Reviews Boat Shackles

VEVOR Anchor Chain, 10' x 5/16" Galvanized Steel Chain, 3/8" Anchor Chain Shackle, 11650lbs Anchor Lead Chain Breaking Load, 9460lbs Anchor Chain Shackle Breaking Load, Anchor Chain for Boats, Ship

  • 【DURABLE GALVANIZED STEEL】- Our marine 10 feet boat anchor chain is made of galvanized steel 5/16" with two 3/8" bow buckles. Chain break load: 11,650 lbs. Shackles break load: 9,460 lbs. Increased durability of our chain will help properly set your anchor for years to come with superior construction..
  • 【6" EXTENDED ANCHOR CHAIN】- The heavy boat anchor chain has an additional 15 cm/6 inch based on 10 feet, which is convenient for you to use. If you are looking for a more reliable anchor chain, this is your solution..
  • 【TWO QUALITY BOW SHACKLES】- Large 3/8" galvanized steel bow shackles are designed to work with almost all anchor lines. Our thread bow shackles to avoid loosening and falling from the anchor chain..
  • 【RELIABLE ANCHOR CHAIN】- The use of an anchor lead chain enhances the anchor's holding power by keeping the shank parallel to the lake bed or seafloor, helping to eliminate unwanted pull-out or anchor freeing caused by wave motion or boat drifting..
  • 【WORK WITH DIFFERENT ANCHORS】- Our anchor chain can be used with almost all boat a....
Check Stock

Better Boat 4 Foot 1/4\ Stainless Steel Anchor Chain and Double Shackle Link Ends Marine Grade

  • PREMIUM STAINLESS STEEL: Our Marine Grade 4 ft stainless anchor line is made from 1/4" 316 Stainless Steel along with 2 bow shackles also constructed from 316 stainless steel. Unlike the galvanized chain alternatives, these boat anchor chain options are designed to last and avoid corrosion..
  • SAFE AND RELIABLE: Our double threaded bow shackle pins prevent the screw from coming loose and falling from the anchor chain. The chain is abrasion resistant and weighted to properly keep your anchor shank parallel with the sea floor. The chain offers a 5110lbs break load while the shackles offer a break load of 5510 lbs..
  • COMPATIBILITY AND FLEXIBILITY: Our large 5/16" stainless bow shackles are designed to work with almost all anchor rope. Works great with our separately sold anchor lines and their pre spliced stainless thimble. The screw pin anchor shackles with chain will work with traditional fluke anchors, box anchor, spade anchor and others..
  • EASY SEAMLESS UPGRADE: Whether your upgrading your boat anchors and looking for a more reliable anchor chain, or outfitting a new boat, this is your solution. Not all chains are created equally, and we completely stand behind our stainless chains to provide superior performance. This allows you to worry about the anchor ....
Check Stock

Double Braid Polyester Rope 5/16 Inch by 100 Feet White

  • Swivel eye snap shackles Polished for sleek appearance.
  • Marine 316 stainless steel snap shackles.
  • Quick release bail rigging swivle snap shackles.
  • Stainless steel swivel shackles, 3 sizes : 2-3/4"Capacity (WLL): 800 LBS,WT :0.3LBS/Pair.
  • 3-1/2""Capacity (WLL): 1200 LBS,WT :0.5LBS/PAIR,5""Capacity (WLL): 1800 LBS,WT :1.23LBS/PAIR.
Check Stock

10 Pieces Stainless Steel 316 Round Ring Welded 5/32\ x 1.5\ (4mm x 38mm) Marine Grade O - Ring (10)

  • Marine 316 stainless steel snap shackles.
  • Quick release bail rigging swivle snap shackles.
  • Stainless steel swivel shackles, 3 sizes :2-3/4"Capacity (WLL): 800 LBS,WT :0.15LBS.
  • 3-1/2""Capacity (WLL): 1200 LBS,WT :0.27LBS,5""Capacity (WLL): 1800 LBS,WT :0.90LBS.
Check Stock

NRC&XRC Pair 2-3/4IN(70mm) Jaw Swivel Eye Snap Shackle Quick Release Bail Rigging Sailing Boat Marine Stainless Steel Clip Pair

  • Swivel eye snap shackles Polished for sleek appearance.
  • Marine 316 stainless steel snap shackles.
  • Quick release bail rigging swivle snap shackles.
  • Stainless steel swivel shackles, 3 sizes : 2-3/4"Capacity (WLL): 800 LBS,WT :0.3LBS/Pair.
  • 3-1/2""Capacity (WLL): 1200 LBS,WT :0.5LBS/PAIR,5""Capacity (WLL): 1800 LBS,WT :1.23LBS/PAIR.
Check Stock

BASE WAVE Marine Quick Release Fixed Bail Sailing Rigging Shackle (2 Pack-2'') for Sailboat

  • 【High Quality】304 Stainless Steel D Ring Shackles, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, glossy surface, solid design, abrasion resistant, strong load-bearing..
  • 【Size】1/2 inch (12mm), Max Open Width: 1" (25mm), Working Load Limit: 800kg/1763lbs, Perfect for boats, jeeps, connect loose ends of cables, chains, tow straps and snatch blocks....
  • 【Use For】12mm screw pin anchor shackles, used for coupling chain and wire rope for camping, hiking, tie downs, towing, off road recovery and sailing hardware..
  • 【Applications】D ring shackles are used of connection accessories, apply to a variety of boat or household applications, could be also used in loading and unloading of goods, mining equipment, forestry machinery, land transportation, hoisting machinery and etc..
  • 【Package Included】Pack of 6 pcs 1/2 inch -12mm screw pin anchor shackles, one-way screw, bolt design, more sturdy, easy and convenient to use..
Check Stock

OSTARE Swivle Snap Shackle Quick Release,Marine Boat Sailing Bail Clip 2-3/4\

  • Materials:Swivel eye snap shackle made of 316 stainless steel, excellent seawater corrosion resistance and gurable..
  • Sizes : Stainless steel shackles 2.8 Inch (71mm),Capacity (WLL): 800 LBS,WT :0.15LBS..
  • Easy to use:The spring draw pin design, quick disassembly and assembly, easy to use.the tail ring can rotate 360 degrees to prevent the rope from knotting..
  • Application:Snap shackle allows for connection with dynamically moving parts.like boat,sailing,backpacks, key rings, chains, ropes, indoor and outdoor equipment, DIY accessories..
  • Package list:Bail rigging swivle snap shackles, pack of 2 pcs.
Check Stock

Florence Adler Swims Forever: A Novel

  • High-Quality Boat Mooring Buoys: Our Boat Mooring Buoys are made of premium marine-grade vinyl, UV-Protected, soft and pliable, not leave scuff marks on your hull. This vinyl material can make the fender easy to clean and resist stain to keep the bright color all the time..
  • Reasonable Size:Diameter (9.8inch),Height (12.2inch),Thickness (3.8mm).Even wall thickness for maximum strength and durability.Great for boats, luxury yachts(Recommended boat size - 15 to 40 Feet). Keep the boat from banging against the dock in heavy waves & winds..
  • Design with Large Line Holes: These Round Buoy Fender featuring large line holes(1-1/8in) to fit most shackles, Anchor Ring & Rope. The eyelets of boat fenders are reinforced, which means you don’t need to worry about that breaking in daily use..
  • Easy to use: Equipped with 1inflator,2needles to adjust Boat Bumpers to a desired pressure easily. The One-piece construction prevents it from splitting up, which makes the Boat Mooring Buoy not easy to leak..
  • Wide applications: The boat buoy is excellent for small boats, jet skis, yachts, boat docks, and yachts. Use as a mooring buoy for lake works well in identifying anchor location. It is also ideal for dock floats/fishing marker buoys/ water safety buoy/swim buoy..
Check Stock

Mxeol Claw Anchor 4.4 lb Pontoon Boat Anchors Galvanized with Stainless Steel Chain Shackles 1/4 inch (Silver, 4.4lb)

  • Boat anchor 4.4 pound is made of galvanized carbon steel with 2 meters stainless steel anchor chain 1/4 inch and ss shackles 1/4 inch..
  • Boat anchors kit claw anchor 4.4 lb with 2 sizes options: 4.4lb (2kg), 8lb (3.5kg)..
  • Sea anchor for boat is with ideal sizes. 4.4lb anchor fits 12 to 16 feet boats, 8lb anchor fits 17 to 24 feet boats..
  • Marine anchor fits most bottom types as boat sand anchor or shallow water anchor, etc., holds in a variety of seabed, The claw anchor sets quickly, stows easily on the bow roller..
  • Pontoon boat anchor is all purpose anchor which remains stable even when tide and wind conditions change..
Check Stock

Taylor Made Products 61149 Tuff End Inflatable Vinyl Boat Buoy, Orange, 18 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 61155 Tuff End Inflatable Vinyl Boat Buoy, Orange, 27 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 61152 Tuff End Inflatable Vinyl Boat Buoy, Orange, 21 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 1146 Tuff End Inflatable Vinyl Boat Buoy, White, 15 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock