Reviews Boat Motor Transom Saver

Extreme Max 3005.3852 Straight Transom Saver with Roller Mount - 21" to 31"

  • Straight boat transom saver mounts over the trailer's rear roller.Fit Type: Universal Fit.
  • Stabilizes motor and power trim to protect transom during trailering.
  • Rated for outboards up to 150 HP, Two-year replacement warranty.
Check Stock

Newport 9ft 6in Del Mar - Inflatable Dinghy Boat - Transom Sport Tender Boat, 4 Person - 10 Horsepower - USCG Rated, White/Gray

  • Innovative Transom Saver helps lessen stress on a boat’s transom when boat with an outboard motor is being trailered.
  • Reliably supports the cantilevered engine during transport.
  • Comes with a choice of mounts for the end attached to the trailer: roller bracket or trailer mount bracket.
  • Composite head securely holds the engine (For use with motors 100 HP and under).
Check Stock

Attwood SP-400-RB Adjustable Transom Saver, 23 to 35 Inches, Composite Head Holds Engine, Roller and Trailer Mounts

  • Innovative Transom Saver helps lessen stress on a boat’s transom when boat with an outboard motor is being trailered.
  • Reliably supports the cantilevered engine during transport.
  • Comes with a choice of mounts for the end attached to the trailer: roller bracket or trailer mount bracket.
  • Composite head securely holds the engine.
Check Stock

Pro Controll EZ Stand Universal Transom Mount Trolling Motor Storage Base with Stand

  • SECURE STORAGE: Keeps your trolling motor secured upright and protected from damage.
  • Supports a wide variety of hand controlled transom mount boat motors.
  • HEAVY DUTY: Sturdy, rustproof metal stand for motor mounting.
  • Lightweight yet ultra durable fiberglass reinforced nylon base for maximum motor support.
  • SEAMLESS SETUP: Ready to use straight from the box.
  • Ideal for boat motor strorage in between fishing trips and off season.
  • SPACE SAVER: The compact base keeps your motor secure and space tidy.
  • Perfectly portable at 3 lbs and 1’L x 1’ W base.
  • Store on a shelf or cabinet when not in use.
  • Pro Controll is passionate about helping you find the freedom to fish your way.
Check Stock

attwood SP-410 Replacement Rubber Shocks Transom Savers

  • Replacement rubber pads for Swivl-Eze transom saver head.
  • Easy to replace when old pads/shocks are damaged or worn.
  • Black rubber, shock absorbing pads to help protect your outboard or drive when trailering..
  • Helps support the weight of the outboard or stern drive unit with trailering or in storage to relieve pressure from the boat transom or engine transom....
Check Stock

Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size

  • 3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
  • CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
  • FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
  • REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
Check Stock

Seamax Ocean430T Commercial Grade Inflatable Boat, 14ft. x 6.4ft, 5 Pontoon Chambers, Aluminum Floor, V Bottom, Max Support 35HP Motor, Coast Guard Standard Reflective Tapes, Multi-Purpose (Red)

  • Boat dry weight 250Lbs, carry 10 passengers, max loading 2159Lbs.
  • Pontoon diameter 19.7 inches, 5 pontoon chambers and 1 keel chamber, Chambers with Hypalon type 4 layers overlapped seam, max pressure 3.6PSI (25kPa).
  • Short shaft 16”/ 82° & reinforced transom, Max 35HP motor, suggested 20-30HP.
  • Manufacturing Standard: Commercial grade boat fabric for main construction.
  • Four layers overlapped chamber seam structure (Feature Code: FOS).
  • Transom Stabilizer & Reinforcement Design (TSR).
  • Seamax special feature also including: Dual Heavy duty life lines.
  • Heavy duty boat bumper around the boat and bottom.
  • Heavy duty D-Ring & Towing Ring patches..
  • Features: Non-skid sectional aluminum floor system with side joiners, Fuel tank and battery box tie down fitting on the floor, Dual motor pads and heavy duty pontoon towing rings.
  • Transom to pontoon adapter fully reinforced, marine sealant is applied which resists leakage. Multiple D-ring kits installed on the inside of the pontoons, 3 x f....
Check Stock

Intex Seahawk 4 Inflatable Raft Set and 2 Transom Mount Boat Trolling Motors

  • Intex 12V Transom Mount Boat Trolling Motor | 68631E.
  • There will be no part of the lake out of your reach!.
  • Ideal for a wide variety of boats including these Intex inflatable boats:.
Check Stock

Mangrove Products: Boat Transom Saver, Outboard Motor Support, Single Ram Wedge, Boat Accessories, Transom Savers for Outboard Motor, Boat Motor Engine Support, Boat Saver, Pontoon Boat Accessories

  • ...boards with single ram hydraulic tilt systems (See Fitment Guide). The intended use is to support and brace the outboard motor when trailering to prevent any unwanted motor travel up and down when trailering, This unwanted movement can put damaging pressure to the tilt and trim unit's hydraulic system and boat transom without using wedge/block support..
  • ✅EASY TO USE: No drilling or special installation required, no need to bend over or get on your knees. Eliminate metal to skeg scrapping compared to metal transom savers. Simply tilt engine up, insert high pressure wedge into Tilt Ram piston, then tilt down and you are on your way. No metal, no worries of rust or corrosion and is safe to use in both salt and freshwater applications. No need for straps, rope, bungies, skeg support, or brackets. All you need is the high pressure wedge..
  • ✅UPGRADED DESIGN/HIGH PRESSURE SYSTEM: High Density EPDM rubber formula. Trial tested and constructed better by Mangrove Products. Compression testing over 1000 lbs of pressure, extended wedge length to aid in higher skeg ride height, withstand extreme hot/cold temps under compression, 10 inner notches for secure connection to ....
Check Stock

Pro Controll EZ Mount Trolling Motor Bow Mount Bracket

  • MORE MOUNTING OPTIONS: Fish from the bow like the Pros.
  • An mounting bracket that converts transom mount trolling motors to bow mount.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep.
  • PREMIUM DURABILITY: Constructed with stainless steel hardware and indestructible fiberglass reinforced nylon.
  • FAST SET UP: Simple and seamless tool-free installation.
  • Line up the lower bracket to the outside of the boat, screw clamps tight, and slide on the trolling motor.
  • UNIVERSAL FIT: Measures 9.5” L x 6.75” W x 9” H and weighs 6 lbs.
  • EZ Mount lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

Minn Kota 1820175 Trolling Motor Marine Battery Power Center

  • This battery box / power center contains easy access external battery terminals that allow trolling motor leads and charger leads to be connected to the battery posts without opening the box.
  • Protects your battery (not included) on a small boat, transom application (boats that do not have battery compartments).
  • Built-in, push button battery meter with 4 LEDs displays current “state of charge”.
  • 60A resettable circuit breaker connected to top.
  • 10A resettable circuit breaker connected to two accessory ports.
  • Ring terminals on inside battery connectors.
  • Compatible with group 24 and 27 size batteries.
  • Overall dimensions: 7" x 13.5" wide x 12" tall.
  • Motor center ideal for small-boat transom applications.
  • Easy-access batter terminals for connecting leads.
  • Built-in battery meter displays current "state of charge".
  • Designed to fit group 24- and 27-size batteries.
  • Offers pair of 12-volt accessory plugs and manual reset circuit breakers.
Check Stock

Boat Load Mate: Automatic Boat Latch Secures Boat to Trailer While Launching & Loading

  • ... your chance for accidents, injuries, and damage to your equipment. Boat-Load-Mate will keep you safe by reducing the amount of time that you and your boat spend in the hectic bottleneck area of a launch. Boat-Load-Mate enables you to get your boat in & out fast. Boat-Load-Mate automatically latches and catches the transom & protects your boat from falling off the trailer while on the ramp..
  • MANUFACTURED IN AMERICA: Boat-Load-Mate has been cleverly engineered and built for strength. Each unit is capable of securing 2,500lbs of direct impact. Use two units for vessels that weigh 2,500 - 5,000lbs. There is no need to use a boat trailer winch, tow ropes, or boat tie down straps to trailer while on the ramp. Of course, you should always use your ratchet straps and boat tie-downs, and a transom saver for transportation..
  • BOAT-LOAD-MATE IS ONE OF THE BEST fishing gifts for men & women with a small to medium-sized fishing boat! Fishing gear and boating equipment are excellent choices when looking for boat accessories gifts for men. Not many boat accessories & boating gifts can save time & make life easy. Other boat trailer parts like the drotto latch can be harder to install and are less compatible. Also, Boat-Load-Mate is half the price of other boat latches....
Check Stock

Launching the Capsule

  • Large Load Capacity: The boat launching wheels are designed to enable one people launching of an inflatable boat. The weight capacity of the 12"/30.5....
  • Durable Aluminum Alloy: Our inflatable boat launch wheels arms are made of durable aluminum alloy with CNC processing, which will hold up even under....
  • Quick Release Pins: The transom launching wheels are equipped with 2 pairs of sturdy quick release pins. The accessories play an essential role in....
  • Simple Installation: The dinghy transom launching wheels set is easy to operate, saving much time. You need to follow the steps in the picture, and it....
  • Extensive Application: The inflatable boat transom launching wheel is widely applicable to most boats with a transom, such as Jon boats, dinghy,....
Check Stock