Reviews Bolted Bonnet Globe Valve

Johnson Controls VG7882ET Series VG7000 Bronze Globe Valve, Three-Way Mixing, Brass Trim, Union Sweat End Connection, 1/2\ Valve Size, 1.8 Cv

  • Elbow globe valve with rising stem and threaded bonnet for on/off actuation and flow control (throttling) in a pipeline.
  • Bronze valve body and disc for strength and corrosion resistance.
  • Pounds per square inch (gauge) (psig) rating of 200 for water, oil, and gas (WOG) and 125 psig for steam working pressure (SWP).
  • Threaded bonnet for reduced risk of leakage.
  • Female National Pipe Taper (NPT) threads on both ends for connecting to male threaded pipes.
Check Stock

homewinner Bonnet Poppet Repair kit fit for FEBCO 765-1 Replacement Part# 905-212 1 & 1-1/4 Backflow Preventer and Vacuum Breaker Part Number 905212 for FEBCO 765 1 & 1 1/4 Vacuum Valve

  • Instruction: Please apply the included grease on both threading of the bonnet part and bronze valve. Two pits on the outer ring of the bonnet part are....
  • OEM factory replacement part for FEBCO. Two Fit for FEBCO's Model 765 EVB 1" and FVB 1-1/4" vauum pressure breaker valve, vacuum breaker and backflow....
  • This it is a replacement part for original Febco part number 905212 FRK 765-BP 1-1 1/4 Bonnet Poppet Assembly. Please confirm your part number #....
  • Please note the 1" and 1-1/4" is NOT the outer diameter of the bonnet part! The desription of 1" and 1-1/4" is the orginal FEBCO 765 valve model name.....
  • Ready-to-Go kit, Includes bonnet, O-ring, spring, e-ring, washer, stem, rubber disc, poppet and oil bag. Easy to install, Free of Lead..
Check Stock

RP22734 Replacement Bonnet Nut Compatible with Delta R10000 Shower Valve

  • Compatible with Delta R10000 series shower valve.
  • Good build quality and come with solid, clean threads.
  • Must use a wire brush to clean-up the threads on the valve body & wipe off any grit before install bonnet nut. If clean, nut should turn easily and snug up without excessive force.
  • Recommend to replace bonnet when replacing cartridge so that you can assure seals are properly seated/compressed in the valve body.
Check Stock

RP64851 Replacement Bonnet Nut Compatible with Delta R11000 Shower Diverter Valve

  • Compatible with Delta R11000 shower diverter valve.
  • Good build quality and come with solid, clean threads.
  • Must use a wire brush to clean-up the threads on the valve body & wipe off any grit before install bonnet nut. If clean, nut should turn easily and snug up without excessive force.
  • Recommend to replace bonnet when replacing cartridge so that you can assure seals are properly seated/compressed in the valve body.
Check Stock

JQSKUNP Spiked Valve Cover Chrome Spikes Bolt M6X1.0 Engine Bay Dress Up Washer Kit for Honda Civic Integra RSX Engine H23A1 …

  • 【Applicable Models】Chrome valve cover bars fit for and SBC 283 305 327 350 383 400 engine, you can buy with confidence..
  • 【Applicable Generator】Valve hold-down tabs fit for all engines using 1/4-20 threaded bolts, not for bridge frames, and also fit for FE engines using 5/16-18 threaded bolts..
  • 【Load Distribution】Valve cover spreader bars help distribute the load on the bonnet bolts to better seal the bonnet gasket..
  • 【Stable Performance】Chrome 4 3/4in valve cover bars can press down the struts, with stable performance and long service life..
  • 【After-sales Service】Our store provides you with 100% new and high-quality valve spreader bars. If you have any questions, please tell us in time, we will solve it in the first time..
Check Stock

SCITOO 6340GPH Submersible Sump Pump 1.5 HP Industrial Sewage Cutter Grinder Cast iron Pump Included Float Switch

  • 【MAIN PARAMETER】This 24 GPM Air-Operated Double Diaphragm Pump with 1 Inch Inlet And Outlet. This powerful air-operated double diaphragm pump operates from 29 to 115 PSI. Features a 1in. inlet and 1in. outlet..
  • 【EXCELLENTCONSTRUCTION】Rugged construction - resists corrosion for reliable performance and long life. Bolted construction is designed for leak-free fluid handling. Easy access to ball checks and fluid caps for maintenance and repairs..
  • 【VERSATILE USE】The diaphragm pump with convenient operating are widely used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc.Warning!Can not use for corrosive liquid..
  • 【UNIQUE CAPABILITIES】Features an externally serviceable air distribution system and all-bolted construction. Modular air valve is stall-free,this low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time..
  • 【SAFETY & PROPER USE】The Diaphragm Transfer Pump is to be mounted upright during operation for user safety. This pump is designed specifically for Fuel Transfer of [ low viscosity petroleum fluids including diesel, kerosene, motor oil and some waste oil.].
Check Stock

Premium Double Gauge CO2 Regulator - Polycarbonate Bonnet

  • Commercial Dual Gauge Design with A 60 Psi and 2000 Psi Gauge Low Pressure Gauge..
  • Primary Keg Beer Regulator 5/16 barb Shutoff with Check Valve Ball Check Valve..
  • Gray Plastic Bonnet for Easy Pressure Adjustment..
  • Co2 Keg Brass Beer Double Gauge Regulator..
Check Stock

Taprite T-742 Double Gauge Co2 Kegerator Regulator

  • Commercial Dual Gauge Primary Keg Beer Regulator.
  • CO2, 60# & 2000# Gauge, 5/16b Shutoff (W/Ck Valve) Plastic Bonnet for Easy Pressure Adjustment Ball Check Valve.
  • High Pressure Gauge (Side) Indicates Co2 Tank Pressure Remaining (0-2000 psi).
  • Low Pressure Gauge (Top) Indicates Output Pressure to Keg (0-60 psi).
Check Stock

Valterra 7301 ABS Gate Valve, Black, 3\ Slip

  • APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off valve - Can be used with air or clean, gray or waste water - See description for specific applications.
  • KEY FEATURES: Unrestricted flow - Full port - 304 Stainless Steel shaft/paddle and handle.
  • SPECIFICATIONS: Maximum Pressure 6psi Open/10psi Closed - PVC with female Slip/Hub fittings which receive 6" PVC pipe.
  • REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle can be replaced by removing C-clip.
Check Stock

Dante Products FP.GV.PTR Pewter Floor Plate for Dante Globe Valve

  • Each floor plate is precision die casted and CNC machined for use with our Dante Globe Valves.
  • 2-1/16 Inch Shaft Length with 2-1/8 Inch diameter surface.
  • The mating valve thread for Dante Products floor plates is 1/2" -14 NPSM.
Check Stock

OTAUPRS 4 Pcs PVR32 Bolt-in Tubeless Tire Valve Stems Fit 0.453 Inch Rim Holes 90 Degree

  • 【HIGH QUALITY】:The Tire Valve stem are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested, improve the safety of your vehicle..
  • 【FITMENT】:The Brass Snap-in valve stem is standard diameter and is suitable for any passenger car, Light Trucks, Small Trailers, wheelbarrows, Lawn mowers, ATVs, and Motorcycles.
  • 【SPECIFICATION】:Premium EPDM Rubber&Brass Snap-in TPMS valve stem,Rim Hole Diameter in wheel:0.453inches(11.5mm).100 PSI maximum inflation pressure,Package:8PCS TR412 tire valve stem.
  • 【Easy to install】: With a bolted in design, this rubber tire stem is easy and convenient to install, keeping the tire inflated at a constant pressure level and allowing quick check of PSI.
  • 【GOOD After-sales Service】:Please feel free to contact us if you have any question with the tire valve stem,90 days free return or refund..
Check Stock

Cozyel Air-Operated Diaphragm Pump Double Diaphragm Pump 1 inch Inlet & Outlet Air Diaphragm Pump Dual Diaphragm Air Pump Aluminum 35 GPM Max 120PSI QBY4-25L

  • Inlet/Outlet Port Size/Standard 1 inch (25 mm).
  • [Quality Performance]--Maximum Head: 275.59FT/84M, Max Temp : 150 ℉, Max Pressure: 120PSI. Top quality glyd ring, a double-acting seal that delivers better performance. 1/2 inch air inlet with NPT fitting uses standard shop air for easy operation..
  • [EXCELLENT CONSTRUCTION]--Rugged construction - resists corrosion for reliable performance and long life. Bolted construction is designed for leak-free fluid handling..
  • [UNIQUE DESIGN]--Features an externally serviceable air distribution system and all-bolted construction. Modular air valve is stall-free, this low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time..
  • [VERSATILE USE]--The diaphragm pump with convenient operating are widely used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc..
Check Stock

Dante FP.GV.FB Flat Black Floor Plate for Dante Globe Valve - 1/2\ Threaded Mating Valve

  • Each floor plate is precision die casted and CNC machined for use with our Dante Globe Valves.
  • 2-1/16 Inch Shaft Length with 2-1/8 Inch diameter surface.
  • The mating valve thread for Dante Products floor plates is 1/2" -14 NPSM.
Check Stock