Reviews Borosilicate Glass Print Bed

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

TENLOG TL-D3 Pro Independent Dual extruder 3D Printer BMG extruder 280 Degree high Temperature Nozzle Silent Motherboard TMC2209 Driver 600W Power Supply Print Size 310x310x350mm.

  • 【Independent Dual Extruder Design】The TL-D3 Pro dual-extruder 3D printer has independent dual-nozzle function, which can not only perform....
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the....
  • 【High-quality accessories】：Multi-language interface (7 languages) color touch screen, built-in self-developed mute motherboard tmc2209 driver,....
  • 【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes..
  • 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
Check Stock

Ceality Glass Bed for CR-10S Pro, CR-X, CR-10 V2, Ender-3 Max, 310x320x4mm, Official Version Build Surface

  • No Edge Curling - Official printer glass bed offered by Creality, its microporous coating on the upper surface can adsorb the model to glass bed surface, no worry of print edges curling..
  • Universal Application - This printer glass plate is well suited for most types of filament including: PLA, ABS, PETG, Nylon, TPU, Polycarbonate, wood and more..
  • Excellent Flatness - Improved borosilicate glass plate provides more flat and more smooth build surface than magnetic mat or pei sheet, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed.
  • This glass bed could be fixed with middle sized clips and wash with alcohol or acetone at room temperature..
  • Compatibility - This printer parts is only applicable with Creality printers as following, CR-10S Pro, CR-10S Pro V2, CR-X, CR-X Pro, CR-10 V2, CR-10 V3 and Ender-3 Max, pls confirm if this glass print bed compatible with your printer..
Check Stock

TL TENLOG TL-D3 Pro 3D Printer Independent Dual Extruder 3D Printer Silent Mainboard tmc2209 Driver 4.3 inch Multi Language Color Touch Screen,Professional 3D Printer,300x300x350mm

  • 【Independent Dual Extruder Design】The TL-D3 Pro dual-extruder 3D printer has independent dual-nozzle function, which can not only perform....
  • 【Upgrade borosilicate glass bed】：TENLOG's upgraded borosilicate glass bed allows the printed product to adhere better without warping. Even the....
  • 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
  • 【High-quality accessories】：Multi-language interface (7 languages) color touch screen, built-in self-developed mute motherboard tmc2209 driver,....
  • 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no....
Check Stock

LulzBot Mini 2 Desktop 3D Printer

  • Maximum print size: 160 mm x 160 mm x 180 mm (6. 3 inches x 6. 3 inches x 7. 08 inches).
  • Tool Head: E3D Titan Aero with . 50mm Nozzle – Compatible with Flexible and Rigid Materials - Maximum Temperature: 290°C (554°F).
  • Heated print bed: borosilicate glass/pei - maximum temperature: 120°c (248°f).
  • Includes 1-year limited with 7-days/week phone and email technical support.
  • Certifications: UL, CSA, ETL, FCC, CE, WEEE, FSF-RYF, OSHWA. Print Volume: 281. 4 inches.
Check Stock

Creality Original Self Release Glass Bed Upgrades for Ender 3 / Ender 3 pro/Ender 5 / Ender 3 v2 3D Printer 235x235mm Build Surface Plate Heated Bed Better Than Borosilicate Glass Accessories

  • New Creality 3D printer Self Realising Glass Bed - Using a special microporous coating help release prints when the build plate cools, and there is no....
  • Prints stick firmly to the bed without any glue or hairspray. Just heat the bed to the temp you usually print PLA, PETG, or ABS, and the print will....
  • Save time and hassle of wiping the build plate of glue, unlike normal Borosilicate Glass. The perfect 3d printers accessories for all Creality....
  • Super Flat for the perfect first layer - Unlike magnetic bed sheet or PEIsticker, which can be tricky when leveling and doesn't work at all....
  • The Self Release Glass Bed is secured to the printer using middle-size clips available at all office supply stores and unlike Magnetic Spring Steel,....
Check Stock

Glass Bed, Upgraded 3D Printer Platform Tempered Glass Plate Build Surface Cover for Anet A8 /A6/ A2/ ET4 (220x220x4mm)

  • BED MATERIAL-100% Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 ℃..
  • BUILD SURFACE TEMPERATURE SETTINGE- PLA: 50-70ºC TPU: 50-70ºC ABS: 100-125ºC (recommended 110ºC) PC: 100-130ºC (120ºC is recommended) Nylon: 90-120ºC (110ºC is recommended) PP: 100-130ºC (120ºC is recommended) PETG: 50-70ºC.
  • SIZE&COMPATIBILITY-Build Surfaces have 4 different size to choose 220x220x4mm Works for Anet A8 /A6/ A2/ ET4,235x235x4MM Works for CREALITY Ender3 300x300x4MM Works for Anet E12 E16 A8PLUS ET5 Artillery SW-X1 310x310x4MM Works for CREALITY CR10.
  • NO EDGE CURLING - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • QUANLITY ASSURANCE-All products in this shop provide free lifetime service.
Check Stock

GO-3D PRINT 235mm x 235mm Borosilicate Glass Plate for Creality Ender 3 Pro 3 Ender 5 3D Printer

  • To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass..
  • Borosilicate Glass Plate, Compatibility: Compatible with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3X, Ender 5.
Check Stock

TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer 300 Degree High Temperature Nozzle,Silent Mainboards TMC2209 Drive,600W Power Supply,Support PVA TPU ABS PLA Nylon,11.8 x11.8 x13.8

  • INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints.
  • THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing.
  • NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work.
  • EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes.
  • BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing.
  • prints can be extracted from the bed by hand following cool down.
Check Stock

TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer 300 Degree High Temperature Nozzle,Silent Mainboards TMC2208 Drive,600W Power Supply,Support PVA TPU ABS PLA,Direct Feed,11.8 x11.8 x13.8

  • INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints.
  • THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing.
  • NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work.
  • EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes.
  • BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing.
  • prints can be extracted from the bed by hand following cool down.
Check Stock

TENLOG Hands 2 Pro Independent Dual Extruder 3D Printer,300 Degree high Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS 8.6 x8.6 x9.8

  • 【Independent Dual Extruder Design】Our Hands 2 Pro Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to....
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the....
  • 【Self-developed Silent Motherboard 】The Hands 2 Pro built-in self-developed silent motherboard tmc2208 driver, which has stronger....
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5....
  • 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no....
Check Stock

Creality Ender 3 Glass Bed Upgraded 3D Printer Tempered Glass Plate Build Surface for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235x235x4mm

  • Compatibility: Our glass bed is applicable for Creality 3D printer Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro and most of the Cartesian style 3D printer with a MK2 MK3 hot bed. Please confirm the size of your printer’s platform firstly..
  • No Edge Curling: The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be sticked on the build surface firmly without glue, avoiding the issue of prints edges curling. Equipped with 4 clips to fix the hot bed..
  • Super Convenient: It is very easy to remove the prints. The surface of our tempered glass bed is a layer of microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools..
  • Excellent Flatness: Upgraded ender 3 build plate with smaller CREALITY logo provides flatter and smoother build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of mold during 3D printing..
  • High Grade Material: Made of 100% Genuine Borosilicate Glass, thick and high quality. Glass bed’s hardness is up to 8 Mohs and is capable to work up to 400 ℃. Using alcohol or acetone to wipe it after repeated use..
Check Stock

Primula Daisy Borosilicate 40oz Glass Teapot with Glass Infuser – For Loose Tea, Bagged and Flowering Teas

  • SET INCLUDES: (1) Daisy 40 oz. Primula borosilicate glass teapot with lid, (1) borosilicate glass infuser.
  • TEA BREWING IN GLASS - crafted from temperature safe borosilicate glass, this Daisy teapot is the perfect choice for tea lovers..
  • INCLUDED INFUSER- the clear borosilicate glass tea infuser ensures a clean, pure cup of tea and allows you to view your tea brewing..
  • EASY TO CLEAN- This teapot, lid and infuser are 100% dishwasher for fast and easy clean up between uses..
  • TEA YOUR WAY – this glass teapot set can easily brew 4 cups of delicious tea, making it perfect for entertaining or as a gift..
  • INNOVATIVE DESIGN - made of extra-tough borosilicate glass, the specially designed spout provides clean, drip-free pours..
  • GREAT FOR GIFTING – Great gift idea for teachers, moms, your significant other and the tea lover in your life. Makes a great gift basket item..
  • FOR LOOSE LEAF, BAGGED OR FLOWERING TEA- choose your favorite type of tea and easily steep it with this teapot..
Check Stock