Reviews Bolt On Finishing Edge

2 Packs 5 Inch Spring Loaded Barrel Bolt Latch Pin, Heavy Duty Steel Sliding Door Lock for Doors/Cabinets/Chests, 2mm Thickened Interior and Outdoor Solid Hardware Latch

  • 1.Premium Material: Spring loaded latch pin is constructed of metal, powered finishing to protect against corrosion & rust. Bolt Diameter: 1/2" inch.
  • 2.Safety and Privacy: Barrel bolt designed for security applications on doors, gates, cabinets.
  • 3.Easy to Use: Black rubber handle cover for easy pulling and turning.
  • 4.Directions: Suitable for left, right, vertical or horizontal hand applications.
  • 5.Widely use: barrel bolt designed for security applications on Doors,Rear Gate,Chests,Cabinets,Utility Trailer,or Lock Pin.
Check Stock

4 in. H x 4-7/8 in. Dia Unfinished Solid Hardwood Round Bun Foot | 4 Pack with 4 Free Insert Nuts and Drill Bit

  • Set of 4 Bun Feet with 4 Free Insert Nuts and a Drill Bit. Bun Foot Size: 4 in. H x 4-7/8 in. Dia. Pre-installed 5/16 in. diam. threaded hanger bolt. 18 Threads per Inch Bolt (5/16-18).
  • Length of threaded bolt above base: approximately 1 in. to 1-1/8 in. Pre-installed 1/4 in. thick plastic slide on the bottom makes it easier to move furniture around.
  • Comes unfinished with beautiful natural woodgrain. texture. Can be painted, stained or faux finished to match your furniture.
  • Individually inspected for quality assurance.
Check Stock

Umbrella Corporation Mil-Spec Stainless Steel Replacement Phillips AR Grip Screw with Washer - Set of 4

  • INCLUDES: 2 steel punches, 1 with counter-bored tips to start roll pins and one with indexing tips to finish roll pins.
  • ACCURACY: Flat on one side for proper alignment.
  • NON-DESTRUCTIVE: Rubber over-molded to prevent damage to your firearm.
  • EASE OF USE: Start bolt catch pins easily with the starter punch and finishes installation flush with the finishing punch.
  • CONVENIENT: Contains both the starter and finishing punch.
Check Stock

Universal Roof Rack Cross Bars for Cars Without Rails, 51'' (Up to 54'') Black Aluminum Crossbars for Sedan/SUV/Pickup Truck w/Bare Roof, 150 lbs Capacity/1 Pair

  • Versatile Solution ► Universal roof rack comes with adjustable base and 3 different shaped clamps that will attach well to a wide variety of cars w/o side rails (naked roof).
  • Special Note ①► Make sure the span of the top of the roof edge (or gutters) is within 54''(137cm). Plus, make sure the width of door frame meets the 3 sized clips.
  • Quality Throughout ► Premium anodized-aluminium features strength and sturdiness on the universal car roof rack, and the powder-coated finishing will hold up well to the elements.
  • Easy Installation ► It’s an almost bolt-on universal cross bars for roof rack featuring an easy and quick installation. Accurate location and measurement are important and a second set of hands can be helpful.
  • Special Note ②► We highly recommend that check the tension between knobs and bolts regularly when travel with the roof rack bars and be sure to glue the end caps in.
Check Stock

Architectural Products by Outwater BUN88-UN 5-1/8 in. x 6 in. Unfinished Solid Hardwood Round Sofa Leg 4 Pack with 4 Free Insert Nuts and Drill Bit

  • Set of 4 Bun Feet with 4 Free Insert Nuts and a Drill Bit. Bun Foot Size: 5-1/8 in. H x 6 in. Dia. Pre-installed 5/16 in. diam. threaded hanger bolt. 18 Threads per Inch Bolt (5/16-18).
  • Length of threaded bolt above base: approximately 1 in. to 1-1/8 in. Pre-installed 1/4 in. thick plastic slide on the bottom makes it easier to move furniture around.
  • Comes unfinished with beautiful natural woodgrain. texture. Can be painted, stained or faux finished to match your furniture.
  • Individually inspected for quality assurance.
Check Stock

Architectural Products by Outwater BUN32-UN 1-7/8 in. x 3-5/8 in. Unfinished Solid Hardwood Round Bun Foot 4 Pack with 4 Free Insert Nuts and Drill Bit

  • Individually inspected for quality assurance.
  • Length of threaded bolt above base: between 1 in. to 1-1/8 in. approximately. Pre-installed 1/4 in. Thick plastic slide on the bottom making it easier to move furniture around.
  • Comes unfinished. Natural woodgrain texture unfinished. Can be painted, stained or faux finished.
  • Set of 4 Bun Feet with 4 Free Insert Nuts and a Drill Bit. Bun Foot Size: 1-7/8 in. H x 3-5/8 in. Dia. Pre-installed 5/16 in. diam. threaded hanger bolt. 18 Threads per Inch Bolt (5/16-18).
Check Stock

Mortice Lock

  • NEW INSTALLATION FIT – This lock set is perfect for interior doors with a 2-3/8" backset. INSTALLATION TIP - Use of thread locking adhesive on the set screw will keep knob from slipping.
  • BEAUTIFUL, TRADITIONAL GLASS KNOB LOCK SET - The E 2497 glass knob set is the perfect choice for replacing or updating interior door hardware. With a classic bronze plated steel trim and beautiful glass knob, it’s the perfect choice for your next project..
  • LEFT OR RIGHT HAND INSTALLATIONS – The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed on new and vintage doors..
  • REPLACe ANTIQUE LOCK SETS – This E 2497 Mortise lock set is the perfect choice for replacing knobs on old doors. No matter what interior door you’re fixing, this classic lock set will add the perfect finishing touch..
  • LOCK BOLT KEY – This entry door lock set is perfect as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside..
  • For all dimensional information please refer to the line art and compare to your needs before purchasing.
Check Stock

Rrina 160Pcs 304 Stainless Steel Finishing Cup Countersunk Washers Assortment Kit, 6#/ 8#/ 10#/ 12#

  • MATERIAL: Made of high quality 304 Stainless Stee, not easy to rust, anti-moisture, anti-oxiclation, corrosion resistant, acid/alkali ..
  • PACKING QUANTITY: 160Pcs finishing cup washer 4 sizes: 40Pcs for each 6#, 8#, 10#, 12#, clip-1Pcs..
  • SUITABLE FOR: Prevents a nut, bolt or screw from pulling through the material, finish washers are designed to accommodate the heads of a countersuck screw in order to provide a finished appearance..
  • PLASTIC HEAT SEAL PACKAGING: Practical and convenient of packing box. All of finishing cup washer packed in a durable and sturdy box, this box can be use for a storage box..
  • DURABLE DIVIDED STORAGE CASE: All finishing cup washer are packed in the box with size label and divider, easy to store and won't mix up..
Check Stock

3/16\ to 1/4\ Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 0.187 Inch Pipe Post Tubing Rod OD Cover - 1\ Inside Height. (25)

  • 3/16" to 1/4" Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 0.187 Inch Pipe Post Tubing Rod OD Cover - 1" inside Height..
  • VC Series Vinyl caps are extremely flexible and Pliable. Can stretch up to 1/16" larger for a snug fit. · These are durable protective closures which are ideal for use as thread protectors, dust and moisture seals, pipe and stud end, and for masking during painting or plating operations. · All caps are 1" tall / deep to provide a secure fit..
  • Slide these flexible caps on and they conform for a snug fit. Black Vinyl Round Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover.
  • The caps are 1" tall / deep to provide a secure fit . Made from soft PVC "rubber like" that will hold up for years of use. Round finishing caps for round tubing and rods make economical, attractive glides for everything from household and patio furniture to exercise equipment. As finishing caps they cover any scratches, burrs or distortions that may result from cutting operations. · In addition, they also provide protection against injury from sharp rod and tubing edges..
Check Stock

Designer's Edge Millwork Products by Outwater BUN27-UN 4-1/2 in. x 4-13/16 in. Unfinished Solid Hardwood Round Bun Foot 4 Pack with 4 Free Insert Nuts and Drill Bit

  • Set of 4 Bun Feet with 4 Free Insert Nuts and a Drill Bit. Bun Foot Size: 4-1/2 in. H x 4-13/16 in. Dia. Pre-installed 5/16 in. diam. threaded hanger bolt. 18 Threads per Inch Bolt (5/16-18).
  • Length of threaded bolt above base: approximately 1 in. to 1-1/8 in. Pre-installed 1/4 in. thick plastic slide on the bottom makes it easier to move furniture around.
  • Comes unfinished with beautiful natural woodgrain. texture. Can be painted, stained or faux finished to match your furniture.
  • Individually inspected for quality assurance.
Check Stock

(Pack of 25) Caplugs: 7/8\ to 15/16\ Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 0.875 Inch Pipe Post Tubing Rod OD Protective Cover.

  • (Pack of 25) Caplugs: 7/8" to 15/16" Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 0.875 Inch Pipe Post Tubing Rod OD Protective Cover..
  • VC Series Vinyl caps are extremely flexible and Pliable. Can stretch up to 1/16" larger for a snug fit. · These are durable protective closures which are ideal for use as thread protectors, dust and moisture seals, pipe and stud end, and for masking during painting or plating operations. · All caps are 1" tall / deep to provide a secure fit..
  • Slide these flexible caps on and they conform for a snug fit. Black Vinyl Round Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover.
  • The caps are 1" tall / deep to provide a secure fit . Made from soft PVC "rubber like" that will hold up for years of use. Round finishing caps for round tubing and rods make economical, attractive glides for everything from household and patio furniture to exercise equipment. As finishing caps they cover any scratches, burrs or distortions that may result from cutting operations. · In addition, they also provide protection against injury from sharp rod and tubing edges..
Check Stock

(Pack of 4) Caplugs 1-3/8\ to 1-7/16\ Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 1.375 Inch Pipe Post Tubing Rod OD Protective Cover

  • (Pack of 4) Caplugs 1-3/8" to 1-7/16" Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 1.375 Inch Pipe Post Tubing Rod OD Protective Cover.
  • VC Series Vinyl caps are extremely flexible and Pliable. Can stretch up to 1/16" larger for a snug fit. · These are durable protective closures which are ideal for use as thread protectors, dust and moisture seals, pipe and stud end, and for masking during painting or plating operations. · All caps are 1" tall / deep to provide a secure fit..
  • Slide these flexible caps on and they conform for a snug fit. Black Vinyl Round Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover.
  • The caps are 1" tall / deep to provide a secure fit . Made from soft PVC "rubber like" that will hold up for years of use. Round finishing caps for round tubing and rods make economical, attractive glides for everything from household and patio furniture to exercise equipment. As finishing caps they cover any scratches, burrs or distortions that may result from cutting operations. · In addition, they also provide protection against injury from sharp rod and tubing edges..
Check Stock

(Pack of 4) Caplugs 1-1/8\ to 1-3/16\ Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 1.125 Inch Pipe Post Tubing Rod OD Protective Cover

  • (Pack of 4) Caplugs 1-1/8" to 1-3/16" Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 1.125 Inch Pipe Post Tubing Rod OD Protective Cover..
  • VC Series Vinyl caps are extremely flexible and Pliable. Can stretch up to 1/16" larger for a snug fit. · These are durable protective closures which are ideal for use as thread protectors, dust and moisture seals, pipe and stud end, and for masking during painting or plating operations. · All caps are 1" tall / deep to provide a secure fit..
  • Slide these flexible caps on and they conform for a snug fit. Black Vinyl Round Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover.
  • The caps are 1" tall / deep to provide a secure fit . Made from soft PVC "rubber like" that will hold up for years of use. Round finishing caps for round tubing and rods make economical, attractive glides for everything from household and patio furniture to exercise equipment. As finishing caps they cover any scratches, burrs or distortions that may result from cutting operations. · In addition, they also provide protection against injury from sharp rod and tubing edges..
Check Stock