Reviews Blind Bearing Puller

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

BESTOOL Gimbal Bearing Puller/Gimbal Bearing Installer tool, Boat Alpha, Bravo, Omc Gimbal Bearing Puller Remover, Engine Alignment General Tool for Heavy Duty Bearing Puller

  • DURABLE & STURDY:Our gimbal bearing puller is made premium material. The color is black and oxide finish on all the parts to it..
  • EASY REMOVAL:This gimbal bearing remover tool allows easy removal of the Gimbal bearing..
  • BLIND HOLE PULLER:The blind hole puller locks into the inner race of the bearing..
  • EASY TO USE:This gimbal bearing puller remover is easy to use, turn the end of the tool with a wrench..
  • WIDE APPLICATION:Our gimbal bearing puller fits for Mercruiser Alpha, Alpha 1, MR, Bravo's, OMC Cobra's, Volvo's..
Check Stock

ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS

  • Premium Quality: The slide hammer puller set is constructed from drop forged steel with a fully chromed carbon steel slide hammer for maximum strength and longevity that resists rust and corrosion..
  • Specifications of The Bearing Puller Set: Overall length 15''/382mm, bearing extractor collets with internal capacity from 3/8"/10mm to 1-1/4"/32mm, bearing extractor 3/8"/10mm to 1/2"/14mm, 9/16"/15mm to 11/16"/19mm. 5/8"/18mm to 1"/25mm, 1"/25mm to 1-1/4"/32mm..
  • Great Function: Open clamps by turning handle clockwise to snug against the bearing, the blind bearing puller is great for pulling out evenly without damage the parts..
  • Wide Application: This pilot bearing removal tool blind hole bearing puller is ideal for pulling jobs,against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use..
  • Storage Case: The slide hammer bearing puller is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening....
Check Stock

ATPEAM 3 Jaw Inner Bearing Puller, Jaw Pilot Bearing Puller Auto Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV

  • 3-Jaw Puller Set: Ideal for Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Premium Material: The 3-Jaw Bearing Extractor Puller is made of strong carbon steel with black Oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Strong Puller Power: Structure design, gently turning the small wrench can produce a strong pull force.Removes all sleeve-type bearings with 1/2-2inside diameter..
  • Stable & Safe: The Blind Bearing Puller applies even pressure to preventing damage to bearings, also ensures stability during use.
  • Package Included: 1x 3-Jaw Inner Bearing Puller Tool. Size: 200x135mm. Wire rod length: 175mm. Bar length: 125mm. Arm length: 86mm..
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Bearing Removal Tool Set 16 Pieces

  • 16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
  • HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
  • the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
  • WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
  • EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
  • for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
  • BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check Stock

Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set 16PCS

  • 1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
  • 2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
  • the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
  • 3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
  • 4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
  • for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
  • 5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check Stock

Kanonaki 21in1Bearing Disassembly Puller Inner Hole Puller Removal Tool Three-jaw Puller Set

  • This bearing removal tool contains six different sizes of Puller, can remove a variety of different shapes, different sizes of bearings. Three new hooks are added to make disassembly easier and can be applied to more bearings of different specifications..
  • These Bearing Disassembly Puller are made from High quality alloy steel forged and for long-term durability under even punishing use. especially collet, after heat treatment process to handle even the most stubborn blind bearings and bushings without trouble..
  • This internal bearing puller can remove bearings of various specifications and sizes without damaging the removed parts..
  • For all kinds of bearings, just fit the appropriate collet, lock it into the inner race, and constantly Tighten the jack nut，the bearing can be easily removed..
  • All the tools are packed in a plastic carrying case keeps everything organized and easy to carry or store as needed..
Check Stock

KUNTEC 5pcs Blind Inner Bearing Puller Hole Pilot Bearing Gear Puller Slide Hammer Puller Set

  • Blind bearing puller is used to pull out evenly without damage the parts..
  • Bearing extractor collets with internal capacity from 3/8" (10mm) to 1-1/4" (32mm).
  • Easy to Use: Open the collets (clamps) by turning the T-handle clockwise until it fits snugly against the bearing, and then pull out evenly.
  • Bearing puller is made of chromed carbon steel for durability, overall length 15" (382mm). Bearing Extractor Size: 1: 3/8" to 1/2" (10mm-14mm).
  • Customer Service: If there is any other questions on this product, please contact us, we will reply in 24hours..
Check Stock

SCITOO 16PCS Blind Inner Bearing Puller Hole Collet Bearing Race Seal Puller Removal Tool Slide Hammer Tool Set

  • 【Compatible Vehicles】 Fit for bicycles, motorcycles, most compact cars, mid-size cars and light pickup trucks 8-53mm bore bearing. Includes various sizes and types of collets, blind, Internal, bearing puller, with wide application..
  • 【Package】 1x Sliding Hammer Assy, 1x 2 Claw Puller Assy, 3x Screw Adaptors, 10x Collects: 8-11mm 12-17mm 13-23mm 18-23mm 24-29mm 30-34mm 34-38mm 39-43mm 44-48mm 49-53mm 54-58mm, 1x Counter Stay Puller, 1x blow molded case for storage and carrying..
  • 【Product Usage】 Used to remove tightly jammed axles, wheeling bearings, and bushings on a wide variety of vehicles. This bearing puller tool is easy to operate, suitable for professional mechanics and DIY..
  • 【Advantage】 The SCITOO tool set has the best performance of high hardness and high toughness, durable and stable. The chuck is made of chrome molybdenum steel for excellent rust proof andcorrosion. You can buy with confidence..
  • 【Important Note】 We provide 1 year warranty for you. We will randomly send out red or blue portable case. When doing automotive maintenance always make sure all the tools are correctly used . Any question or problem, feel free to contact us..
Check Stock

CMTOOL Bearing Puller 3 Jaw Pilot Bearing Puller Blind Bearing Puller Set Bearing Pullers Bushing Gear Puller Small Inner Internal Bearing Puller Kit Car Motorcycle Wheel Pilot Bearing Removal Tool

  • 【Widely Used 3 Jaw Bearing Puller】This 3 jaw pilot bearing puller is widely used in automobile bearings, motorcycle electric car bearings, mechanical bearings, agricultural machinery etc. This bearing puller is easy to operate, easy to use and durable..
  • 【Excellent Design】The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure the bearing puller stability during use. The forged and heat-treated steel jaws in the bearing puller are coated with a corrosion-resistant coating to make them more durable..
  • 【High-Quality Pilot Bearing Puller】 The inner bearing puller is made of high-quality carbon steel through forging and special heat treatment process, so that our bearing puller has high strength, toughness and longer service life..
  • 【Strong 3 Jaw Bearing Puller】 The internal bearing puller has a sturdy structure, high-strength torque and high toughness. As long as the small wrench is turned slightly, it will generate a large pulling force, which can be slip-resistant and firmly grasped, saving time and saving when using (claw length 80 mm).
  • 【Precautions】 The claws of the bearing puller have positive and negative installation met....
Check Stock

BILITOOLS 15-Piece Bearing Puller Kit Ball Bearing Extractor Bearing Removal Tool Set

  • For the removal of bearings where normal pullers are unable to be used by locking into the bearing race itself..
  • For removing grooved ball bearings without having to dismantle the shaft..
  • Suitable for removal of a variety of blind bearings where traditional bearing and gear pullers will not reach..
  • Specification: Clamping width: 20 - 90 mm. Interchangeable heads: Ø 5.5 - 6 - 8 mm. Max. puller depth 200 mm. Suitable for use with ISO bearing sizes : 6004-6010 | 6201-6206 | 6300-6302..
  • Include: 1 x mechanical pressure spindle, 1 x cross-beam, 1 x center screw thread cap, 2 x side bolt with nut and washers, 2 x pulling bolt extension, 2 x extensions for pulling devices, 6 x adaptors.
Check Stock

OTC Tools 6981 Blind Hole Puller Set with Storage Case

  • OTC's 6981 Blind Hole Puller Set is a versatile solution for blind or "hidden" bearings in machinery and equipment commonly found on the factory floor....
  • Innovative expanding collets are placed through the bore of part to be removed then expanded with an actuator pin so that the lips of the collet....
  • The unique design of the pin adapter allows the option of using a slide hammer to pop the bearing or bushing from it's seat, or use with a pulling....
  • 5 Collet/Pin combinations: .300 to .350 inch (1.5 inches reach), .350 to .438 inch (1.5 inches reach), .438 - .563 inch (1.75 inches reach), .563 -....
  • Forged and/or machined at OTC's factory in Owatonna, MN.
  • includes easy to read component application chart and instructions.
Check Stock