILITY: The RA1100 interface piece allows the template guide adapter to accept common threaded template guides and reducer inserts that fit into a 1 to 3 8 Inches counter bore.
  • ORGANIZE: Template guides come in a rugged, portable carrying case for worksite organization.
Check Stock

Bosch RA1171/RA1181 Feather Board # 2610927685

  • Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease.
  • The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing.
  • Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy.
  • For added versatility, it’s pre drilled to fit a variety of routers.
  • Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback.
  • They’re fully adjustable to fit a variety of work pieces.
  • Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge.
  • Cleanup: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris.
  • The dust collections ports fit standard 2 1/2 inch vacuum hoses.
  • Convenience: Featuring a dual outlet switch with 6 feet power cord.
  • Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims.
Check Stock

Bosch Cabinet Style Router Table RA1171 , Blue

  • Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease.
  • The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing.
  • Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy.
  • For added versatility, it’s pre drilled to fit a variety of routers.
  • Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback.
  • They’re fully adjustable to fit a variety of work pieces.
  • Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge.
  • Cleanup: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris.
  • The dust collections ports fit standard 2 1/2 inch vacuum hoses.
  • Convenience: Featuring a dual outlet switch with 6 feet power cord.
  • Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims.
Check Stock

POWERTEC 71536 Deluxe Router Table Fence System 3-3/8” Tall 24\ Long

  • Rockler’s Trim Routing Table: The Rockler professional router tables can quickly attach to the edge of a bench, a table, and a piece of plywood or any flat surface. Get more out of your compact router with a rugged, adjustable trim router table that goes anywhere!.
  • Compatibility: Our Router table Rockler is perfect for small applications such as routing round-overs, chamfers, and small dadoes in your shop or at the job site. The wood router tool table is perfect for providing better control of hand held routers..
  • Fits Most Popular Trim Routers: This router tables woodworking is compatible with Bosch Colt, Porter Cable 450 and 7310, DeWalt DW 611, and other popular trim routers – or drill the base to fit your specific router.
  • Easy To Use: Our table mount router sets up quickly, and it's just as easy to detach your router from the table without tools. Use your router tabletop with the included 1/4" thick acrylic base to do freehand work like a standard router..
  • What’s Included? This portable router table includes a high-visibility bit guard, ¼” thick x 5-3/4" diameter acrylic base, fence, T-Knobs let you make quick fence adjustments. This is one of the best router table accessories for your shop!.
Check Stock

Kreg PRS2100 Bench Top Router Table with Essential Accessories

  • INCLUDES: (1) Trim Router Table, (1) Transparent Bit Guard, (1) 1/4" Thick Acrylic Base, (1) Removable Fence, (2) T-Knobs, (1) Dust Port.
  • FUNCTION/EASY TO USE: For use with a trim router as a stationary router table for cutting, leveling, jointing, planing routing, and shaping small to mid-sized stock in your home or workshop.
  • Sets up quickly and the router can easily be detached from the table without tools.
  • COMPATIBILITY: The included router plate is designed with multiple predrilled hole patterns that work seamlessly with most trim routers. Fits DeWalt, Makita, Bosch, Ryobi and Porter Cable.
  • SMALL & PORTABLE: Sized for practical functionality, this compact router table can be easily set up on a workbench, table, shelf or any unoccupied work area of your shop – essentially anywhere you see fit.
  • FEATURES: High visibility bit guard to monitor your work, T-knobs that allow you make quick and precise fence adjustments, and an acrylic insert plate that possesses pre-drilled holes compatible with most trim routers on the market.
Check Stock

(Santa’s Got A) Rocket Sled on Rails

  • PRECISION: The size of the rail coping trolley is 375 x 152mm / 14.5 x 6 Inch, the rail guide coping sled is the router table accessory you need to make rail & style doors, tenons, lap joints. This full featured coping sled has a aluminum base that slides across your router table surface effortlessly. The unit also includes two large and sturdy handles for guiding the sled through the cutter..
  • USAGE: When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails, the rail guide coping sled solves this problem, helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most type of end grain cut on your router table..
  • PRACTICAL: Fix your rail firmly at a 90 degree angle with your router table fence, you can cut your stock into the cleanest and most square shape through the cutter. When narrow rails are often used on the front of the drawer, this sled can prevent your inventory from being immersed or pushed too far, and can also keep your hands away from injury..
  • STABLE: Add a separate sacrifice block in the sled to allowing you to start using your first profile. Sacrificial block is easily replaceable to accommodate different profiles. The abrasive belt can p....
Check Stock

Router Table Coping Sled, Rail Guide Safety Coping Sled Router Table Tenoning Safety Pushing Clamp for Cutting Precise Joints for Cabinet Door Drawer Fronts Carpenters Woodpeckers Woodworking Tools

  • ...e: Our coping sled uses the fence as a reference instead. The rail guide coping sled features a clear acrylic fence for reference which is offset and raised 2″ above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • How It Works: Hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
Check Stock

Flattening Workbenches and Wide Boards with a Router

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock

SKIL 10 Inch Heavy Duty Worm Drive Table Saw with Stand - SPT99-11 & BOSCH RA1054 Deluxe Router Edge Guide with Dust Extraction Hood & Vacuum Hose Adapter, Black

  • Product 1: Legendary worm drive gearing with 3-5/8 inch depth of cut and 30-1/2 inch rip capacity.
  • Product 1: Precision rack and pinion fence system makes fence adjustments quickly and smoothly for accurate cuts.
  • Product 1: Rugged rolling stand with 16 inch Wheels and easy-load handles delivers unsurpassed mobility.
  • Product 1: Dust port elbow contains debris to 1 area for clean-up.
  • Product 2: ADAPTABILITY: The router guide quickly and easily converts into circle guide for making arcs and circles up to 32 inch in diameter.
  • Product 2: MULTI USE: For use with most Bosch routers, the guides cut along the work piece or up to 8 inches in from edge.
  • youll also have the freedom to do edge forming using non piloted bits.
  • Product 2: ACCURATE: Precision fine-adjustment control for accuracy.
  • Product 2: FUNCTIONAL: Keep work area clean with dust collection accessories.
Check Stock

JASPER Model 200 Circle Cutting Guide for Plunge Routers

  • : The Jasper 200 Max router jig guide allows you to cut 256 different-sized, precise, perfect circles from 2 ¼” to 18 3/16” D.
  • : The 200 Max circle cutter router jig is made from high-quality acrylic materials and guaranteed to last..
  • : The circle cutting router guide includes calibration disc for precise centering and pivot pins as well as router mounting hardware to ensure perfect circle cutting paths..
  • : Includes all hardware and mounts quickly to fit over 47 different models of plunge routers from popular brands like PORTER CABLE, BOSCH, DEWALT, MAKITA, RIGID, and many more..
  • : THE JASPER 200 MAX is WOOD MAGAZINES Grade A, Top Tool Circle Routing-Jig. The router circle cutter jig guide is a must have for Speaker Makers, Woodworkers, and DIYers of every kind..
Check Stock

Fulton Rail Guide Coping Sled PRO For Cutting Profiles Into The End Grain Of Your Stock | Ideal for Cutting Precise Clean Joints for Cabinet Door and Drawer Fronts

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock

POWERTEC 71022 6-1/2-Inch Universal Router Plate

  • Features: the 6-1/2” clear universal Router plate is pre-drilled for easy mounting onto most popular routers on today’s market. A unique construction of clear Hardened acrylic means you can easily view your work-piece while you are routing. A 1-3/16” center hole enables use with PORTER-CABLE style Guide bushings. A convenient center pin – for use with a guide Bushing – is included to ensure solid and centered attachment to your router. Its 5/16″ Thick acrylic makes for optimal durability..
  • VERSATILE COMPATABILITY: Accommodates to the following router makes/models: Porter-Cable (690 series, and models 7529, 8529), Bosch (1617, 1618), Craftsman (315 275 000, 315 175 040, 315 175 050, 315 175 060, 315 175 070), Fein (FT 1800), Milwaukee (5615, 5616, 5619), Makita (RF1101), Hitachi (M8V, M-12VC, TR12), Elu (177), DeWALT (DW621, DW616 series, DW625, DW618), Ryobi (R1631K), and other models with like specifications..
  • Applications: allows you to use PORTER-CABLE style Guide bushings for greatly increased precision and ease of use. Porter-cable style Guide bushings not included.
  • please see POWERTEC 71051 to order separately. Great for use as replacement plates, or as an upgrade to your existing router assembly..
Check Stock

Rousseau 2790 Table Saw Stand for Larger Portable Saws (REPLACES: Rousseau Model 2775)

  • Fits Larger Saws: Dewalt DWE 7490, Bosch 4100, Bosch GTS1041A, Makita 2705, Rigid R4513, SawStop JSS.
  • Includes T-Style locking fence for accuracy. Self-Adhesive Tape Measure For Accuracy.
  • Micro Adjust Assembly for Quick & Accurate Saw Positioning.
  • Optional accessories include: Model 2720 Outfeed Table, Model 2790-EXT Extension Table, Model 2790-RXT Router Extension Table.
Check Stock