Reviews Bore Finishing Bar

NEW 9 pcs 1/2

  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
  • Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
  • Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Venzo Road Bicycle Bike Adapter Handlebar Flat Bar to Drop Bar Ends - Mountain Bike to Road Bike Type

  • Material: Aluminium 6061 alloy one solid piece lighter and more rigid than welded bars.
  • Intended to Use: Turns a flat bar into an ergonomic drop bar..
  • Drop: 120mm, Reach: 72mm, Bar Bore: 22.2mm, Bar Bore Angle: 10˚.
  • ORDER NOW, WORRY-FREE! We're so confident about the product quality that we can provide a 5-year warranty!.
Check Stock

1/2 Shank 9 Pcs Boring Bar Set Carbide Tipped Bars

  • 3pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3"), 3pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), 3pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 10 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
Check Stock

Accusize Industrial Tools 1'' x 12'' Oal Right Hand S-Mwln Heavy-Duty Boring Bars with Wnmg43 Insert(Oxide Body), 0028-1970

  • Profiling bar for semi-finishing and finishing operations.
  • Boring from light roughing to finishing in small bores.
  • Using 80 degree carbide WNMG inserts negative 5 degree end and side cutting angle.
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 12 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
  • Go Kart Clutch kit：Clutch and bolt & hexagonal wrench.
Check Stock

Haltec GA-255 Large Bore Swivel Foot Air Gauge 360 Degree Swivel 10-150 psi

  • One Haltec GA-255 large bore 360 degree swivel foot air gauge.
  • Nylon slide bar that is calibrated from 10-150 psi in 2 lb units.
  • Features: The foot swivels 360 Degrees for those hard to reach valves..
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

Flex-Hone 5-1/2\ (140MM) 320 Grit Silicon Carbide

  • Designed to work with cylinder bores from 5.000 to 5.600"..
  • 320 grit, EXCELLENT for re-ringing or final bore finishing..
  • Tool can be used with a 1/2" chuck portable drill, air drill or drill press.
  • Made in USA by the one of the best cylinder hone manufacturers, FLEX-HONE..
  • Tool is self centering and is easy to use (email for questions).
Check Stock

Accusize Industrial Tools 1'' by 12'' Rh Sclcr Indexable Boring Bar Plus 10 Pc Ccmt32.5 Carbide Black and Yellow Inserts, Cvd Coating, P252-S408ins

  • Shank Diameter: 1". Overall Length: 12". Using 80 degree carbide CCMT inserts negative 5 degree end and side cutting angle.
  • Boring from light roughing to finishing in small bores. Insert CCMT 32.51 or CCMT32.52 Included & Key Included..
  • Accepts Inserts CCMT 32.51 or CCMT32.52. S16T-SCLCR4. Profiling bar for semi-finishing and finishing operations.
  • Bar hardness approximately 45HRC. Extreme fine gloss finish.
  • Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.
Check Stock

UPANBIKE Mountain Bike Road Bike Handlebar Aluminum Alloy Riser Bar 25.4mm*600mm

  • Fits most kinds of bike,such as mountain bike,road bike and etc..
  • IMPORTANT NOTE:Before ordering, please do make sure to measure and confirm the diameter that you actually need. Thank you..
Check Stock

UPANBIKE Mountain Bike Road Bike Handlebar Aluminum Alloy Flat Bar 31.8mm*620mm

  • Fits most kinds of bike,such as mountain bike,road bike and etc..
  • IMPORTANT NOTE:Before ordering, please do make sure to measure and confirm the diameter that you actually need. Thank you..
Check Stock