Reviews Bonded Rubber Pistons

ABN Adjustable Ratchet Piston Installer Tool, 3in Piston Ring Compressor – Installation Compressing 2.1in to 6.9in

  • EASY PISTON RING INSTALLATION: The ABN 3” Inch Piston Ring Compressor is a ratchet-type lock mechanism with fingertip easy release thumb switch lever, hex spanner, and adjustable safety screws to allow for safe and quick install of piston rings by simple ring compression.
  • DAMAGE-FREE: Perform engine rebuilds and use this compressor for proper installation of the piston and rings in the cylinder without twisting or damaging parts.
  • Perfect fit on the piston and a positive locking action to compress rings and allow installation of pistons into cylinders.
  • WORKS ON VARIOUS PISTONS: Designed for use on the most common automotive piston and ring diameters ranging in thickness from 2.1-inch to 6.9-inch (53mm to 175mm).
  • Small enough to use on small engines such as push mowers and riding mowers.
  • Large enough to use on machine tractor pistons.
  • EASY TO USE: Use an oil lubrication (not included) on ring and piston before compressing.
  • Place piston inside the cylinder, tighten the compressor, lightly tap the piston into the bore with a rubber mallet (not included) while holding downward pressure on compressor.
  • BUILT TO LAST: Constructed from spring steel for maximum strength and longevity that resists corrosion.
Check Stock

Hilitchi 180-Pcs Metric Dowty Bonded Seal Oil Washer Assortment Kit - 10-SIZE: M6 to M24

  • 【✔】High Quality Dowty Type Bonded Seal Washer Assortment Set.
  • 【✔】Set Includes 9 Most Used Sizes: M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 【Metric, Please See Picture 2 for Specific Dimensional Size】.
  • 【✔】Package Quantity: 180-Piece, All of Washers Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
  • 【✔】Bonded seal consists of a metal ring and a rubber gasket. Metal ring done antirust processing, rubber ring generally uses oil resistant NBR or fluorine rubber..
  • 【✔】Bonded washers are used extensively for sealing under the heads of bolts in high pressure applications where coppers washers would be unsuitable. They are often used in hydraulic and pneumatic connections that are subject to extreme pressures..
Check Stock

Shift Rite Transmissions replacement for 68RFE 07-2010 4X4 Transmission remanufactured 6.7L Shift Rite 68RFE

  • Remanufactured 68RFE 4X4 6.7L Transmission.
  • Torque converter is included! Updates to the TC limit valve, Updated UD/OD snap ring, TransGo Shift correction kit and much more!.
  • 1 Year 36,000 Mile Warranty. We offer an extended Warranty 2 Year 50,000 Mile Warranty, or a 3 Year 100,000 Mile Warranty for an additional charge..
  • MASTER KIT (CLUTCHES, STEELS, BONDED PISTONS, OVERHAUL KIT) OEM MOPAR Solenoid Pack & MLPS Cam Plate OEM MOPAR Line Pressure Sensor Pump Gears Updated Welded Rear Planetary Pins (corrects pin walk) Updated Separator Plate Gaskets Sonnax Solenoid Switch Valve and Plug Kit (Reaming Required) Sonnax TC Limit Valve / Sleeve (Reaming Required) Updated Valve Body Resurfacing.
  • CORE CHARGE is $2,500! CALL AHEAD!! THANKS! Phone/Fax: (815) 9 3 5-2 3 5 6.
Check Stock

3” Piston Ring Compressor, Adjustable Ratchet Piston Installer Tool Removal Tool Installation Compressing Capacity 2”to 6.9”,Blue

  • [Adjustable Diameter]Adjustable from 2”to 6.9”,Sprung mechanism for fine control..
  • [Material]Made of spring steel with maximum strength and corrosion resistance life..
  • [Damage-Free] Perform engine rebuilds and use this compressor for proper installation of the piston and rings in the cylinder without twisting or damaging parts.
  •  Perfect fit on the piston and a positive locking action to compress rings and allow installation of pistons into cylinders.
  • [Instructions]Use an oil lubrication on piston and ring before compressing.
  • Place piston inside the cylinder, tighten the compressor, lightly tap the piston into the bore with a rubber mallet while holding downward pressure on compressor..
  • [Function]It is small enough to be used in small engines, such as push mowers and riding mowers, and large enough to be used in pistons of machine tractors..
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

MECCANIXITY Bonded Sealing Washers G1/2 28.5x19x3.4mm Carbon Steel Nitrile Rubber Gasket, Pack of 10

  • The nitrile rubber is bonded by heat and pressure to the outer ring, which holds it in place. This structure increases resistance to bursting, increasing the pressure rating of the seal.
  • Nitrile Butadiene Rubber (NBR): Hardness: 60A.
  • Working Temperature Range: -20°C to 100°C (-4°F to 212°F).
  • Because the bonded washer itself acts to retain the gasket material, there is no need for the parts to be sealed to be shaped to retain the gasket. This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings.
  • The self-centering bonded washers are high-pressure seals that are used in the Mechanical, Hydraulic, and Pneumatic pipelines.
Check Stock

NAMURA NA-10003 Standard Piston Kit for 400EX

  • Namura pistons are made to exact OEM specifications and are direct replacements for OEM pistons with no modifications or dimensional adjustments....
  • Piston kits come with the piston(s) individually wrapped, a set of OEM quality rings packed in their own box, wrist pin(s), and circlips.
  • Namura pistons have MOS2 (Molybdenum/Teflon) skirt coatings, high-silicon aluminum and anodized domes.
  • A, B and C pistons are available to help extend the life of expensive Nikasil, SCEM, Boron Composite and Ceramic Cylinders.
  • Namura rings are made by Riken, the world's largest OEM manufacturer and are the same OEM rings used on more motorcycles and ATV's than any other....
Check Stock

Wiseco (SK1321) 77.25mm 2-Stroke Piston Kit for Polaris Snowmobile

  • Namura pistons are made to exact OEM specifications and are direct replacements for OEM pistons with no modifications or dimensional adjustments needed.
  • Piston kits come with the piston(s) individually wrapped, a set of OEM quality rings packed in their own box, wrist pin(s), and circlips.
  • Namura pistons have MOS2 (Molybdenum/Teflon) skirt coatings, high-silicon aluminium and anodized domes.
  • A, B and C pistons are available to help extend the life of expensive Nikasil, SCEM, Boron Composite and Ceramic Cylinders.
  • Namura rings are made by Riken, the world's largest OEM manufacturer and are the same OEM rings used on more motorcycles and ATV's than any other brand.
Check Stock

Simply FP003 Premium Single Piston Foot Pump - Fast Fill for Tyres, Air Mattresses, Balls and Other Inflatables

  • DUAL PURPOSE - Double valve end which caters for Presta & Schrader valves up to 100PSI..
  • HEAVY-DUTY - Oversized pistons for strong, long-lasting pump action..
  • EASY TO STORE - Double locking for safe and secure storage..
  • DURABLE - Tough steel frame with extra-wide stance and rubber feet for stability in use..
  • EASY TO USE - Ergonomic tread-plate with rubber covering for grip..ACCURATE GAUGE - Analogue gauge shows PSI and BAR..ADAPTORS INCLUDED - Three adaptors included for bikes, most cars, motorbikes, all rubber buoys, all kinds of balls, water beds etc..
Check Stock

Revell 85-8883 1/4 Visible V-8 Engine Plastic Model Kit, 12-Inch

  • Rubber fan belt with vinyl ignition wires.
Check Stock

Nike Air Zoom Winflo 7 Mens Casual Running Shoe Cj0291-003 Size 11.5

  • Heel counter helps your foot feel secure..
  • Forefoot pistons allow greater underfoot response..
  • More foam offers a springier feel and is responsive and durable..
Check Stock

2 SPI Pistons & Top End Gasket Kit 1986-1999 Polaris 500 Indy Trail 488cc 72mm Fan Cooled

  • Namura pistons are made to exact OEM specifications and are direct replacements for OEM pistons with no modifications or dimensional adjustments needed.
  • Piston kits come with the piston(s) individually wrapped, a set of OEM quality rings packed in their own box, wrist pin(s), and circlips.
  • Namura pistons have MOS2 (Molybdenum/Teflon) skirt coatings, high-silicon aluminum and anodized domes.
  • A, B and C pistons are available to help extend the life of expensive Nikasil, SCEM, Boron Composite and Ceramic Cylinders.
  • Namura rings are made by Riken, the world's largest OEM manufacturer and are the same OEM rings used on more motorcycles and ATV's than any other brand.
Check Stock