Reviews Blade To Cut Hardie Board

Diablo by Freud D0704DH 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw Bld,5/8 Arbor, Multicolor

  • The only approved James Hardie polycrystalline diamond (PCD) tipped fiber cement saw blade.
  • The PCD triple chip design offers up to 60-times longer cutting life than standard carbide blades.
  • The laser cut thin kerf design gives fast and precise cuts with less dust and waste..
  • Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat.
Check Stock

SHALL Fiber Cement Siding Shear 4.8-Amp Hardie Board Cutter with 360 Degree Swivel Head Variable Speed & Continuous Cutting for Cutting Cement Board Tile Board Backer board 2700 SPM

  • Clean cut: Double cut design for creating a 5/16” curled thin strip during operation by the double-cut blade. Compared with manual saw and grinder....
  • 360 degree swivel head: Cutter head can be adjusted to a desired position for delivering comfortable cuts from any angle or direction. Offer....
  • Variable speeds: Speed (0-2700 SPM) is allowed to vary by users. Press trigger lightly to cut slowly and press trigger heavily to cut quickly. For....
  • Cutting capacity: Max cutting capacity is 5/16” (8 mm) and minimum cutting radius is 10”. In addition, applicable for cutting cement board, hardie....
  • Continuous cutting: The lock-on button can be used to lock the trigger switch ON at its fastest speed for users to reduce finger fatigue. For....
Check Stock

DEWALT ATOMIC 20V MAX* Circular Saw, 4-1/2-Inch, Tool Only (DCS571B)

  • Brushless motor of DEWALT circular saw allows you to cut up to 369 linear feet of 3/4-inch OSB using DCB205 battery (sold separately).
  • The cordless circular saw has the removable auxiliary handle for increased control.
  • The compact circular saw has a hang hook for increased convenience.
  • On-board blade key storage for hassle free blade changes.
  • 1-1/2-inch finger trigger allows users to choke-up on tool if necessary for their application.
  • Bevel gear allows users to cut 2x material at 90 degrees with a 4-1/2-inch blade.
  • Electronic blade brake stops blade quickly for safety and productivity.
  • Bevel lever gives user the ability to bevel at 45 degrees to cut 1x dimensional lumber.
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

Duo Fast, Pneumatic 0 Degree Coil Siding Nailer DF22C, 502950, Air Compressor Powered

  • Powerful Performance - Possesses high load coil capacity and switchable trigger, easily changes from bump to sequential with no tools..
  • Durable - Metal belt hook withstands the toughest job site and provides long-lasting use..
  • Lightweight - Only 4.5 lb. helps minimize arm fatigue..
  • Reliable - Tool-free adjustable depth of drive.
  • drives flush every time, no need to go back and caulk..
  • Versatile Application - Great for Hardie Board siding, fiber cement siding, wood fiber siding, cedar board siding, fencing, and decking..
Check Stock

RONGTER Electric Hot Knife Air-cooled Rope Fabric Foam Cutter with 8 Blades Hot Knife, Foam Cutter Cutting Tool for Cloth Ropes Belts Net Tube Foam Board Kt Board Leather Canvas

  • ... is recommended to rest for 1 minute after 5 minutes of use. We keep pursuing the 100% satisfaction of our customers. If for any reason you are not satisfied with your purchase, please contact us via message and we will provide the best solution for you.
  • ✅【HIGH QUALITY BLADE*8 TYPES】RONGTER Cutting Tool Kit includes 8 types of high-temperature and anti-corrosion blades. Arc blade--cutting cloth, leather, ropes.
  • Sharp blade-cutting acrylic sheets, different shapes.
  • Shovel blade--cutting plastic tubes, ropes.
  • ✅【PURE COPPER HEATING MOTOR】The pure copper knife holder of our electric hot knife can help heat quickly, convenient and easy to operate, improve work efficiency. During use, if you want to stop using, you can use the metal hook to hang our knife, and then take it off when you are using it. Convenient and save space.
  • ✅【PACKAGE INCLUDES】RONGTER Cutting Tool Kits include a RONGTER heat cutter, 8 types of blades, a hard plastic case, a spanner, and a cleaning brush. The hot knife can cut fabric, canvas, rope, foam board, plastic pipes, etc. Id....
Check Stock

CARL Professional Rotary Paper Trimmer 18 inch

  • Cuts up to 10 sheets of standard 20-pound bond paper.
  • Cuts mat board, card stock, plastic sheets, etc.
  • ideal for home office functions or craft projects.
  • Up to 11 different cutting blade patterns available -sold separately.
  • Limited lifetime warranty -excluding blade and cutting mat.
  • CARL Professional 10 sheet rotary paper trimmer with a solid metal calibrated base board, carbide blade, patented rail system and alignment grid and ruler..
  • Count on precise, accurate cuts with the premium carbide blade..
  • CARL Model number RT-218, cuts up to 10 sheets..
  • Patented rail system holds paper firmly to ensure a sharp edge and exact cut..
  • Sturdy metal base is calibrated and features preset measurements for common-sized items..
Check Stock

RIKON 7in. Wet Tile Saw

  • RIKON 14-700 7" Wet Tile Saw makes straight, angle, and bevel cuts in man-made tile, pavers and stone tile products. Features two-position beveling.
  • built-in water reservoir with drain plug to enable filling and no-spill emptying.
  • Cutting Capacity: 1-1/4" (32mm) maximum depth of cut at 90.
  • 9-1/4" (235 mm) maximum cut to right of blade.
  • 9-1/4" (235 mm) maximum cut to left of blade.
  • table bevel (2) 22.5 degrees & 45 degrees.
Check Stock

Freud D0704DH Diablo 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw BLD,5/8 Arbor (Single Pack)

  • Application: The 24T wood blade is suitable for all types of wood, plastic, particle board, MDF, hardboard and plywood cutting. The HSS metal blade best for aluminum, wood, PVC, and other non-ferrous thin sheet. The diamond blade is structured to be able to cut concrete, roof tiles, blocks, bricks, granite and all other tiles without any hassle.
  • High Quality: The tungsten carbide tipped blade and diamond tipped blade are made of excellent high grade quality steel material that makes it a robust, the HSS blade is made of high-speed steel, more durability.
  • Cut Smooth: Sharp saw blade cutters with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
  • Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of  3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
  • What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
  • saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5m....
Check Stock

CARL Heavy Duty Rotary Paper Trimmer 15inch - 12220,Black And Silver

  • Heavy-duty 36-sheet rotary trimmer with carbide blade, patented rail system, calibrated metal base board, adjustable magnetic paper guide and storage compartment..
  • The choice for the most demanding trimming projects..
  • The patented locking rail mechanism hold paper firmly in place while the Premium carbide blade ensures an accurate cut..
  • Cuts up to 36 sheets of standard 20-pound paper..
  • Adjustable magnetic paper guide hold materials on a calibrated sturdy metal base board.
  • Handy storage compartment for extra blades and cutting mats.
  • A spare cutting mat, straight blade and perforating blade are included.
  • Limited lifetime warranty -excluding blade and cutting mat.
Check Stock

Gypsum Board Cutting Tool Multifunctional Woodworking Panel Cutter with Tape Measure kt Board Cutting Tool Kit Includes 1 Gypsum Board Cutter, 1 Pencil and 5 Blades

  • ..., hanging pictures, cutting fabric, plywood and other places, with a wide range of uses.
  • It is also the nice gift choice for friends, famliy and craft lovers on birthdays or other holidays.
  • Package includes: the package comes with a piece of plasterboard cutters, a pencil for recording and 5 pieces extra replaceable blades, totally 7 pieces.
  • The built-in blade storage box will not touch the blade or hurt your hands, improving safety.
  • Save time and effort: the paper cutter is equipped with a tape measured up to 5 meters long, so you can easily grasp and accurately cut the required size.
  • It is also faster and more convenient to draw circles and straight lines.
  • With the strong locking device, you can easily measure and transfer to any material.
  • One measurement, one cutting, fast cutting, no dust.
  • Simple operation: only need to press the button and insert the blade to complete the installation.
  • When in use, pull the tape measure to the desired position and push the baffle by hand to accurately draw a circle or a straight line, fast and convenient.
  • It can be easily applied to both novices and skilled workers.
Check Stock

Pocket Kim Wisdom: Witty Quotes and Wise Words from Kim Kardashian

  • 96 Pages - 10/11/2016 (Publication Date) - Hardie Grant (Publisher).
Check Stock

Logan L267-100 Mat Cutter Replacement Blades 100-Pack

  • Cutter 45 & 90 degree bevel Mat Board Cutter, With 2pcs Free Replacement Blade.
  • Good To Make Decorative Frames For Pictures And Photos, To Make Architectural Models, And To Frame Artwork, Etc..
Check Stock