Reviews Blade For Cutting Vinyl Flooring

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

MantisTol LVP-231 8.9' Vinyl Plank Cutter ，for LVT/VCT/LVP/PVC/WPC/Rigid Core.

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor. The blade of our LVP-230 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners，most of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time to accompany your family！.
  • Straight cut, Angle cut, Notch cut, Rip cut and more . Clearly marked measuring guide. 0-45° Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it！.
  • 2.2mm thick 9” length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service life，this is a man-made damage and is not covered by the warranty! Or replace blade..
  • If you received the cutter that cuts less than 8mm thick, please remove the blade, clean....
Check Stock

MantisTol 13 Heavy duty Vinyl floor cutter LC-330,For WPC,LVT,VCT and Rigid Core Vinyl Plank.

  • Design for cutting LVP, WPC, LVT, VCT,PVC,SPC,Vinyl Plank Flooring. It can't cut Laminate,Engineered floor or other hard plank .So don't try to cut....
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • " L & 凵" cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle....
  • 3mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade....
  • If you find that you need a lot of force during the cutting process, need to repair the sharpness of the blade. Replacement....
Check Stock

Amazon Basics Tactical Folding Pocket Knife - Wooden Handle

  • Premium finish wooden handle contoured for comfortable grip.
  • Stainless steel blade offers good edge retention and corrosion resistance.
  • Best for general and precision cutting: box cutting, arts and crafts, cardboard, carpet, drywall, rope, vinyl, leather, flooring, and wood.
  • Backed by an Amazon Basics 1-year limited warranty.
Check Stock

CUTTEREX 13\ Free 360° Vinyl Laminate Floor Cutter for VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor and Rigid Core Vinyl Plank

  • ✅CUTS WIDE RANGE OF FLOORS: Cuts up to 13" wide on VCT, LVT, PVC, LVP, WPC, Vinyl Plank Flooring, Max. 6mm Cutting Thickness, Adjustable Cutting Blade Height saves operator strength. Cutting Any Unapproved Flooring Materials will be Out of Warranty.
  • ✅OUTSTANDING VALUE: Dust free, Quick, Quiet and Easy Operation. No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, NO Go Out and In House, NO Go Up and Down Staires, Time and Labor Saver..
  • ✅CUTS MMOST SHAPES ON FLOOR: Cuts at Free 360° angles, Straight Cut, "L" Cut, "П" Cut and Lengthwise Cut..
  • ✅STURDY STEEL AND ALUMINUM CONSTRUCTION: Plus Stop Fence and Angle Cutting Gauge..
  • ✅COMPACT DESIGN AND LIGHT WEIGHT: Easy to Carry and Move around..
Check Stock

Amazon Basics Folding Utility Knife - Lightweight Aluminum Body with Holster

  • Durable construction, stainless steel fold-out blade housing, and lightweight aluminum handle with comfortable anti-slip grip.
  • Lock-back design safely locks the blade in place when in use.
  • Compatible with most standard sized blades.
  • quick-change mechanism allows for easy blade replacement.
  • Best for general and precision cutting: box cutting, arts and crafts, cardboard, carpet, drywall, rope, vinyl, leather, flooring, and wood.
  • Backed by an Amazon Basics 1-year limited warranty.
Check Stock

WORKPRO 13\ Laminate Floor Cutter, Vinyl Floor Cutter for Laminate, Multi-layer Flooring, Parquet, Fiber Cement Wall Panels, Rubber Concave Base, LVT, VCT, SPC, LVP, WPC and Vinyl Plank

  • 【Multiple Cutting Materials】 This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
  • 【Sturdy Aluminum and Sharp Tungsten Steel Blade】 ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
  • 【Safe and Extra Accessories】 A chain to keep you safe while not using the laminate floor cutter. The graduated scale with metric and imperial scale can meet your need for different cutting, and you can choose the angles of 22.5°, 30°, and 45°.
  • 【Labor-saving and Comfortable Handle】 The telescopic rubber-covered handle allows you to use this lvp flooring cutter with less effort and a more comfortable grip.
  • 【Easy to Move】 Floor cutter with wheels makes your cutting job easier, you can move it without much effort. The quiet operation of the wheels provides you with a pleasing atmosphere.
Check Stock

ROBERTS 10-95 Cutter for Laminate, Engineered Wood, Carpet Tile, and Vinyl Floors, 25 in.

  • Guillotine-style cutter, cuts vinyl plank flooring, vinyl siding, VCT, LVT, WPC, Allure, laminate, engineered wood, carpet tile, MDF baseboard, rubber tiles and foam tiles.
  • Cuts flooring up to 25 in. wide, 17 in. diagonal and 5/8 in. (16 mm) thick.
  • Long-lasting 25 in. tungsten steel blade features a sharp cutting edge.
  • Swivel miter guide for 45-degree angle cuts.
  • Extruded aluminum support base with a comfortable, solid plastic working area.
Check Stock

18V ONE+ 5-1/2″ Flooring Saw

  • Includes: (1) PGC21B 18V ONE+ 5-1/2 in. flooring saw, 24T blade, blade wrenches, push stick, dust bag, rip fence, crosscut/miter fence, material clamp, and operator’s manual.
  • 5-1/2 in. 24-Tooth Flooring Blade (1-Piece): Durable Carbide Construction.
  • 5-1/2 in. 24-Tooth Flooring Blade (1-Piece): Great for cutting laminate.
  • 5-1/2 in. 24-Tooth Flooring Blade (1-Piece): Includes: (1) A06F551 5-1/2 in. 24-Tooth Flooring Blade.
Check Stock

WORKPRO 13\ Floor Cutter With Safety Knee Pads

  • Multiple Cutting Materials: This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
  • Sturdy Aluminum and Sharp Tungsten Steel Blade: ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
  • Sturdy Pads: The heavy-duty and non-slip shields are big enough to cover your knees completely, which can protect against cuts or scrapes on any terrain faithfully.
  • Ergonomic protection: The soft gel core and thick EVA foam padding cushion can provide extra knees support. The 600D polyester fabric with breathable mesh for all-day comfort even in summer.
  • Reinforced Stitching: The excellent stitching process with nylon threads ensures long-lasting durability of shell, gel and foam. The durable knee pads can ensures long-lasting safety of knees.
Check Stock

WORKPRO Laminate Floor Cutter With Work Knee Pads

  • Multiple Cutting Materials: This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
  • Sturdy Aluminum and Sharp Tungsten Steel Blade: ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
  • Sturdy Pads: The heavy-duty and non-slip shields are big enough to cover your knees completely, which can protect against cuts or scrapes from the stone, nails, glass shards faithfully.
  • Ergonomic protection: The soft gel core and thick EVA foam padding cushion can provide extra knees support. Helps reduce knee pressure from heavy work on hard floor or concrete.
  • Reinforced Stitching: The excellent stitching process with nylon threads ensures long-lasting durability of shell, gel and foam. The durable knee pads can ensures long-lasting safety of knees.
Check Stock

MantisTol 20-inch Pro Flooring Cutter MC-510,For Laminate Carpet tile Siding,Rigid Core Vinyl Plank and more；You are worth buying！

  • For Laminate, fiber-cement siding,MDF, Rubber, Carpet tile, LVT, VCT, LVP, SPC, PVC, WPC tile & plank, Vinyl Flooring and more, up to 510mm (20”)....
  • The max. cutting length: 510 mm (20 "), and max. cutting depth: 16 mm (5/8 ").Angle Cutting: 0-45,it will cut at 45 degrees on a 14 inch plank..
  • A shear blade , included a 600 Grit oilstone to keep sharp..
  • Straight cut and 45 degree angle cut. Clean and Straight cutting edg.（Fingers away from the sharp blade!）. No electricity, no dust, quick, quiet....
Check Stock

Dremel MM492 Universal Quick-Fit Cutting Assortment Pack, 3-Piece , Black

  • WHAT'S INCLUDED: (1) MM480 1-1/4" Wood Flush Cut Blade (1) MM482 1-1/4" High Performance Bi- Metal Flush Cut Blade (1) MM450 3" Wood and Drywall Saw Blade.
  • 15X LIFE BI-METAL MATERIAL: MM482 Bi-metal blade in wood with nails provide up to 15X life vs. standard bi-metal oscillating blades in wood with nails.
  • FLUSH CUT BLADES: Designed to make precise cuts to allow for installation of flooring or wall trim.
  • PERFECT FOR: Wood (MM480) and Metal (MM482) applications with flush cutting capabilities. The MM450 ideal for cutting openings in flooring for venting, repairing damaged flooring and cutting openings for electrical boxes.
  • UNIVERSAL COMPATIBLE SYSTEM: Dremel Universal Quick-Fit interface allows for our blades to fit nearly every oscillating tool on the market including Dremel, Bosch, Makita, Milwaukee, and Rockwell.
  • USA BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI.
Check Stock