Reviews Boring Bar Coolant Bushing

BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 3/4" tool with bushing, 1" diameter without bushing.
Check Stock

OXA #4 Quick Change Heavy Duty Boring Bar Tool Post Holder OXA 250-004

  • For use with OXA tool post 250-000. 6-8" swing.
  • Holds 3/8" with bushing (1/2" diameter without bushing).
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter.
Check Stock

AXA #4 QUICK CHANGE HEAVY DUTY BORING BAR CNC TOOL POST HOLDER 250-104

  • For use with AXA tool post 250-100 or 250-111. up to 12" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 5/8" tool with bushing, 3/4" diameter without bushing.
Check Stock

Micro 100 20-0821 Boring Tool - Indexable, 0.330\ Min Bore Dia, 0.177\ Offset, 1/4\ Shank Dia, 3.100\ OAL, Insert Part #50-1100, A04F SCLCR 2 Holder Nomenclature,

  • Coolant through boring bar for right hand boring and facing with 5° approach (lead) angle.
  • Made from precision ground heat treated steel.
  • Coolant through design for improved chip removal.
Check Stock

Sandvik Coromant A06M-SCLCL Round with Flats Shank Steel Boring Bar, 6\ Overall Length, 15/32\ Minimum Hole Diameter, 3/8\ Shank Diameter, 06 Insert Size (Pack of 1)

  • Bars for positive basic shape inserts 7 degree.
Check Stock

Accusize Industrial Tools 3/8'' by 4.33'' Right-Hand Sclcr Coolant Through Indexable Boring Bar with Ccmt Insert 21.51, 2800-0035

  • General purpose boring bar fitted with rhomboidal positive inserts (80°angle) which are free cutting with strong cutting edges..
  • The coolant hole with a diameter range varying between 3/32" and 5/32" in accordance to the bar size allows to cool the cutting edge and remove chips..
  • The inserts is set with a 0° rake angle and an inclination angle shown in the table below..
  • Made of tool steel with nitrogen superficial treatment, Hardness 60 HRC, blackening by PVD coating, thickness 0.0002"..
  • Extreme gloss finish, Bar hardness approximately 45HRC.
Check Stock

Auliuakz Boring Bar Set,9pcs HSS Material 1/2 inches Round Shank Boring Bar Set Machine Tool Accessories

  • Boring Bar Set:Made of high quality HSS material, high hardness, wear resistance and heat resistance..
  • Boring Bar Set:9 kinds of boring bar of different lengths to meet your different needs..
  • Boring Bar Set:Boring bar can be used on boring machine, lathe or milling machine..
  • Boring Bar Set:Excellent workmanship to ensure high accuracy..
  • Boring Bar Set:The handle of boring bar is thicker, more durable..
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

MT2 Boring Shank, Mt2-1-1/2-18- (m10) Manganese Steel Boring Bar CNC Lathe Tool Inch Boring Head Shank Connecting Rod

  • HIGH-QUALITY MATERIALS: The boring bar is made of high-quality manganese steel to improve durability and service life..
  • SCOPE OF APPLICATION: Boring bar for CNC lathes with 1/2 "boring head. It can be used for boring, round, end face, step hole, inner hole end face, cutting inner hole and annular groove on the outer circle, etc..
  • ACCURATE THREAD: The thread of the boring bar is accurate and can be tightly connected with the boring head..
  • EXQUISITE WORKMANSHIP: The connecting rod of the British boring head handle is very smooth, professional and practical appearance design, easy to use..
  • HIGH STABILITY: MT2 bracket is stable, accurate and high stability, very stable during work, and reliable tools..
Check Stock

9pcs 2 Boring Head R8 Shank 1/2 Carbide Boring Bar Set Milling

  • 2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
  • Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
  • Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.
Check Stock

ASZLBYM 5/8'' inch CNC Lathe Indexable Turning Tool Holder with Nickel Plated,CNC Heavy-Duty Metal Lathe Bit Set with Tin Coated Carbide Turning Inserts WNMG431 CNMG431 TNMG331 16ER AG60

  • ◆ UNIQUE: Boring Bar suitable for finishing and semi-finishing, good toughness..
  • ◆QUALITY: Boring Bar Lathe high strength and hardness, durable in use, improved the surface gloss of the cutting pieces.
  • ◆FUNCTION: Boring Bar Set suitable for machining steel, reduce the tool grinding cost and improve the cutting efficiency.
  • ◆APPLICATION: Lathe Tools Set tightly impacted bolt, simple structure, often used for small hole machining..
  • ◆GET: 2 Boring Bar( S12M-SDUCR07 + SDJCR1212H07 ) + 2 Wrench + 10 Carbide Inserts ( DCMT070204 ).
Check Stock

Milescraft 2312 5mm ShelfPinBit - For drilling shelf pin holes

  • Self-centering boring bits in 5 mm diameter.
  • 3/8" Guide Bushing for precise and repeatable shelf pin hole locations.
  • Can be used with Milescraft 1316 CabinetMate or other templates with 3/8" guide holes.
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock