Reviews Blow Mold Product

Bell STANDARD Tube 700c x 25/32 Presta

  • Mold cured rubber for consistent side wall–prevents high pressure blow outs.
  • High quality, reliably tested inner tube.
Check Stock

Electronic Specialties 193 Black 2.5' x 5' 12/24V Diagnostic Relay Buddy Pro Test Kit

  • Tests 5 different relays, both 12V and 24V and 3 diagnostic trouble codes help define the cause of the bad relay.
  • Kit Includes 5 Relay Adapters and blow mold case.
  • Fails bad relays - Good/Bad indication, green light for PASS, red light for FAIL with flashing trouble code.
  • Tests 5 different relays, both 12V and 24V.
  • 3 diagnostic trouble codes help define the cause of the bad relay.
  • #193 Kit Includes 5 Relay Adapters and blow mold case.
  • Quick off-the-car relay tester - checks relay coil & switch contacts.
Check Stock

CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
  • 5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread.
  • Front Hub puller, Rear Axle puller, Locknut Cone.
  • Dent puller screws (large and small), Supplied in blow mold storage case..
  • Features: Internal and External Three Leg and Two Leg jaw puller yokes..
Check Stock

Office Star Resin Folding Table for Banquets, Picnics, and Parties, 36 Inch, Square

  • 36” square folding table features a heavy-duty blow-mold light grey resin top for durability and easy cleanup.
  • Resin surface is waterproof, scratch, and impact resistant, making this multi-purpose table ideal for indoor or outdoor use.
  • Grey powder-coated steel tube framing for strong long-lasting use and lightweight portability, non-marring leg tips protect floor surfaces from scuffs and scratches.
  • Product arrives fully assembled and ready to go for your next event.
  • Meets or exceeds test standards (BIFMA and MTL) 350 lbs. evenly distributed.
Check Stock

Office Star Resin Multipurpose Rectangle Table 4-Feet Long Height Adjustable Center Folding Table

  • 4’ Folding Resin Table offered with heavy-duty blow-mold light grey resin top for durability and easy cleanup.
  • Resin surface is waterproof, scratch, and impact resistant, making this multipurpose utility table ideal for indoor or outdoor use.
  • Light grey powder-coated steel tube framing provides strong long-lasting use and lightweight portability.
  • The 4’ table folds at center and includes a locking latch design along with a handy built-in handle for easy set-up and transportation.
  • Product arrives fully assembled and ready to go.
Check Stock

Fairly Odd Novelties Grenade Shaped 3D Mold Fun Bomb Military Ice Maker Gift, One Size, Green

  • EXPLOSIVE PERSONALITY! - This mold creates one huge, grenade-shaped ice cube that is sure to get people talking!.
  • A BIG BANG! - While it only makes one cube, it's massive and sure to keep your drink cold for a long time!.
  • MORE THAN ICE! - This tray makes great ice cubes, but also can make fun chocolates, candies, jellies, soaps, or any other mold-able item!.
  • BE THE HERO! - If you like action movies, explosions, or just fun novelty items that make you feel like a badass, you need this in your collection!.
  • AN EXPLOSIVE GIFT! - This ice mold/maker is sure to blow everyone away at any birthday, white elephant, office, or secret Santa party and be the gift to beat!.
Check Stock

Set of 2 Accessory Cord with One Led Light Bulb 6Ft Blow Mold Light Indoor String Lights C7 Lamp with Spare Fuse for Halloween and Christmas Decorations Craft Village House Decoration

  • ☃【Blow Mold Light Cord with Clip Bulb】The warm white led light bulb has stable lightness and temperature, C7 candle light bulbs fits for most....
  • ☃【Safe and Energy-saving】1W Led bulb lamp and Replacement Cord Blow mold light has lower power consumption and cooler touch, lower Watt but....
  • ☃【Modern Design for Easy use】The adjustable metal fixing and turn on/off switch allow you can fix it on the crafts easily and control the light....
  • ☃【2PCS Available Fuse Wires】Differ from others string led lights and couples bulb lights, ours has 2 built-in fuse wires in each plug for each....
  • ☃【Package Includes】2x led bulbs, 2 x cords with plug, 1x user manual, you can assemble it in few minutes. Warm Reminder: please make sure nice....
Check Stock

DHA Handheld Vacuum Pump Brake Bleeder Kit with Pressure Tester Gauge Adapters Set, Manual Pressure Bleed Brake Clutch System Fluid Vacuum Bleeder Bleeding Tool Kit Car Motorcycle Motorbike One Person

  • One man brake bleeding kit with check valve could be used on brake and clutch wheel cylinder/caliper, master or slave cylinder. to flush old brake fluid and air, and guide the new fluid to fill the whole brake system. Also they can help to pump out the power steering fluid..
  • Automotive abs brake bleeder vacuum pump: Equipped with vacuum gauge, simple operation, convenient readout of pressure Gauge. Pressure range: 0-30inHg, 0-760mmHg. Can test and diagnose a wide variety of brake systems on motorcycle car truck..
  • Brake Fluid bleeder set includes: hand pump with gauge, reservoir jar with 2 lids, 4 transparent hoses, 8 adapters and blow molding case..
  • Carry Case is made by high quality material, durable and rugged, Contained in a blow mold case for easy transportation and storage..
  • We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern..
Check Stock

Christopher Radko SWEET TREE Ornament

  • When Santa bakes, you know it's made with love – and a little Christmas magic! He's showing off his latest sweet creation from the North Pole bakery..
  • For over 30 years, Christopher Radko has captured hearts of millions with extraordinary hand-crafted ornaments. Radiance & originality of each piece brings joy during holiday season. We use centuries-old techniques to blow,silver,hand-lacquer& embellish every ornament. It begins from creating a 3D mold from clay, inspecting each curve & indent of the mold to make sure it is absolutely impeccable. A sand-cast model is then made from molten metal & production process officially begins..
  • Official Christopher Radko Ornament from the 2022 Collection. This Ornament is carefully packaged in an official Christopher Radko Gift/Presentation Box for easy gifting and storage..
Check Stock

Torin T90413 Big Red Hydraulic Bottle Jack with Carrying Case 4 Ton 8,000 lb Capacity

  • Hydraulic bottle jack designed for residential and commercial use.
  • Wide, rugged base enhances stability and strength.
  • Meets ASME safety standards. Product Dimensions (LWH) for jack and storage case- 7.4 x 4.72 x 11.02 inches.
  • Features a lifting range of 7-1/2" to 14-5/16"" with a 4 ton (8, 000 lb) capacity.
  • Adjustable screw top extension adds versatility.
  • Engineered using a drop forged alloyed steel construction with reinforced stress points for added durability.
  • Inner/outer welded structure delivers leak-free performance.
  • Smooth, glide-action pressure pump is designed to lift with minimal effort.
  • Hydraulics are powered with a high-quality oil, offering corrosion resistance.
  • Serrated, heat-treated saddle provides a generous lifting area and a secure grip.
  • Includes a plastic blow mold carrying case for easy storage.
Check Stock

3 pcs 1/18" to 3-1/2" Exhaust Pipe Expander/Pipe Stretcher Kit/Muffler Pipe Expander/Tail Pipe Expander

  • ◇ Important : The previous product quality was not very good, we have asked the factory to improve the product quality, now the product quality is better than the previous one, please don't worry. If there is any quality problem, please contact us in time.
  • ◇ Features : This Tail Pipe Expander set includes three different expander sizes, can work to all 1-1/8inch to 3-1/2inch ID thin-wall pipes.
  • ◇ Funtion : The 3-Pieces Pipe Expander Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches.
  • ◇ Easy to use : Designed to quickly and easily straighten out clamp dents in mufflers .A simple wrench turn expands pipe for exhaust system repair and installation.
  • ◇ Contents: 1 X Small Expander: 1-1/8" to 1-3/4" 1 X Medium Expander: 1-1/2" to 2-1/2" 1 X Large Expander: 2-1/8" to 3-1/2" 6 X Extra O-Rings 1 X Blow Mold Storage Case.
Check Stock

Nambe Deck the Halls Star Tree Topper

  • Glistening with all the colors of the rainbow, this fabulous tree-topper will crown the best of Christmas trees! Impress your guests and add the finishing touch to your festive tree! Official Christopher Radko Ornament.
  • For over 30 years, Christopher Radko has captured hearts of millions with extraordinary hand-crafted ornaments. Radiance & originality of each piece brings joy during holiday season. We use centuries-old techniques to blow,silver,hand-lacquer& embellish every ornament. It begins from creating a 3D mold from clay, inspecting each curve & indent of the mold to make sure it is absolutely impeccable. A sand-cast model is then made from molten metal & production process officially begins..
  • This Ornament is carefully packaged in an official Christopher Radko Gift/Presentation Box for easy gifting and storage.
Check Stock

Advantage Signature Elite Java Church Chair - 20 in. Wide

  • Add an upscale look to your sanctuary, banquet center or other venue with the rich colors and textures of today's stack chairs. These beautiful chairs come fully assembled for quick set up and are safe and durable enough to last for years.
  • 4.5" thick seat/ 3.5" thick back with 2 lb, 100% virgin polyurethane foam, 1" square tube, 16 gauge textured black powder coated steel frame, electrostatically applied epoxy frame finish, lightweight blow mold seat core and injected-molded back core.
  • T-NUTS to connect seats and backs to chair frame (stronger than wood screws), fabric durability- 200,000 double rubs (Wyzenbeek test), weight limit - 800 lbs. (static weight), CAL 117 fire retardant foam and fabric.
  • Lifetime warranty on frame failure due to broken welds, 15 year normal use warranty on foam and fabric.
  • PRODUCT MEASUREMENTS >>> Overall Size: 20"W x 27.5"D x 35.25"H | Seat Size: 20"W x 17.5"D x 19"H.
Check Stock