Reviews Bolt on Torque Clamp

AKIHISA 4 Pack 26-28mm ID Range T-Bolt Hose Clamps 304 Stainless Steel Heavy Duty Adjustable Tube Clamp1 to 1.1 Inch

  • [Clamps Size] T bolt clamp adjustable work range 1.02-1.1" (26mm to 28mm).
  • the screw bolt M6*40mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products..
  • [Premium Material] T bolt hose clamp (including the band, housing and screw) is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
  • [Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
  • [Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [Wide Applications] high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..
Check Stock

TOTALFLOW 3 TF-JB60 304 Stainless Steel Butt Joint Exhaust Muffler Clamp Band-3 Inch

  • Butt Joint exhaust Muffler clamp band 3". check product details below for other sizes..
  • Seal Muffler Inlets, outlets, elbow joints, pipe.
  • Uses a reaction block that transfers bolt torque into clamp strength.
  • Available in a wide range of styles and sizes.
Check Stock

TOTALFLOW 3' TF-J60 304 Stainless Steel Lap Joint Exhaust Muffler Clamp Band-3 Inch

  • Loctite Lap Joint exhaust Muffler clamp band 3". check product details below for other sizes..
  • Seal Muffler Inlets, outlets, elbow joints, pipe.
  • Uses a reaction block that transfers bolt torque into clamp strength.
  • Available in a wide range of styles and sizes.
  • Made from quality material. TOTALFLOW is a USA - California based company.
Check Stock

TOTALFLOW 5' TF-JB64 304 Stainless Steel Butt Joint Exhaust Muffler Clamp Band-5 Inch

  • Butt Joint exhaust Muffler clamp band 5". check product details below for other sizes..
  • Seal Muffler Inlets, outlets, elbow joints, pipe.
  • Uses a reaction block that transfers bolt torque into clamp strength.
  • Available in a wide range of styles and sizes.
  • Made from quality material. TOTALFLOW is a USA - California based company.
Check Stock

TOTALFLOW 2' TF-JB56 304 Stainless Steel Butt Joint Exhaust Muffler Clamp Band-2 Inch

  • Butt Joint exhaust Muffler clamp band 2". check product details below for other sizes..
  • Seal Muffler Inlets, outlets, elbow joints, pipe.
  • Uses a reaction block that transfers bolt torque into clamp strength.
  • Available in a wide range of styles and sizes.
  • Made from quality material. TOTALFLOW is a USA - California based company.
Check Stock

Slide-Co 241947 Bed Frame Rail Clamp with 1" Frame, Small, Zinc

  • Constructed of heavy gauge steel and solid steel bolt fastener.
  • Clamp and bolt fastener comes finished in a corrosion resistant, zinc plated finish.
  • Used with 1-1/4 inch x 1-1/4 inch wide bed frame L-angle material.
  • Hand tightening should be all that is necessary for setting bed frame width, but pliers can be used for tightening with slightly increased torque if frame halves keep spreading easily.
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp, fit 1-1/8\ ID hose, Range: 1.38\ - 1.57\ (316-SSTC-35-40)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 1. 38" - 1. 57" (35mm-40mm).
  • Rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp, fit 1.25\ ID Hose, Range: 1.5\ - 1.69\ (316-SSTC-38-43)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 1. 5" - 1. 69" (38mm-43mm).
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 196, fit 6.75\ ID Hose, Range: 7\ - 7.31\ (316-SSTC-178-186)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 7" - 7. 31" (178mm-186mm). SAE # 196..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 68, fit 2.75\ ID Hose, Range: 3\ - 3.31\ (316-SSTC-76-84)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 3" - 3. 31" (76mm-84mm). SAE # 68..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 108, fit 4\ ID Hose, Range: 4.25\ - 4.57\ (316-SSTC-108-116)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 4. 25" - 4. 57" (108mm-116mm). SAE # 108..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 188, fit 6.5\ ID Hose, Range: 6.75\ - 7.06\ (316-SSTC-172-180)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 6. 75" - 7. 06" (172mm-180mm). SAE # 188..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 32, fit 1-5/8\ ID Hose, Range: 1.89\ - 2.2\ (316-SSTC-48-56)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 1. 89" - 2. 2" (48mm-56mm). SAE # 32..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock